Norton white tile engraving with LaserPecker 4 DIY TiO2 spray

Got to test out the LaserPecker 4 and see how is it different to other Laser engraver.
0:47 What is Norton White Tile method?
2:30 LaserPecker 4 wavelength output
03:23 What type of tiles
04:22 What type of Titanium powder
05:20 What type of sprayer
08:11 How much spray needed per tile
09:13 Spraying demo
10:05 LaserPecker Design Studio on PC
12:11 Engraving
15:49 Cleaning up
16:19 Finish products
“As an Amazon Associate I earn from qualifying purchases.”
amzn.to/3uje5QR LaserPecker 4 Deluxe + Interlock Cover
amzn.to/49GPpC9 Cordless Paint Sprayer
amzn.to/3QDP6za 700W HVLP Spray Gun
amzn.to/3QNxO2D Titanium Dioxide 100g Icing and Chocolate Whitener
Equipment I use for making videos:
Canon EOS R amzn.to/3uR9RLW
Canon EF-S 10-18mm amzn.to/3yhtf6I
Sony EZ-1 with Wide lens amzn.to/3kluLmn amzn.to/3XXp37G
IVISII 2 Pack 480 LED Video Light amzn.to/3tXGhDi
Saramonic Blink500 LAV mic amzn.to/3uQXbo8
JOBY JB01503-BWW GorillaPod amzn.to/3uRDf4t
Follow me on Instagram and Facebook / bensonchikphotography
/ bensonchikphotography

[@robertmoran9225]

You can engrave a vivid dark blue on tile and glass using 1 part Cobalt oxide, 1 part school glue, and 3 parts water. Substituting black copper oxide for the CoO yields a dark metallic copper on tile

[@BCreviews]

Thanks for sharing, I would love to try that

[@robertmoran9225]

@@BCreviews Depth 89 power 44% to depth 90 power 50% works pretty good. One coat is all that is needed. Also, ceramic glazes work pretty good for lighter colors (depth 87 power 8%) but are a bit tricky to apply. To thick, and the engraving washes off. to thin, and the color is to light. One more thing - the LP4 at 1064 will cut thin (0.03mm - NOT mil) aluminum tape (from Tapebear), in place, on wood and ceramic with three passes at 100% depth and power, 1064, so you can make what looks like metal inlays on wood. Two coats of varnish, sand smooth, lay the tape down but don't press it down, don't worry about small wrinkles, then engrave, carefully weed, then overlay with paper and burnish very firmly with a smooth object, like the back of a screwdriver handle. The wrinkles are all smoothed out and the tape is firmly adhered to the wood or ceramic. The result looks like a silver inlay and is quite robust. If you would be perfect, clear coat afterwards. If there is some way I can send pictures I can show you how well this works.

[@vaughanza]

Excellent , thanks

[@kendispoto6871]

Thanks for preparing this video. It has answered a lot of my questions. Have you come up with a frame method for displaying or mounting?

[@BCreviews]

I got wooden base and plastic base for plate display, works for tiles too