Good people like you are are why I turn to KZbin. This video was beautifully clear and very helpful. Thank you.
@BobHawke-z7vАй бұрын
Possibly the best review I have seen on KZbin for any product. Clear and concise. I can now buy with confidence thank you!
@Virginiamarygreene10 ай бұрын
What a brilliantly clear demonstration of "George".. Thanks
@Dannypalarchio Жыл бұрын
Ive got a george and this is how I deep clean car carpets. Vacuum first, dilute carpet soap with water in a sprayer. Spray solution onto carpets. Brush the fibers with a light stiff brush or drill brush. Then run only hot water no soap in your george or other extractor and extract the carpet. This will at least rinse out the carpet solution from the fibers, leaving no soap residue which can attract more dirt. Do many dry passes no spraying just vacuum to take out as much residual water left in the fibers. Enjoy clean carpets👍
@Sam-kw9wd Жыл бұрын
Can you run hot water on george or just warm?
@doonhamer74 Жыл бұрын
The instructions say that you should only use cold water....
@RJA_World Жыл бұрын
@@doonhamer74Trouble is, cold water doesn't get the dirt, stains and germs out the carpet. 60-70 degrees is best and I usually use 60 degrees with George in order to properly clean and sanitise the carpet/upholstery and I've never had a problem with it.
@MrDoubleD93 Жыл бұрын
@@RJA_World how long do you use george with hot water? How long it lasted?
@RJA_World Жыл бұрын
@@MrDoubleD93 I don't use it too often but when I do it's big cleans, full flats ect. It's lasted me nearly 2 years with no issues. Despite Numatic's recommendation of only using 20 degrees maximum, that won't get the dirt out. It has to be hot.
@shaunandrews119713 күн бұрын
Thanks for the demonstration, it didn't mention in the instruction if you could use both the pump and suction functions at the same time so I was unsure untill I saw your video, thank you. 👍
@lulucukipofa7411Ай бұрын
Thank you for this video, was so much better than the instructions given with George.
@CarBoreBoy Жыл бұрын
Nice to see this, thanks. That's how i was going to do it, per the instructions, but it's great to see it happen in reality too.
@xavierayayaell5463 ай бұрын
You will have much better dirt extraction by spraying your cleaning solution on the upholstery and letting it dwell for a minute, before then vacuuming out. Holding the trigger whilst at the same time vacuuming just means you are using 20x more cleaning fluid than required (great for Numatic's profits, on top of the fact they are selling you 98% water as "cleaning solution"). You can also benefit by spraying a couple of rounds of clean water to help dilute the amount of cleaning solutions still left in the upholstery whilst continuing to extract. If you are serious about cleaning cars you would benefit from looking at chemicals from the likes of Koch Chemie which come much more concentrated and are extremely friendly to all car interior surfaces. Also, you should have cleaned your foot pedals to complete the job. Great demonstration of what is achievable by following the instructions though, very satisfying seeing all the dirty water at the end.
@ibaisaic3 ай бұрын
I’m not contributing to Numatic’s profits as I don’t use their solution and no, I am not serious about cleaning cars apart from the ones owned by family members.
@niallwijetunge1711 Жыл бұрын
I have watched you all my life my first channel ever to watch
@aramis295 Жыл бұрын
@ 16:00 Rug Doctor rental: utility tool for upholstery, stairs, and car interiors(not the exact same as the original tool, with a longer hose, nor a separate brass solution tube connector, and no mesh storage bag, either.
@usainengland Жыл бұрын
I have such problems with the hose connection. Keeps coming apart. Should the green ring part of the connection be stable? Mine seems to pop out. I can’t figure out how it stays in place. At least with help of your video we managed to do most of the flat. Thanks so much! The instructions are pretty useless.
@webventures6 ай бұрын
By George, I think I need to buy George! I was thinking Rug Doctor Blue after watching another of your videos but gosh by golly that may be folly. Excellent presentation!
@gamingheston2 Жыл бұрын
George is my favorite numatic vaccum
@Nurpie Жыл бұрын
I have a Rainbow Systems but I think it is made for the hands of big people so sweat a lot using it. This looks easier. Can you also wet mop floor with this?
@ibaisaic Жыл бұрын
Yes, this model comes with an attachment for washing floors.
@colinsace111 ай бұрын
I had a vax 6131T for years it recently blew up after 12 years but I want to know if this is easier than a vax as it’s like an actual work out 😩
@LeeMcCoy-bh6kv Жыл бұрын
Hi roger I have a numatic George it is great for valeting my customers cars but when I spray the solution onto the carpet it only sprays out one side of the carpet jet
@ibaisaic Жыл бұрын
I suggest that the jet may be partially blocked. Try clearing it with a pin.
