NP300 CRG Throttle Body Pipe Upgrade

[@jpcaptured799]

Check out the latest engine mod that we installed into the Nav. It's almost time for an engine tune and a before and after video🙌 enjoy the video legends!

[@Bigorse91]

Right after he said "Give it a good wiggle and that actually comes off pretty easy" I knew this was crap. Did my hot pipe earlier and made a new language with cuss words from these clips so I was prepared for this to be a real pain. I wasn't wrong. Missing skin off my knuckles and started raining. Got there in the end in the rainy and all. Was so glad no codes were thrown or anything blew off. 😅

[@outbackAus260]

Tell me about it, my arm looked like I did 6 rounds with a feral cat from the clips on the airbox from my hot pipe install lol

[@danleggett5280]

Every time i move mine those f@&king clips pop back in.

[@takch8605]

Thanks for the video. This was the hardest s.o.b. to install and I dropped the mounting screw into the Bermuda Triangle and never to be found - just cable tied the sucker down for a bit until I get around the wreckers! Got the Intercooler kit in the garage and thinking probably easier to have done it all at once. Oh well!

[@TheTurboYoda]

This video helped me in a way you wouldnt have expected. Instead of the sensor coming out of the pipe i found out one of my mates had just unplugged it. Absolute dog act, atleast i watched this before taking it to the stealership.

[@nathanholt7287]

he is no mate

[@watto_2445]

Great video mate, perfectly clear instructions! Please keep them coming! Huge inspo to tackle jobs like this on my np300 despite having little experience working on cars!

[@jpcaptured799]

That's what I'm here for 🤠 thanks for the love brother & good luck with your build 🍻

[@AdOYOO]

Great informative video guys ! That Nav is turning out to be a proper beast!

[@tsumme01]

Thanks JP wouldn't have been able to do it without you. But you made it look so easy😭

[@Shorty4655]

Just to add to this you don't have to remove the clip on the air temp sensor plug. Just push it down and remove the plug, less chance of losing it. I had extreme difficultly removing the throttle body even after unseating the retaining clip. I had to use a pry bar from the top of the engine bay and pry back to the top of the throttle body pipe to break the seal.

[@tonyprior80]

Another awesome video, I have ordered my intercooler and hot and cold pipes for my 2022 Warrior after watching your clip on the hot pipe install, I am going to have CRG do the install. Thanks for the great content and keep up the good work mate, looking forward to the next one

[@jpcaptured799]

You went the whole package like me! You won't regret doing it Tony, it makes a massive difference. The CRG crew are awesome, they will take good care of your rig. Thanks for commenting 🍻

[@paulsordello]

Got one of these a while ago but have not installed it yet. Thanks so much for the video, will have a crack at it very soon.

[@jpcaptured799]

Perfect timing then ay! That's awesome mate 🤙

[@Dv8rAssassin]

Lovin these vids I’ve got a np300 and am doing a lot of similar mods so I’ve been getting pointers for everything.

[@lockie_builds]

Just a bunch of handsome rosters doing car things!!

[@jpcaptured799]

Lachies story time 🤙

[@kurtismccarthy7513]

Awesome video mate!

[@keithcerff-wanderingoverla5448]

Thanks for ur helpful videos mate… legend. But mate… that 13mm bolt did my head in . Lol

[@ianpenrose109]

Awesome video and information keep it going 😎👍

[@jpcaptured799]

Thanks mate 😊

[@nightrider1700]

Hey mate, with those 2 pin connectors, like the intake sensor one, you dont have to remove the metal clip. You can push it in towards the plug itself

[@jpcaptured799]

Cheers mate, I found that out after I had filmed it 🤣 probably saves you from loosing them too 👌

[@nightrider1700]

@@jpcaptured799 yeeeep, saves them shooting off into space hahaha

[@mitchelldepietro9485]

Have a look at these legends

[@jpcaptured799]

Mitchy boy 🤜🤛

[@Kirk612]

Doing mine right now but I'm also doing silicone hose replacement (plazman) and using Platinum pipes, they seem to have double o rings for each connection.

