HP ProBook 4530s - Disassembly and cleaning

In this introductory video, we will show how to disassemble laptop HP ProBook 4530s.
Our team will show all necessary steps of disassembling, however don't hesitate to ask us if you have some questions.
Be careful this may damage your laptop or other equipment! We are not responsible for any damage to your device!
If you finding our video helpful to you, please don't forget to give us a Thumbs Up!

[@glahsmzlab6656]

Im Mozambica, i speak portuguese! Bom dia, fui formado pelo Instituto Superior Politécnico de Tete, neste exacto momento estou muito grato pelos seus tutoriais relativos a Hardware e software, e agradecia e espero de mais Explicações a respeito de I.T. Os seus videos me ajudam bastante no meu treinamento. bom trabalho.

[@RichardWheeler-SE-BA-PM]

If you ever redo this video or ever make another like it, please zoom in a little more, provide more light, and point out what you're going to unscrew before covering it with your hands. There was one especially irritating point where the tech did something to the bottom of the laptop, out of view, while it was turned sideways. Plus, the tech might practice opening the case once before doing it for the video. Suggestions for other viewers: Avoid damaging the case by using a credit card or paint scraper instead of the point of a knife. You can always file down a corner so you can wedge it into tight spots. Instead of mixing the screws together, arrange them on a piece of cloth so, when reassembling the laptop, you know which ones go where.

[@joseluisportacio3895]

In order to do the second movement (releasing the back cover), you should unscrew the small screw located up in the center.

[@ferrarilu1]

Muito bom, consegui arrumar meu note HP com seus videos. Parabéns.

[@michellenaranjo4340]

I agree with the fact that there should be more zooming in to see what is done. I would really appreciate subtitles saying what the parts are and what you're doing, as well as any advice on where to be more careful

[@RichardWheeler-SE-BA-PM]

Another hint: Using a small piece of tape, place each screw on a flat area of the case next to where the screw came from. I had the case apart four years ago. Now, replacing the fan, it took me a while to figure out why I kept finding pieces of tape all over. LOL

[@PearComputingDevices]

Very helpful, unfortunately typical HP construction. At least you can access the fan and CPU without all this work. But it's kind of obvious of why you don't see them in a lot of businesses these days too. Techs like easy access and robust designs. Obviously the Probook at times misses these marks. The upside to this is that's why they're also cheap 2nd hand. Nobody wants to put the labor in to fixing it.

[@wikuwianjana6885]

Big thanks, this realy helpfull🙏😊

[@graylingtimes]

Would you be able to do a video on how to replace the speakers on this model please

[@NotebookCenterTV]

Sorry, however, we don't have this laptop now.

[@AshuKemla]

They have started distorting in mine. Same in your case?

[@thasirawakkumbura7127]

please tell me which type of screw drivers are needed

[@NotebookCenterTV]

Ususally it is PH1 and PH2

[@NikolaTesla7639]

You have a doctorate in engineering and not just an engineer

[@Day1Dignified]

My OS shows a red x across my speaker button and laptop has no sound after cleaning and putting pack together. Any ideas what I did or didnt do?

[@NotebookCenterTV]

You should check all connected cables. Apparently you didn't connect anythig back bcorreclty.

[@SuperSvilar]

In the end what is that paste?

[@vladislavpalenik329]

Toothpaste

[@jomatabe]

Thermic paste

[@bardos]

thermal paste

[@technicaldept.5050]

terrible design-this guy is battling hard to strip this

[@Hmx_mrx]

Without music theres no fun. 😕

[@yung4real77]

shut up the musics retarded