Norwood sawmill pm14 in realtime

[@songsfromthelord888]

Thanks for the video, Ottawa.🙂 I'm glad that you are able to make some boards to your liking! 🙂 Remember that God loves you and He wants you to love Him too and to keep His commandments. 🙂 Thanks again, Ottawa! 🙂

[@hjr927]

Thanks for the video was considering buying this for milling wood. Use alaskan granberg mill with 660 and ripping chain. Milled cherry no prob but did a 26 in ash and god that was alot of work. Usually never mill anything bigger than 18 or 20 in. Considering a bandsaw mill the chainsaw mill is back breaking work but this PM14 is pretty nice.

[@ottawamilling]

I also have a ms661 with 42" bar and 881 with a 64" bar. Definitely more work but this mill js only good for 14" log, maybe a little bigger. I hope to have a bandsaw mill one day as well.

[@garywood4262]

I really like that saw mill. Thanks for sharing that link.

[@jankorajh-e3u]

Good speciallist .

[@khembhandari7902]

I really like it i want to know the price full set of it.

[@jellystoma]

Enjoyed the video. Thanks for linking me to it. The cut speed isn't much different from an Alaskan but you sure do save your back. Also eliminates the some times fussy initial first cut setup. Appreciate you.

[@ottawamilling]

Thanks!! I also have a couple Alaskan mills with bigger saw. The 881 with biggest bar at 64". I got this little mill to make dimensional lumber. It's a little easier than my granberg edging mill. Just having fun milling using different mills!!

[@jankorajh-e3u]

@@jellystoma Kepp up the good work best regards.

[@subrotosenso4973]

Norwood sawmill beautiful Fren 💪👍

[@arfiannagha]

Awesome cool wood cutting ❤

[@ottawamilling]

Thank you!

[@brenth.hillier5796]

That is pretty sweet, have a wonderful day.

[@ottawamilling]

Thanks! You too!

[@nelsoncollar1814]

Just the right chain.

[@jellystoma]

Btw, what powerhead are you using? I could see a bit faster cut with a shorter bar pulling less chain.

[@ottawamilling]

Stihl ms661. That bar is 28". Recommended is 20" I think. It's just what I had !

[@stevt100]

Thats a right smart of fire wood you have in the background

[@nickhelton3439]

Damn look at the firewood I first thought it was a stone wall lol

[@ottawamilling]

Ha!! Ya. Lots of firewood. There is always lots!! :)

[@BanshiDharamallickAju]

Nice video

[@ottawamilling]

Thanks!! :)

[@ROBERTjones-yb8lv]

Nice cut

[@ottawamilling]

Thanks!! :)

[@ReynaDelaCruzHernández-i4k]

Me gustó adónde se puede conseguir la máquina y el costo de favor gracias

[@ottawamilling]

Norwood Sawmills makes and sells them. Model.is PM14

[@samuelcardis9441]

Please give me the link where I can see more Norwood and see the prices too thank you very much

[@ottawamilling]

This is the Norwood Web site. norwoodsawmills.com/en-ca/products/portamill-pm14-chainsaw-sawmill?variant=45330464571713

[@LaxmanGhale-z9l]

Wood machin price

[@ottawamilling]

You can check Norwood Sawmills website here. norwoodsawmills.com/en-ca/products/portamill-pm14-chainsaw-sawmill?variant=45330464571713

[@เอพี-อ5ฑ]

ต้องการสั่งซื้อราคา

[@ottawamilling]

Contact a company called Norwood Sawmills. I don't sell these, i just use the mill. You can find them on the Internet

[@Yechit-oo2cf]

good

[@СергейЕремин-ч4н]

Под верхнюю надо подсовывать клин, так легче пиле будет, при работающей пиле нельзя заниматься регулировкой запила

[@ottawamilling]

Those planks were not heavy enough to affect the saw . And I am not sure what you mean by not being able to adjust the cut

[@BillyNgalamutombo]

Comment trouver ça?

[@ottawamilling]

La compagnie qui a fais le moulin s'appelle Norwood Sawmills.

[@AllenPena-jb6xu]

Está interesante el diseño del aserradero,el problema es que por grosor de la hoja fe la motosierrs,"come" mucha madera.

