#palletbuild #pallethouse #pallets #palletbarn #pallet Instagram: / normalguydoesitall barn built by ballets. Yanmar sa424
Пікірлер: 260
@garryquiggins81832 жыл бұрын
I've seen this done before slightly different. We did a horizontal 2x4 (think top plate) on top of each row of pallets, double on very top. We went 3 pallets high, we built trusses on ground and lifted straight up into place using a hand cranked manlift (rented). Makes a fine building extra durable once metal is on. Your building is going to serve you well You should be proud of the build.
@normalguydoesitall2 жыл бұрын
Thank you! Nice to hear that. I am proud of my build and I hope the building serves me well, will be two years from the start of build soon. In retrospect, perhaps some things would have been done differently and better :))) Thank you!
@lanctcossin86012 жыл бұрын
I can appreciate your ingenuity while working alone to get the job done. I always find myself in that position.
@normalguydoesitall2 жыл бұрын
Thank you, Yes so it's usually, that I have to build alone but I can do it very well ;) Sometimes my brother helps me, but when the work of two men is necessary. Thank you again!
@coldspring6244 жыл бұрын
A man ,a mind and no regulations stopping his thought and creativity
@normalguydoesitall4 жыл бұрын
ha ha, thanks ;)
@dirtyharry49364 жыл бұрын
When sheeting a roof you might want to think about staggering the seams. It makes a much stronger roof and prevents sagging. Actually that applies to hanging any sheeting, not just a roof.
@normalguydoesitall4 жыл бұрын
Thanks for the advice, it was my first time doing a roof like this. ;)
@13daniel19744 жыл бұрын
@@normalguydoesitall always think of how you see a brick wall. Everything is "stepped" as it makes it much stronger. Still, a very good job.
@scubatrucker68062 жыл бұрын
I was thinking the same thing 👍
@scubatrucker68062 жыл бұрын
This barn idea is cool👍👍
@lakeside4412 жыл бұрын
Sheathing
@travelingkaspersworld40964 жыл бұрын
We like the detail on the ends of the rafters. Super!
@normalguydoesitall4 жыл бұрын
Thank you! Me too, i want the barn be beautiful too ;)
@lindacole16534 жыл бұрын
Watching. Can’t wait to see it completed. 🤗
@normalguydoesitall4 жыл бұрын
Thank you. Have you seen all three episodes? But there is still a lot to build, doors and Interior.
@zigtargonski23274 жыл бұрын
I like good overhanging roofs. keeps the weather off the building
@normalguydoesitall4 жыл бұрын
That's right, that's why I did it. Thanks!
@thomasschafer72682 жыл бұрын
Haha. Overhanging roof with osb. Moonshiner??
@carlosbetanzo6252 Жыл бұрын
Eso se llama ser inteligente cualquier persona no lo hace lo felicito por su trabajo
@normalguydoesitall Жыл бұрын
muchas gracias!
@jdgibs34464 жыл бұрын
Have enjoyed the build. Great workmanship. Appreciate your conscientious attention to detail and creativity. Looking forward to the completion. Blessings of safety, health, protection and success. ☝️🙏🇺🇸💪👉...
@normalguydoesitall4 жыл бұрын
Thank you!
@carlosdanger18432 жыл бұрын
Excellent, looks great! Years ago, I forgot to stagger the joints on a subfloor…oh well, we’re all still learning!
@normalguydoesitall2 жыл бұрын
Thank you! exactly, we learn all the time, especially from our own mistakes ;) Thank you again!
@kellyrabon43402 жыл бұрын
Great job and what a way to use you’re head to save money .I think I’m gonna start collecting the pallets from my job ,and build a shed for my motorcycles.Anyway thanks for sharing.
@normalguydoesitall2 жыл бұрын
Thank you! I saved a lot of money with this build. If you can get good strong pallets then you can definitely use them and it is a reasonable thing to do ;) Be sure to watch my other videos too. Thank you again!