@gregbouchard414 Жыл бұрын
Keep up there good work on here mate am big fan of u do a rally good job on here
@TheMagicLemur8 ай бұрын
Very useful - knew it had this functionality but didn't have a scooby how to use it... and now do. 😊
@jonyjonsy Жыл бұрын
Fab video! Will the turbo pet brush fit onto the George model? I intend on presoaking it and using the pet brush to agitate the dirt before sucking it up
@ibaisaic Жыл бұрын
You can’t use the turbo brush on wet or damp carpets, it is intended for dry use only. It would fit the George but it probably won’t last long if you intend to use it as you described.
@jonyjonsy Жыл бұрын
@@ibaisaic okay thanks for letting me know! I shall only use it for dry uses 😊
@Mackeson3 Жыл бұрын
Great tool but Numatic really dropped a ball when they did the recent "facelift" on George. While they were at it they should have replaced that next to useless carpet fishtail thingy with some sort of rotary brush like the Vax Spinscrub. I actually adapted a Vax Spinscrub head ( N.L.A. sadly!) to fit onto my Geroge and it's way better. Cleans the carpet better and sucks up the dirty water better too.
@Keane-to-clean Жыл бұрын
Are these really worth it gonna prob buy one soon between this and the vax cant decided and i see wd6 also but looks bad tbh
@webscrapingseniors Жыл бұрын
Well explained. Thank you very much
@OldSkoolPGFan Жыл бұрын
Have you ever done a suction test on george? I dont think i've ever seen one done...
@OldSkoolPGFan Жыл бұрын
Any reason you havn't?
@RC-sn5oi5 ай бұрын
Hi after you went over to extract the cleaning detergent from the seats / car interior how wet and how long did they take to dry ?
@SM-ur5oq27 күн бұрын
Hello 👋🏽 can I attach a larger nozzle for bigger surfaces such as carpets and rugs?
@ibaisaic27 күн бұрын
Yes, the George comes with many other attachments. Here is my video on the current model showing all the tools included. kzbin.info/www/bejne/emKWg6GMepqlps0si=9t_pCLqKqk_pnBzJ
@SM-ur5oq27 күн бұрын
@ I think my extended wand got lost I only have the small nozzle. Any idea where I can buy the extended wand and nozzle from?
@ibaisaic26 күн бұрын
Ebay and other online stores. Just Google the parts you need and you’ll find a list of websites that sell them.
@SM-ur5oq22 күн бұрын
@ Tried my best but can’t find any 😭
@Super7Jupiter Жыл бұрын
Just bought a George, but the hose attachment to the nose keeps coming out, the instructions are just pictures, is there meant to be a piece that threads on the outside of the nose part? This one slots in but isn't easy to do....my carpets are still quite damp, after watching your video which is brillliant and informative, I'll go over them again tomorrow to dry them some more.
@ibaisaic Жыл бұрын
The hose fitting is a bayonet type. The threads on the outside allow you to fit a regular screw in Numatic hose. I don’t recommend the George for carpet cleaning as it’s not very effective, but it’s great when using the small washing head.
@KristinKing-n3s2 ай бұрын
What was that noise when u dry cleaned car under seat ?
@jamiegamer7157 Жыл бұрын
Hi, I have a question. I understand “Henry Wash” is a cheaper version of the George? But can I use the Henry wash for dry cleaning? If I have my own attachments from my Henry HVX200. The filter, the bags and pipe? Or is the Henry Wash strictly for wet cleaning only? Because if a Henry wash is just a George without the dry tools then I may as well save £50 and just get the Henry wash
@ibaisaic Жыл бұрын
The Henry tools will fit a Henry wash as will the dust bag, though you can buy bigger bags to fir the Henry Wash. As long as the filter fits Henry Wash then you can convert it for dry cleaning. At the most, you may have to buy a George dry filter if the Henry one doesn’t fit.
@jamiegamer7157 Жыл бұрын
@@ibaisaic thanks so much 🙏🏼 just saved me £50 and a bag full of tools I already have.
@Only_Ameen04 Жыл бұрын
I want to know if there's difference between George and Henry
@Lindastyle Жыл бұрын
George is also for wet cleaning, and Henry is only for vacuuming
@josephmay4937 Жыл бұрын
I love the red interior of your beautiful car Roger what kind of car is it look fancy
@davecoleman47058 ай бұрын
Great full review...thank you.