[@Lifeunedited86]

Hey guys can you do a video on everything you show know about the np300 I just got one a couple months back and I see you know your stuff and I would love like a check list kind of video so I can do a walk around and compare to yours to see if mine is still working in perfect order reason for want this is because my np300 has a few kms on it and is a 2015 model cheers boys I love your channel can't wait to come wheeling with you

[@emanuelmallia9962]

Hi Jp Have you done a video on CRG intercooler replacement

[@TahjmaRahj]

Hey mate great video! Do you think it’s worth doing the front mount intercooler if your not getting a tune?

[@keagangoldhawk6686]

I just bought a 2016 np300 and im really 3njoyingyour videos they are brilliant. What would you recommend be the first mod or where would you start ?

[@SouthernHoax]

great video thanks mate - definitely subscribed. I noticed you didn't change the intercooler pipes as well. Not necessary?

[@michaelpayne-bailey8274]

Have you done a body lift would be interested in that

[@josh4u319]

I wonder if this is available for the Asian spec NP300 with the YD25 engines.

[@darcy6951]

had that sensor blow out while i was down at double island, still have it zip tied onto the pipe while im waiting for my new one. after a week of driving it with it zip tied up it’s thrown a red check engine light.

[@jodybray9558]

Do you have a video on the bottom intercooler pipe?

[@jamesblack3596]

Are you going to do a video on blanking the exhaust to egr cooler pipe?

[@georgedamouras3454]

Hi mate have you fitted or considering fitting a oil catch can kit

[@theblade4x464]

I told you to do this 🤣👍👍

[@jpcaptured799]

Thanks brother 🍻

[@scotttzavaras8373]

Hey JP. Love all your videos. You sure are great at explaining how to do things. My question is that I have got a 2021 pro4x from brand new and now 12 months old with 55k on it, is there much difference between your rig and mine? I have had installed a 2" efs lift kit and it's a really good ride! Saving for more mod down the track.

[@mikemorgan4670]

Good one Buddy. I have a question.......

[@jpcaptured799]

What's the question Mike ?

[@mikemorgan4670]

@@jpcaptured799 It was a play on your Buddies closing statement.....when are more videos coming out? Love your content and upbeat presentation.

[@LIBERTADPORTIERRA]

Hi, donde puedo comprar esas piezas metálicas? para la nissan np300.... thanks

[@_Alfa.Bravo_]

Hi. Do you have the 2.3 or the 2.5 liter engine?

[@antongeraldoy8031]

Don't you need to clean the air temp sensor with brake cleaner?

[@jpcaptured799]

You could clean the sensor with sensor cleaner if you wanted too 👍

[@jonathanjaafar9131]

What is the engine specs of this Navara?

[@gregoryadams5320]

Whats the cost of that pipe i'm from Tobago

[@nandowzmhlongo]

Why doesn't CRG come with the snap ring?

[@jpcaptured799]

The OEM one is perfectly fine to re use.

[@joboalba7015]

Wher can i Purchase all this CRG pipes..price range too..?

[@keithcerff-wanderingoverla5448]

Once again great instructions to follow. 🤙 Hook ur brothers and sisters with discount codes. Thanks 🍻

[@jpcaptured799]

Whenever I can I do ☺️ cheers mate 🍻

[@jamesradford3295]

How long roughly did this take?

[@jpcaptured799]

Roughly 2 hours 👍

[@hayden3401]

Do you know if it voids warranty?

[@Kirk612]

Warranty covers manufacturing defects of the vehicle on OEM parts, warranty can't be void for any failure of a Nissan OEM part unless the aftermarket part caused the failure, search nissan warranty terms for the word void, you won't find it, Australian consumer law has it covered.

[@gracianomanuel2267]

Hallo