@paulconti40644 жыл бұрын
Awesome job. your a hard worker(must sleep well) Thanks for sharing
@normalguydoesitall4 жыл бұрын
Thank you, i do. I can do all this thanks to my supportive husband. I always do my best. sure and more are coming ;)
@user-fd9wm2dj5d8 ай бұрын
mis respetos para este caballero una muestra de con pasión, esfuerzo, dedicación y creatividad se pueden hacer las cosas bien.
@normalguydoesitall8 ай бұрын
muchas gracias, realmente lo aprecio.
@tillmanfamilyfarm77594 жыл бұрын
Great job so far! We're building one as well. No pallets but so far I haven't bought anything. 30x40 pole bard. I did a short video on where we are with it at this point. I like your video. You may have inspired me to do one along the same lines.
@villu184 жыл бұрын
Thanks, nice to hear that i inspire someone, all the best to you ;)
@normalguydoesitall4 жыл бұрын
Thanks, from this channel to ;)
@stanleykeith69693 жыл бұрын
You should have put several sheets of ply score on the tractor and made less trips on the ladder. The More the Better. Just think what those sheets and 2x6x16 would cost you today with the way lumber prices are. Great Job. Can't wait to see the whole thing.
@normalguydoesitall3 жыл бұрын
Hey, good idea, but I didn't come up with that idea then. Currently yes this material is double priced, glad I don't have to build it right now. Thank you! watch my other videos, the barn is almost done ;)
@janetcurtis17274 жыл бұрын
Pretty clever with the strapping to lift roof boards!
@normalguydoesitall4 жыл бұрын
Thanks! It is difficult to do such things alone, you have to think of something good, the strap was useful
@antoniosanchez51863 жыл бұрын
P0
@Nas_Atlas2 жыл бұрын
I put a metal roof on my mobile home and now I feel like a genius. Cheap, quick to install, fireproof, no plywood required, 100% recyclable, will last forever with small amount of maintenance, attractive...
@normalguydoesitall2 жыл бұрын
Ok, good for you. I used a tar roof and I'm happy too. but even with care, a metal roof is not eternal ;) Thank you!
@jodihammond6329 Жыл бұрын
these videos are awesome.
@normalguydoesitall Жыл бұрын
Thank you!
@nobodynobody62162 жыл бұрын
Cool music. love it.
@normalguydoesitall2 жыл бұрын
Thanks!
@chriscarlisle47843 жыл бұрын
I'm amazed at how fast he works by himself
@normalguydoesitall3 жыл бұрын
Thank you, I always try to do things quickly and efficiently.
@user-rm2bg7vw9i3 жыл бұрын
Отличная работа!
@normalguydoesitall3 жыл бұрын
большое тебе спасибо!
@jacemusgrove30733 жыл бұрын
Again, bravo! Well done!
@normalguydoesitall3 жыл бұрын
Thank you very much!
@sgtsransom13 жыл бұрын
Other than not staggering the roof sheets, nice job.
@normalguydoesitall3 жыл бұрын
Ok, anyway thank you for watching!
@jasoni40904 жыл бұрын
We’ve been using our pellets to light fires, it only recently occurred to me that I could use them to build with 🤦🏻♂️ Need to build a barn for my goats, also in Estonia!
@normalguydoesitall4 жыл бұрын
Tere, they are also good for burning but also very good for building stuff. I use pallets for a lot of purposes and I have built many things out of them. The trick is that you need good pallets ;)
@sn95roots212 жыл бұрын
Well I am glad I read the comments. I need to stagger my roofing material as well as other seems. Good job.
@normalguydoesitall2 жыл бұрын
Nice, good for you ;) Thank you!
@robertjeglum46572 жыл бұрын
A very talented worker
@normalguydoesitall2 жыл бұрын
Thank you very much!
@abdalbateeh67663 жыл бұрын
Excellent job
@normalguydoesitall3 жыл бұрын
Thank you!