[@ottawamilling]

All chainsaw mils are like that. There is a lot of sawdust. This is made to bring in remote places.

[@AllenPena-jb6xu]

@@ottawamilling In spanish,please...d'ont speak english.

[@ottawamilling]

Todas las motosierras son así. Hay mucho aserrín. Esto está hecho para traerlo a lugares remotos.

[@AllenPena-jb6xu]

@@ottawamilling Correcto,tiene razón,lo que me gustaría saber si es fabricado profesionalmente,o si es artesanal,se ve muy bonito,creo que vale la pena tenerlo.

[@ottawamilling]

Fabricado profesionalmente por una empresa llamada Norwood Sawmils.

[@StoptheLie]

Looks easier than snapping chalk lines and free cutting with a chainsaw.

[@ottawamilling]

Yes, much easier!! :)

[@nickhelton3439]

Something better than the ladder though , anchor the ladder down good

[@ottawamilling]

This was a temporary setup. The ladder is ow on some huge cants now to stabilize the mill.

[@AlsMar-u3w]

Quebuen.travajo.ace.esa.motocierra.como.ago.paraconprar.una.Armando.Aleman

[@VitaliyPanasenko]

Про техніку безпеки не подумали, декілька раз міг відрізати руки і зробити собі харакірі

[@ottawamilling]

No one else is around. .am dthere is a guard for the recommend bar which I is ,20". I'm using a 28" bar so I took the guard off. I am also being careful. It would be very hard to cut yourself while your pushing from far away. But yes, accidents do happen

[@johnjack766]

🤘🏽🎉

[@itapellepaiva2084]

Painoista päätellen nuorella miehellä virtaa.

[@MrSki-tyvm]

Thats 1 way for a few boards, not worth going cheap having so much wiggle, pull, and high maintenance. A cheap bandsaw mill is way, way better and not much difference between costs just after 6 months use with time spent on maintenance and setup times. Spend the extra 1 to 2 k to avoid the nightmare.

[@ottawamilling]

You can't bring a bandsaw mill in the middle of of no where. That's what this mill was meant for. I understand what you're saying but this is for a different purpose.

[@woodworkerGB12]

Good cutting

[@Алекс-Крас]

Если распиливать на доски, очень много уходит в опилки....

[@ottawamilling]

Yes. This mill is made to bring places where you cannot bring a bandsaw mill.

[@golubevanatoliy1316]

Верхняя часть бревна давит на шину пилы. Нужно убрать бессмысленную нагрузку. Пилите вертикально. Используйте принципы минимальной энтропии.

[@ottawamilling]

The bar is not long enough to sag. But I do see what you mean. This mill is made by Norwood Sawmills.

[@เอพี-อ5ฑ]

ขอเบอร์โทจะ

[@ottawamilling]

I don't sell the mill,. I just use it.

[@DragoBasevic]

Bez veze

[@AdelinoRodrigues-h5q]

😅 😅😅😅😮😅😅😊😊😊😊😊😊

[@Buddha-of8fk]

Probably work better with a Husqvarna. 😊

[@ottawamilling]

Possibly. I've only tried it with my ms661 and ms881. I do have a smaller Husqvarna, the 365 special but I only use it for cutting limbs and stuff.

[@rustyhaven1211]

Gonna try one Tues with a ported Echo cs800 I'll let ya know what happens!

[@Buddha-of8fk]

@@rustyhaven1211 If you could find an old P51 Pioneer.

[@ottawamilling]

The first time I milled, it was with a homelite xl-76. It did work!

[@Buddha-of8fk]

@@ottawamilling Our logging company ran Pioneer for a long time. Those P51 was torque monsters. I'm still bummed out and it's been probably 40 some odd years ago.

[@canalloucosc]

Não tem guerra sem vítimas inocentes kkkkkkkkk

[@Рус-ю6б]

Слабовато, жесткости нет и очень медленно. Но хоть не в ручную.

[@ottawamilling]

I will be installing it on some square cants to make it more rigid. It's perfect for milling lumber in remote locations.

[@DragoBasevic]

Bez veze