NT Carburetor Cable Installation

How to install throttle cable on Round slide carburetors. Same procedure works for the following Carbs:
NT, Speed, Speed V2 and CNS Carbs.
All carbs can be found at:
www.pistonbikes...
Music by MK2

[@JustinDowDIYcentralhighway]

Excellent Video. Watched 8 other videos and your the only one that showed the Throttle cable to Carburetor install portion. Thank you very helpful

[@jesse1136]

Dude no kidding. How ridiculous is it that there are 3,387,3728,783 kart and mini bike channels but NOT ONE could I find with instructions for the cable. Thank yoj.

[@moondawg3693]

Thanks very much. Watched this once and did my bike, the mark of a perfect instructional video. Well done !!!

[@user-fk2mp5xh4s]

8 years later, Thank You.

[@jmoney6825]

You a legend seven years later

[@sleepyrasta14820]

Thank you so much. Straight to the point no waffling on i need to do this to my bike tomorrow I'll be rewatching it then. I've subscribed.

[@KuntryFried_ATV]

Thank you thank you. Got my son's pit bike up and running 5 minutes after watching this. You got a like and subscribe from me.

[@nate6692]

Thanks. I'll add for anyone who missed it - the video actually shows it correctly, but I missed it the first time in the glare on the screen outdoors. He says line up the slot with the idle screw, but the locator pin actually OPPOSITE the idle screw. Scared my kid half to death when I fired up his handmedown 110cc ATV the first time and the throttle was stuck WAO. Thankfully I had it up on blocks just in case.

[@alexsgarage01]

same i was just shocked and stood there like an idiot while my bike was about to grenade itself

[@LNRRidez]

My son just ate shit on his go kart today because I put it together wrong lol

[@FrancescoSorrentino-ws7mx]

Non sapevo come si montava il cavo grazie per questo video

[@KenRupin]

Quick and easy! Thank you so much!

[@ItsThe675]

Trying to get that damn throttle cable attached while holding back the spring, especially since it's a new spring going in, is such a pain in the ass. Without this video I would have given up🤦

[@elsonab4283]

Thank you so much. This was really helpful to me. I'm new to this hobby.

[@daltonhunter5769]

Super helpful vid

[@hydejekkyll1367]

I got to save all the background music I've ever heard on these kind of videos this is my favorite one is the only one that don't bug me.

[@Jsanch23]

Thank you for making this video, I just fixed my sons pit bike

[@alienlatino2945]

LOL I came here because I messed with that thing and then couldn't put it back together, had no clue how to do it, now I know how, thanks!!

[@prashantjha3987]

Very very thank you today this video is very helpful full for me, I reached my place with the help of last minute of this video Thanks again

[@bobolson5086]

Right on bro thanks for the help man you gave me the confidence I needed to do that dude I really appreciate that good video

[@watsonodin5110]

Instablaster

[@buzzardsbass1137]

I've watched probably all of these NT carb installs and adjustment videos but only recall ONE that mentioned the JET where the person found the jet loose, not even started~!

[@853rudedogs2]

Your a bloody legend mate

[@metal2951]

thanks

[@alvarezguitar87]

Thank you!! Love the video

[@jamaicangardener8523]

Great video. Please make more of these maintenance videos. I have a 78 Honda c50. This was helpful

[@VivekYadav-gc8pu]

The

[@jimmywhitlow7174]

@@VivekYadav-gc8pu The? Lol

[@gregdean2012]

Thanks mate back on the track.

[@kvppvk]

Don’t you think it would be more useful for viewers to hear your voice instead of that background noise - after all whatever language you speak someone would benefit.

[@anonymous2065]

When I put my new cable in, the slider doesn't go all the way down to bottom of carb, and it revs high when I start it. Is it the wrong cable, or could it be something else. I've taken carb off 5 times now and it still has same issues, Please help me somebody

[@stillben]

i am having similar problem. my cable is too tight with the new needle in place. barely turns on the throttle grip.

[@anonymous2065]

@@stillben Yh, it was crazy, the cable i replaced was the exact same size as the one i took off but it was too short to release the carb slider when fitted, so i got a dremmel and took off 10mm from the cable protector at the carb end and now works fine.

[@stillben]

@@anonymous2065 That's an idea. Yrah crazy thought it would all be standard. I found the cable guide that bends around was longer on my replacement carb, and was taking too much of the slack, so I am swapping that for my original honda one. My replacement spring seemed too long too so will try original though tired spring. If those don't work, will do your dremel trick. Good shout!