@billlevassiur58912 жыл бұрын
Nice build
@normalguydoesitall2 жыл бұрын
Thank you!
@danielrodela24203 жыл бұрын
Man is the ultimate machine. God Bless you. GREAT work! Oh by the way the next Untimate machine on earth is the _ _ _ _ _ _ _ _ _ _ _ _ ! Man's favorite machine. I'll let you guess.
@normalguydoesitall3 жыл бұрын
Thank you! can't guess, nothing comes to mind, what is it?
@willboor20072 жыл бұрын
Fantástico!
@normalguydoesitall2 жыл бұрын
Thank you!
@13daniel19744 жыл бұрын
and the music...it is still the same...sigh. But the project is so cool, I had to watch again. Thanks for sharing.
@normalguydoesitall4 жыл бұрын
Sorry about the music. Thank you for praising the work.
@didiercampoucy74853 жыл бұрын
@@normalguydoesitall ź
@davidwhite44743 жыл бұрын
I thought the music was better than most that are crap and so loud I rather hear the power tools . Explaining what the 2x4s were for in the walls would be nice ( I know and would have double them on each pallet ) . As for the roof , never run the seams like you done . There is no strength that way . Good build .
@normalguydoesitall3 жыл бұрын
@@davidwhite4474 The beams make the wall stronger and no more was needed there. The roof is strong and everything is very good, I'll put more beams under the rafters for support. Thanks!
@shanegeorge73442 жыл бұрын
That’s pretty cool give a good idea for to build my wood shed
@normalguydoesitall2 жыл бұрын
Thank you! nice that you liked it.
@MsBrommel2 жыл бұрын
very good idea,top
@normalguydoesitall2 жыл бұрын
Thank you!
@АлексейШиш-в2к3 жыл бұрын
Хорошая работа, удачи во всем:)
@normalguydoesitall3 жыл бұрын
большое спасибо. тебе тоже удачи!
@homerdiaz92892 жыл бұрын
Muy interesante felicidades y gracias por compartir saludos
@normalguydoesitall2 жыл бұрын
Muchas gracias por ver!
@BibiProvenceBBSmoothMusic Жыл бұрын
Awesome
@normalguydoesitall Жыл бұрын
Thank you!
@bobbydotson39263 жыл бұрын
Nice. You should have staggered the plywood on the roof so it would have tied all of the rafters in. Good job though
@normalguydoesitall3 жыл бұрын
Hey, don't understand what you mean, but the plywood are beautifully attached and the joints are on the rafters, and the whole roof is strong and fits nicely together.
@bobbydotson39263 жыл бұрын
Put the plywood down with a whole sheet then take and put another whole sheet 4 ft past the other one. It ties all of the rafters together. Still a great job
@Canbechangedtwiceeveryfourteen3 жыл бұрын
I don’t like how you railroaded your sheathing... but I love everything else!
@normalguydoesitall3 жыл бұрын
OK. Thanks, but can you tell me what i could have done better?
@Canbechangedtwiceeveryfourteen3 жыл бұрын
@@normalguydoesitall stagger your sheets of osb so all of you butt joints don’t fall on the same rafter. Like you bottom row full sheets, the next row up start with a half sheet then run full sheets til you get to the end which, for you, would’ve been another half sheet. And anytime you’re laying a cut sheet, make sure it always spans three rafters. If you just do like a 2ft piece which would only get nailed on the edges it will sag over time
@Canbechangedtwiceeveryfourteen3 жыл бұрын
@@normalguydoesitall staggering adds strength to the structure
@normalguydoesitall3 жыл бұрын
@@Canbechangedtwiceeveryfourteen I understand what you mean, but I'm not very worried about the strength of the roof that the tiles are placed this way, because the tiles are thick enough. But yes always can do better ;)
@suzannebazeghi56983 жыл бұрын
it is a very good idia hopefully i will make one.
