Рет қаралды 10,426
Here I mow my grass trails with my 2016 Bobcat Toolcat 5600. I use a MTL XC7 60" cut (68" overall width) hydraulic brush mower that has a 300lb flywheel and three 1ft long swing axes to take out some serious trees (6+ inches). I use this cutter to maintain several miles of trails as well as mow a few acres of field. The Toolcat is essentially a skid steer powertrain/hydraulic pump/quick attach plate setup so it can use all the same attachments. This cutter weighs about 1500lbs which is the rated operating capacity (ROC) for the Toolcat (meaning 50% of tipping weight, it can lift about 3k lbs).
I made the arms for the wheels (std brush hog wheels, purchased here: amzn.to/3khy5vF) so I can float the boom for easier mowing, I can pop them off with 4 bolts if I want to get into heavier stuff. I used 2x3x3/16 rectangular and 1.5x0.25 DOM round tubing.
Nater Tater Merch Store: www.natertaterchannel.com/shop/ Stickers, magnets, shirts, bags and more!
Donate to support this channel: www.paypal.com/donate/?hosted...
My Filming and other Gear: www.amazon.com/shop/natertater
The Nater Tater Channel ( / natertater ) covers any topics related to my 47 acre property. Building things, driving things, smarthome, wifi, outdoor activities etc. Follow me to see my many projects!
Subscribe here: tinyurl.com/y5ct8pkl
#Toolcat #MTL #brushcutter #Bobcat