Nordictrack elliptical removing side disk covers and crank arm

Nordictrack elliptical removing side disk covers and crank arm.
For assistance or parts email- [e-mail]
or visit WWW.FITNESSPARTSPRO.COM
For more videos, see my DIY channel:
/ @fitnesstechnologyserv...

[@garypinholster2569]

I'm working on my SE7i rear flywheel elliptical, I can't remove the side plates. They seem to be stuck on the shafts that attach to the pedal arms. I would sure love to see a video on one of these.

[@FitnessTechnologyServices]

Well I not familiar with that model . Send me some pictures of it to my email address Fitnesspartspro @gmail.com I will see if I can help Dave

[@juanllado7417]

Hello, thanks for the video, I have a machine and I tried to update and now it doesn't work. Thanks

[@MeR-md1jq]

Thanks for the video. I have a NordicTrack Elite 14.9 Elliptical 23944. I think I bought it in 2015. While using it today, it just sort of gradually lost tension....my leg movements just became kind of a thump, thump, thump tension free movement. The tension control on the handle shows that it increases when I push it, and I can hear something when I push the button, but nothing physically happens. Do you have any idea what the issue might be or what I should look at? Any advice would be appreciated. Thanks!

[@FitnessTechnologyServices]

Hmm you might have to open it up to see maybe the steel cable that pulls on the flywheel is broken. Even though you can hear the Resitance motor if the cable is broken it won’t work

[@MeR-md1jq]

@@FitnessTechnologyServices Thanks for the quick response. I took off the cover and it looks like the rubber drive belt is broken. Do you by chance have a video on how to replace it? Thanks.

[@FitnessTechnologyServices]

@@MeR-md1jq yep just subscribe and you will see lots of videos that might help. It is titled changing Nordic Track elliptical drive belt?

[@FitnessTechnologyServices]

Also if you can’t find one I can source it for you

[@MeR-md1jq]

@@FitnessTechnologyServices I ordered a belt from treadmill doctor. The old belt is 3/4 inch wide but the new one they sent me is only 1/2 inch wide. I emailed them and they said the belt will work. Is this true even though it isn't as wide as the old one? I'm skeptical.

[@juanllado7417]

Hello again, I need a micro SD card to reprogram my NordicTrack 23909.1 elliptical, iconservice is out of stock. Any other place you can recommend? Thank you

[@FitnessTechnologyServices]

I am sorry no the only other place I can think of is maybe fitness repair parts

[@durandus676]

My CX938 right crank in the rear, the rotation bolt shaft that weld snapped, I can’t figure out how to get the bolt out to remove the broken parts

[@FitnessTechnologyServices]

I’m sorry I don’t know that unit you can send me a picture to fitness Parts [e-mail] and I will see if I can help

[@RaMa-bi7tk]

Thanks, that’s good

[@FitnessTechnologyServices]

Thank you for viewing!

[@juanllado7417]

Nordictrack elite 10.9 elliptical.

[@FitnessTechnologyServices]

If it is a touchscreen then probably the software is crashed

[@juanllado7417]

Thanks😢