@normalguydoesitall3 жыл бұрын
Thank you! i hope the same ;)
@abdalbateeh67663 жыл бұрын
Great job 👏
@normalguydoesitall3 жыл бұрын
Thank you!
@giovannimasdea11403 жыл бұрын
👍👍Bravo
@normalguydoesitall3 жыл бұрын
Thank you!
@ais_vi Жыл бұрын
Как здооооорово, мне очень нравится ваша работа 😍😍😍🔥🔥🔥 Напишите, пожалуйста, крыша из осб и фанеры, да? Или ошибаюсь?
@normalguydoesitall Жыл бұрын
Большое спасибо! да, крыша из осб.
@johnnymensi18654 жыл бұрын
Staggering is best and stronger
@normalguydoesitall4 жыл бұрын
Thank you!
@carlthornton30763 жыл бұрын
Very Good!!!
@normalguydoesitall3 жыл бұрын
Thanks again!
@stanleykeith69693 жыл бұрын
Put up a few sheets on the roof, you would not have to go up and down so much on the ladder. Nice Job, lots of hard work.
@normalguydoesitall3 жыл бұрын
Good advice, I could have done so though. Thank you very much!
@ДядькоСашко4 жыл бұрын
Красота
@normalguydoesitall3 жыл бұрын
Спасибо
@truthbetold44863 жыл бұрын
Really loved your video only problem with it was the repetitive music that kept going over and over drove me nuts but overall great build guys
@normalguydoesitall3 жыл бұрын
Thanks! yes put on mute if you don't like music, unfortunately not everyone can like it. Please also watch my other videos, thanks
@13daniel19744 жыл бұрын
And, now, a question...is that a rubberized roofing material? Or heavy tar? Never seen an application that used a torch. Interesting...
@normalguydoesitall4 жыл бұрын
Ok, this material is called something like that: weldable tar board, bitumen ruberoid. And it is mounted with a torch, Part of the tar is melted and it glues the material to the roof. It is very common on flat roofs in Estonia. Hope that was helpful. ;)
@AA-uu1yn4 жыл бұрын
In America this Roofing its called Torchdown. Its used on, or for a flat roof. Angled roof as this, use regular shingles, as they last longer, and break up the draining as the water hits it. The wind can blow off this roofing they are putting down, unless you nail it down. But on flat roofs, and with walls going up above it, the wind can not blow it off. This system they are using is much cheaper, than hot mop, and put the tar paper down, nailing it down, and hot mop tar over it. But on angled roofs you should use tar paper laid down, staple it down, then put shingles over that, and nail it down too. As it lasts much longer, and nailing them down they hold better, and looks nicer. There's lots of videos on here to show you how. As that roll out roofing is a cheaper, and faster way to do it, but its not as good, and does not last as long. Plus, it does not look nice like shingles. Also, the way they laid the plywood on the roof is not correct, as each course, you off set the ply by 4 foot, as it keeps the rafters or trusses from falling over, as there system is not correct for USA building. I would also use 2x4 up rights at each end of the pallets, as every 4 foot, cut flush with the pallets height, and in every corner, and top plate it all tying it all together. Maybe even double Top plate, and or with framing square type looking straps tying each corner together, and nailed or screwed to the top plate, as then the corners are secure. Doing a tie type system when you put on the plywood over the pallets. As tying the corners together, as lapping the corners. Where the pallets sit on top of each other - drill, and bolt the pallets together, with washers too. Plus plumbing the walls, and string lining the walls for strait, and bracing prior to putting up the rafters, and roof ply. Then once the ply is all nailed off, you can take your braces off. I would have gussets on each other to strengthen the rafters as make ply wood pieces, and nail on like a truss is built, and or build your own trusses on the ground, as they are much more stronger. There should be what they call Rat run of maybe two runs on the bottom cord of the rafters, or truss , a 2x4, as on top of it running the length of the building, as to tie it all together more. As if the garage is say 24' then go in from the out side walls in 8' foot, and it sets this at or around 8' spacing holding the bottom cord of your trusses, and Mark, and nail at 2' . Then one up by the peak of the roof right under the rafters, and nailed to the uprights at their layout of or around 2 foot., and running the length of the building, as to hold all them together. Then if at a 2' layout, your ply lands center of your rafters. Then take your braces down, once the ply on the roof is nailed down.