[@Str4ng3F0lk]

Mine is new, I'm assembling it for the first time and the round slide is stuck. How do I get it out?

[@johndehoney636]

Great video on this carburetor I fix my problem Thank you

[@AliAbdullah-oi3wc]

Heck yea! Thank you!

[@gromitbrev1031]

Thank you.

[@abdoulayesanogo5532]

Moi c'est Sanogo Abdoulaye je suis mécanismes de moto An côté voir et je vous félicite pour l'amour de votre métier

[@softballrocks10100]

added a new carb on 1990 xr90 new carb had the little clip but no pacman clip......wont start now or if it does it starts wide open...slides in properly....help driving me crazy

[@NiteRyde]

Needing help, I did everything in the video but the Throttle never slings back, it just says

[@reytubetv6177]

salamat paps ito talaga hanap ko. malaking tulong to salamat ulit

[@artguess9893]

Good on ya bro, great vid!

[@elboricualoko123]

I can’t seem to find the length of cable I need withthe right ends. I have a Coleman kt196 go kart I just installed a new carb with this pin setup. The old carb allowed a cable with no barrel end. Is there a way to run a cable through this carb with pin setup with no end on the cable?

[@robertd6273]

No, this carb requires the cable with the end on it. We sell a cable kit to make a custom cable any length. www.pistonbikes.com/product-p/epfc14in.htm

[@deepakparmar2912]

Thanks! this video is very helpful full for me, Please whole video! of Suzuki Assess125, 2013 Model How far does that plastic housing for the needle and spring, slide into the carburetor??

[@hypertahir]

Thanks 🙏

[@fernierodriguez3838]

What the cap that screws onto carburetor i seen yours has like a nut you twist mine dosent

[@edwardkulczynski5588]

Took my old carb. Apart can’t get the old one out need some ideas

[@hakosama]

This helps a lot. Thanks much.

[@albertbaltes6140]

Thanks so much - would have had it in upside down if it wasn’t for this vid!

[@anthonysousa7899]

Can I just buy or find a pacman clip? It's the only thing I'm missing.

[@Ealps]

Perfect video man

[@rabinapierrevincent3002]

It helps me a lot boss. Thank you

[@keithlutz2063]

You covered up the part I waited for the whole video! Haha. How far does that plastic housing for the needle slide into the carburetor??

[@tyronehunt5836]

Keith Lutz all the way

[@briangoulet9349]

“”8”6 y you hgand up l who’d

[@briangoulet9349]

Y@@tyronehunt5836 yyyy

[@owenmullahy3558]

Thanks a lot this video was perfect for what I needed to fix, thanks

[@amitkumarkumar2752]

L

[@hamzabennai7059]

Merci

[@markh.2899]

Thanks! This is exactly what I was looking for !

[@bemotivate3149]

same

[@ArshadAli-ib8cr]

thank you so much sir aap ki wajah se Meri bahut jyada madat Hogi thank you thank you thank you so much

[@aristotlecarmonaofficial]

Yamaha ytx how to install starter cable step by step

[@FranciscoRamirez-qj9pm]

Quiero saber en forma va la aguja en que posición tiene una ranura larga y otra corta como se coloca

[@muhammadsagar6403]

Mere pass Honda CD70 1986 model point sistem Gaari he agar point sistem ko cdi me change karwaon to koi problem Gaari Ni Kare gi or kharcha kitna aaye ga

[@purplepimpdaddy2246]

Where could I find a Pacman clip at?

[@jiyakhancomedymovie7310]

Very very good

[@titusballsportsministry9680]

should I really take the carburetor off my bike to put the cable?

[@bluepen215]

Good i will try

[@bryancinches8967]

thanks for this helped a lot

[@mickhudspeth1756]

Thanks - really helpful

[@nahuelarregin882]

Mi bicimoto no tiene fuerza que puede ser

[@lonpascual184]

thanyou very helpful

[@billcurtis7472]

I put the new one in but not the new spring ji still not getting any throttle

[@angelicamoreno80]

Hero

[@steelheadlbs34]

Good video. 😂 music had me ready to go!!