@13daniel19744 жыл бұрын
@@AA-uu1yn Very nice. Thanks for the explanation.
@bobcat84393 жыл бұрын
The first layer should be a vapor barrier on the roof second layer stops the rain. If ur using touch down roofing u should nail base sheet first it's fire resistant and it's a vapor barrier then touch down over the base sheet.
@normalguydoesitall3 жыл бұрын
Hey you're probably right, but i did it that way and it works, no leaks ;)
@ariannakors5417 Жыл бұрын
Great build but do remember ou side and roof braces to prevent twist collapsing.
@normalguydoesitall Жыл бұрын
Ok thank you! the roof is now 2 years old and everything is still good.
@tomekszkodnik45603 жыл бұрын
👍👍👍
@normalguydoesitall2 жыл бұрын
👍
@honeyy792 жыл бұрын
2 years later. How does it hold up? I want to make a rabbit stall this way :)
@normalguydoesitall2 жыл бұрын
Hey, two years in use and everything is fine, the walls are strong and the roof does not leak. that winter there were sheep inside, who were now moving to pasture. the pallets are very good to build and it is also suitable for rabbits. Thank you!
@ruteabrantes2203 жыл бұрын
Aprendendo com vc. Bom!!! Obrigado.
@normalguydoesitall3 жыл бұрын
Obrigado, é bom ouvir isso, é bom poder ajudar! / thanks, it's nice to hear that, good to be able to help
@MsAlisonWunderland2 жыл бұрын
Idea, make the rafters on the ground, save time and energy also safer and easier.
@normalguydoesitall2 жыл бұрын
Thank you! I know, i did it so be because I wanted everything to run straight and the ends of the rafters to be exactly the same size. Since the walls are made of pallets, not everything is perfectly straight, I straightened the roof line with rafters. thanks!
@stringventure3 жыл бұрын
Smart use of materials! How did you attach the pallets to that raised concert foundation edge?
@normalguydoesitall3 жыл бұрын
Hey, Impregnated beams are on concrete, and the beams are anchored to the concrete with concrete anchor , and the pallets are screwed to the beams on the concrete. I hope this helped.
@IamKyuTee Жыл бұрын
My husband asked why did you bring onky one sheet at a time fir the roof when that piece of equipment can hold more than one? He says it would have saved you time, fuel and wasted excess effort. Now I see you bringing more than one and showed mu hubby. Lol
@normalguydoesitall Жыл бұрын
Hey, yes I know that now, I did that with the garage roof. Thank you!
@felixjackson26702 жыл бұрын
Great stuff. Loved the idea. Had to turn the sound off though. Just horrible. Did my head in after a few mins. But loved the build.
@normalguydoesitall2 жыл бұрын
Thank you very much. I know it's hard to choose music for videos, some like it, some don't like it, but you can but it on mute and listen to your own music ;) Thank you again! Please watch my other videos to ;)
@raythackston19602 жыл бұрын
I saw you used metal joining plates at the top of the walls and where the rafters meet...but not on top where the rafters meet from each side ...why ??
@normalguydoesitall2 жыл бұрын
Hey, you're right, there I didn't use them. There is an upright support under the rafters and the rafters are fastened diagonally with long screws.
@mattr1723 жыл бұрын
This music is great!
@normalguydoesitall3 жыл бұрын
Thanks!
@ericlhomme-pk9qm Жыл бұрын
💪💪💪👏👏👏👏👏💯
@normalguydoesitall Жыл бұрын
Thank you😊
@khangamotsapi4 жыл бұрын
You pallet barn is inspiring i am going to build it what is that stuff you used for roofing
@normalguydoesitall4 жыл бұрын
Thanks, good to know, roofing is bitumen/tar cardboard.
@ChangexSonic3 жыл бұрын
Yakindan çekim de yapsaydiniz keske daha anlaşilir olurdu
@normalguydoesitall3 жыл бұрын
Hey, üzgünüm, ama yakından bakacak çok şey yok.
@ChangexSonic3 жыл бұрын
Paletleri yanyana ve üstüste nasil monte ettiginiz anlaşılmiyor..onun icin dedim..
@roscoeshepard3 жыл бұрын
Why not cut rafters the way you want them before you put them up. It's alot easier.
@normalguydoesitall3 жыл бұрын
yes, but i did like this. so that the ends of the rafters remain all the same length ;)
@vladimirvladimirovich80812 жыл бұрын
Меня очень удивляет погрузчик ! Его грузоподъёмность позволяет поднять только один лист плиты на крышу ? Неужели он не мог поднять сразу 10 листов ?
@normalguydoesitall2 жыл бұрын
хаха, это не я придумал. Спасибо
@chuckblack94104 жыл бұрын
Can't believe all that detailed work on the end of rafters on a PALLET BARN........REALLY????
@normalguydoesitall4 жыл бұрын
Thanks! Even a pallet house/barn can be beautiful ;)
@keithhogan69974 жыл бұрын
@Chuck Black ... build your own and post the video
@chuckblack94104 жыл бұрын
@@keithhogan6997 Why, I don't need a pole barn
@keithhogan69974 жыл бұрын
Then why bother to complain about it much less even watch in the first place? Do you complain to random strangers who put aftermarket wheels on their cars that you don't like, or anything else for that matter? The world has enough negativity going on. Why not build up rather than tear down. Or just move along and let things be.
@chuckblack94103 жыл бұрын
@@keithhogan6997 There's no way to explain my comment after your last comment. Your negativity will not let you stop for a moment and ask, what was he actually trying to say? Personally, it matters not what you do, but it was disappointing your skill could have been better applied and my thoughts were it would have gone further on a structure not using pallets. Furthermore, the FIRST amendment is my RIGHT also. But if I don't agree with you, that gives you the right to be intolerant........Sounds like what the liberals and democrats are doing, doesn't it???
@edwinoliver94912 жыл бұрын
Why didn't you stagger the decking. It's a rule of thumb you do it on sub floors and roofs. Other than that you're doing a good job to be doing mostly by yourself.
@normalguydoesitall2 жыл бұрын
Hey, I know that! But the dimensions of my roof and the gaps between the rafters were so strange that the decking would have bean very difficult, but I'm not very worried, this roof is strong. Thank you!
@user-jo5fz8iw3b Жыл бұрын
Why did you screw everything instead of using nails in some places??
@normalguydoesitall Жыл бұрын
Hey, I prefer screws for most jobs, but if you look at the third part, I use nails there. Thank you!
@user-jo5fz8iw3b Жыл бұрын
@@normalguydoesitall i prefer screws also but would you say there is a difference, advantage - between using screws vs. nails - cost ??
@brigittepeyraga34093 жыл бұрын
😍😍
@normalguydoesitall3 жыл бұрын
Merci
@luisbordon99554 жыл бұрын
Ja es un granero
@normalguydoesitall4 жыл бұрын
Hey, yes it is a horse barn.
@khrisallen7023 жыл бұрын
Why not cut the rafter tails before hand
@normalguydoesitall3 жыл бұрын
Hey, good question, I wanted to make sure that the ends of the rafters are all the same length from the building, that's why I cut them after installation.
@dorfone2 жыл бұрын
That would be a damn cold barn for a horse in the winter unless this was built in Florida.
@normalguydoesitall2 жыл бұрын
LOL. We live in Estonia and breed Estonian native horses that are actually used to living outdoors all year round, even in winter and in the cold. This barn has the idea that if something should happen then there is an indoor space where to put the horses, for example for therapeutic purposes. So thanks for worrying but no reason for that. Thank you!