[@sachinchari2829]

Thanks bro

[@ftw65911]

Awesome video..thanks man

[@arvindpanday9725]

Good

[@jgcomputers2202]

i can not find the cable set anywhere, any ideas

[@rajap5148]

Super

[@kiranthakor9897]

Video banane ke liye thanks

[@simanchalswain07]

OK thank you

[@kilowatttheorignal]

Soo what if the parts inside at firsy are stuck

[@samdibsyd6183]

Why is the spring important please help me

[@robertd6273]

Sam Dib - the spring is important so the throttle will snap back. Without it the carb would get stuck in the open position

[@redneckwithajeep5001]

Robert Whetzel funny enough I need a new spring for mine. It barely moves the throttle at all

[@groovyshoos5200]

Thanks man

[@chetjuuh5189]

Tnx bro ❤❤

[@IsrarKhan-te6ce]

Very nice 👍👍 👍

[@nicholesorallo8689]

Anung brand ng carburador yan boss

[@timothyaustin345]

We're can I get on I have a 110cc and need a new cable and can't find it we're can get the nt carb throttle cable your showing gonna the video

[@robertd6273]

PistonBikes.com. Look for throttle cable

[@umarmehar8671]

ya kon se bike ka carburetor ha

[@OLMECTHUGS]

Thanks for the video ,living where I do I don't have any mechanic near .I did everything like your video shows but the only problem I have is that I bought a new carb and can't get the old carb top off it keeps spinning ,Someone said that it was treaded ,I never changed a part that is treaded can you make a video on that or where you think I can find more info?

[@DrPrymeTyme]

OLMEC THUGS there might be a little set screw in the side you have to loosen

[@jimmywhitlow7174]

Threaded, simply means you screw the cap off. And as previously stated, it may have a set scew that you have to loosen.

[@OLMECTHUGS]

Jimmy Whitlow thank you the bike is gone , I sold it

[@vaughn1691]

I can’t take mine out I think it’s stuck or something idk

[@robertd6273]

Slide might be dragging on the guide pin. Or might have been installed with the pin not in the groove

[@kiranthakor9897]

Thanks bhai video

[@peteryates9153]

Awesome Cheers buddy 👍

[@rolex6091]

Ok so I followed the instructions exactly problem is when choke is on full and accelorate it stalls..and when I reduce the choke my quad revs it’s nuts off and tries to fly off, any ideas

[@dustysafrit6094]

ALEX R having the same problem with my sons go-cart, hope you got it fixed bc I can’t get this thing running smooth to save my life!!!

[@nate6692]

Hopefully you're not still stuck, but for anyone finding this in the future - once you get the slide in correctly, head to the videos on tuning the mixture/idle setting. That was frustrating keeping it running long enough to set the mixture and idle - I had to go a bit overrich first.

[@joecharron3984]

Please send this video to bike berry.comp because their coustermer service has no idea

[@shankarjadhavshrikant6633]

Mare activa gadi chalet fact speed cam jade ho raha hai

[@AbdulHamid-gs8vx]

super👌👌👌💚💛💜

[@manikantagoud2658]

Manikanta Goud

[@umarhayat6591]

Nice channel,,m mkinik umar ch

[@s.b.d.kkohliboy7708]

Hi

[@khart02]

Gas to the carburetors is not getting gas,And won't start, how come??

[@Pistonbikes]

Check that gas is coming out of fuel valve, valve has a pick up screen in it that can clog. If fuel is getting to the carb, check that main jet is not clogged. Also check that the float levers are operating and not cutting off the fuel.

[@tonysilva8771]

XxGamergirlxX ! Full o

[@MuhammadHassan-wd9xm]

Ab ki br video ko camera ko pore samnay rakh kr bana na

[@shyampc4435]

shyam pc

[@nabilafaisal4987]

karbu fit x

[@7awrence]

Thanks. (painful music though)

[@robertd6273]

Sorry about the music, it was the only royalty free I could find at the time. I’ll look into changing it.

[@7awrence]

Haha. Great video though.

[@dharmendrabatham4851]

कीमत तार की रेस के

[@alfonsomacias6745]

Can anyone pls give me a carburetor cap mine broke

[@cloroxbleach4396]

Alfonso Macias i can

[@shofiqmia3777]

S

[@cucolanda9010]

…

[@Naruto-iw5qz]

Music kill the video but thanks

[@chrisl6816]

I will make a how to video on adjusting your device's volume. Then you can turn it down and not be bothered.

[@raviverma380]

Hl