@dorfone2 жыл бұрын
@@normalguydoesitall - I understand. We have ponies that live on Sable Island here in Nova Scotia, Canada. They live outside in the wild all year long no matter the weather.
@normalguydoesitall2 жыл бұрын
@@dorfone Hey, well you see then. In Estonia, too, native breeds live outdoors for the most part. And finer breeds, Arabs, sport horses, etc. are kept in stables. Thank you!
@clayed3 жыл бұрын
What were you doing with the weed burner on the roof activating some type of adhesive?
@normalguydoesitall3 жыл бұрын
Hey, this is a special torch, with it you melt/heat the tar on the roll, so that it attaches/glues to the roof.
@normalguydoesitall3 жыл бұрын
@ॐ no
@susanadecelis28053 жыл бұрын
Laburaste solo con el techo????????espero que alguien se le escape un lagrimón por como laburaste? (Bs As ARGENTINA o por lo menos allan orado por vos........................
@normalguydoesitall3 жыл бұрын
todavía solo, gracias por las oraciones
@АртурАхунов-м9с2 жыл бұрын
здравствуйте,а что вы ложили сверху ОСБ? не рубероид случайно?
@@normalguydoesitall спасибо, понял, интересно у нас есть такой
@peggybreaux89733 жыл бұрын
I would have liked to see more close up work.
@normalguydoesitall3 жыл бұрын
Thank you! I'm trying to improve myself on making videos ;)
@caminhoneiroborbainternaci8163 жыл бұрын
good
@normalguydoesitall3 жыл бұрын
Thanks!
@MustEnjoy_3 жыл бұрын
what did you use to connect the 1 st level of pallets to the 2nd layer of pallets?
@normalguydoesitall3 жыл бұрын
Hey, screws. I fastened with screws diagonally from the corners and in the middle where the blocks are. I also installed beams vertically between the pallets, which also connect the pallets together. Thanks for watching and watching my other videos too ;)
@leelawrence54204 жыл бұрын
how does it hold up to weather? will you enclose the walls?
@normalguydoesitall4 жыл бұрын
Hey, holds up well and the building is strong, i will enclose the walls ;) more videos coming.
@keshatton23343 жыл бұрын
I thought you said it was small?
@normalguydoesitall3 жыл бұрын
hey, well it is small, only 5,2m X 7,2 m. Thanks?
@enriqueangel5323 жыл бұрын
hOLA. ME PODRIAN DECIR QUE MUSICA ES LA DE ESTE VIDEO? GRACIAS
@normalguydoesitall3 жыл бұрын
Hola, music: Beasts Max LL . thank you ;)
@enriqueangel5323 жыл бұрын
@@normalguydoesitall Gracias pega fuerte
@enriqueangel5323 жыл бұрын
Bs as Argentina
@brigittepeyraga34093 жыл бұрын
Je voudrais bien avoir une maison comme cela
@normalguydoesitall3 жыл бұрын
merci mais construis alors;)
@dariopiec95524 жыл бұрын
Ta papa termozgrzewalna na dach nie jest dobra, nie lubi mrozów i wiatru , no chyba że pod blachę - no to wtedy może być , jakościowo jest to gorsze niz płyty faliste Onduline -których też nie polecam . Na dach już lepsza będzie najtańsza blacha trapezowa lub lepiej falista , bo i wygląda i nie boi się mrozu,wiatru i co najważniejsze jest przykręcona do dachu a nie klejona jak papa termozgrzewalna,którą niska temperatura i wiatr odkleja od dachu - ewentualnie sprawdzi się tam gdzie nie ma zimy .
@normalguydoesitall4 жыл бұрын
Dzięki za informację, ale właśnie miałem ten materiał. Ten materiał jest szeroko stosowany w Estonii. / Thanks for the info, but I just had this material. This material is widely used in Estonia.
@dariopiec95524 жыл бұрын
@@normalguydoesitall Sam pomysł na budynek i jego wykonanie doskonały. Bardzo pomysłowe wykorzystanie palet jako materialu budowlanego no i satysfakcja z dobrze wykonanej pracy jest bezcenna . Pozdrawiam z Polski i życzę następnych udanych projektów .
@normalguydoesitall4 жыл бұрын
@@dariopiec9552 Dziękuję, bardzo dziękuję. / Thank you, thank you very much.
@Jay-fk3fp Жыл бұрын
What the heck are the random screams in the music 😂
@normalguydoesitall Жыл бұрын
sorry for the music. Thank you!
@thenchousewife3 жыл бұрын
So overall how much did this cost?
@normalguydoesitall3 жыл бұрын
Hey, all the construction of the four videos cost about five to six hundred euros, a lot of material I got for free.
@thenchousewife3 жыл бұрын
@@normalguydoesitall lol I’ll have to translate that over to USD, but I’m hoping we can get a lot of pallets for free and then just enclose the entire thing.
@thenchousewife3 жыл бұрын
We’ll just have a mini in ours so it won’t be quite as large.
@CarlosAlberto-ii1li2 жыл бұрын
I would have blackjacked the roof first.
@normalguydoesitall2 жыл бұрын
Ok, I think the way I did is good also. Thank you!
@ddbronco18734 жыл бұрын
I subbed.... but we’ll have to see how long I can put up with the terrible background music 🤪
@normalguydoesitall4 жыл бұрын
Thanks! it’s hard to do something that everyone would like, whether it is music or content. if you don't like music, turn down the volume ;)
@Puhh364 жыл бұрын
väga hea
@normalguydoesitall2 жыл бұрын
Thanks!
@patriecephillips42894 жыл бұрын
What was the size of your building
@normalguydoesitall4 жыл бұрын
Hey, building size is 5.5m x 7.4m (18feet x 24feet)
@patriecephillips42894 жыл бұрын
Awesome job. Thanks.
@normalguydoesitall4 жыл бұрын
@@patriecephillips4289 Thank you!
@bobcat84393 жыл бұрын
Ur gonna be screwed if u have to tear that plywood up them screws will rust the heads will strip
@normalguydoesitall3 жыл бұрын
Maybe, but why should I want to remove those plates from the roof? and why would these screws rust?
@bulknuts2 жыл бұрын
Gotta ask, what are the pallet dimensions?
@normalguydoesitall2 жыл бұрын
Hey, of course ask. Pallet dimensions are 1.2m X 1.2m ;) (47 x 47 inch) Thank you!
@boobacockaa3 жыл бұрын
Noooooooo!!! Not that music again!,,,,,
@normalguydoesitall3 жыл бұрын
SORRY, use the mute button.
@mugurstefan682 жыл бұрын
Where is this ? Siberia ?
@normalguydoesitall2 жыл бұрын
LOL. NO, i`m in Estonia, look up Baltic countries ;) Thank you!
@jasonmolihan61 Жыл бұрын
I REALLY HATE THE NO WORDS THING!!!
@normalguydoesitall Жыл бұрын
I REALLY HATE THE POINTLESS COMMENTS! I'm not much of a preacher, and English is not my native language, so I'm not going to putter around with my accent. And you definitely don't understand my native language Estonian, So thank you!
@jasonmolihan61 Жыл бұрын
@@normalguydoesitall don’t be a whiny, snowflake, except my constructive criticism and better your channel.
@Gokywildcats11 Жыл бұрын
What's the dimensions of this build
@normalguydoesitall Жыл бұрын
Hey, 5.2m x 7.2m Thank you!
@alitlweird3 жыл бұрын
Amish guys woulda got that done in fifteen minutes.
@normalguydoesitall3 жыл бұрын
Yes, they work in a group of 100 people, i have built most of it alone ;)