@stephansteyn5351 Жыл бұрын
how is the dry vacuum bag emptied?
@ibaisaic Жыл бұрын
It is not emptied, it is supposed to be replaced with a new bag when full.
@jfsx100 Жыл бұрын
Hi Could you do a car cleaning video with Thomas Aqua plus pet and family vacuum? Thank you so much
@sabry8484 Жыл бұрын
How's the quality? Does it feel sturdy all and all?
@ibaisaic Жыл бұрын
It is sturdy and seems well made.
@malachydixon9187 Жыл бұрын
They're sturdy i dropped one down the stairs only got a scratch
@匿名的-1 Жыл бұрын
Excellent machine! Wish I had one.
@rhys4413 Жыл бұрын
just build ur own
@davidb60697 ай бұрын
It's 35ml per every litre of cleaning solution 😊
@veet95569 ай бұрын
Very clear instructions thank you 🤩
@cameliasaltan34994 ай бұрын
Thank you😊
@shallremainnameless1998 Жыл бұрын
Did you manage to extract enough water from the seats? They seemed to be taking up water like sponges, which effectively I suppose they are - foam seat pads and cloth cover
@221b-Maker-Street Жыл бұрын
You won't get a better domestic extractor than the George/Charles. They really are excellent, so I imagine Roger went over the seats a few times until he was confident he couldn't extract any more water from them.
@mikeybradburn5730 Жыл бұрын
Love it 😍
@ConnallyPlayz2 Жыл бұрын
Do You Know There's A Even Newer George On MyHenry And Now The New Georges Have The Switch's On The Front And Also In The Charles.
@ibaisaic Жыл бұрын
Yes, I mentioned them in my latest Numatic video.
@ConnallyPlayz2 Жыл бұрын
@@ibaisaic YOOO You Replied To Me?!
@ConnallyPlayz2 Жыл бұрын
@@ibaisaic The Dirk Muller Henry 180 Plus
@lookmanseedat Жыл бұрын
Does your machine get really hot?, i got a brand new unit couple days old and it turned off on me first day of use, came on again after it cooled down stayed on for like 5 minutes ish turned off again :( i've noticied theres like some foam in the air intakes guess thats for dust could that be a reason why it overheating?
@ibaisaic Жыл бұрын
No mine does not get really hot. If a vacuum cleaner overheats and cuts out it is normally due to a restriction in the airflow causing the motor to get hot and activating the thermal cut out.
@dlarge6502 Жыл бұрын
Mine does that as well, did it out of the box. I just don't use it for dusting, I hoover, then while it cools I dust. When it cuts out it can take an age to cool and reset.
@lookmanseedat Жыл бұрын
@@dlarge6502 i ended up getting a replacement unit
@Egynox Жыл бұрын
The new George has its switches at the front instead of the back
@vk1073 Жыл бұрын
How long does it take the seats to dry ???
@Sam-kw9wd Жыл бұрын
Depends how you treat the fabric seats/carpet but it normally takes a couple of hours without proper ventilation plus you have to consider the weather too.
@evilutionltd Жыл бұрын
If they added an agitator into the head, it would be the ultimate cleaner.
@Aspirateur1975 Жыл бұрын
Thanks for the video ! 😃
@audibell Жыл бұрын
What car do you have
@ibaisaic Жыл бұрын
I don’t have one but I am chauffeured around in the back of a 7 seater Skoda Karoq.
@audibell Жыл бұрын
Very nice 😊
@DARRENJOHNHARRIS1 Жыл бұрын
No rotating buses to agitate the carpet so you are just spaying water on and sucking it out
@robdavis5711 Жыл бұрын
Wait… what? Your car has ‘hardly ever been vacuumed’?!? The car is one of my favourite things to vacuum: lots of nooks and crannies, ample opportunity to use a dusting brush on the dash and console, heavy duty muck and grit to scrub out of the boot! It’s a proper vacuum cleaner workout!
Really good job, the colour of the extracted water says it all. I follow The Detail Geek, a Canadian car valeting specialist for weekly pressure cleaning, vacuuming and extraction action. His preferred method for extraction is to use a pump sprayer to apply chemical manually then use a cordless drill and brush to agitate quite thoroughly, then he uses the extractor with just water in it - no shampoo - to ‘rinse’ the carpets and seats, leaving as little chemical residue behind to become sticky and attract resoiling. He used to use a Bissell spot cleaner but recently upgraded to quite a substantial commercial extractor. Not suggesting our beloved Ibaisiac is doing it wrong, but I’ve used a Vax on carpets before and in my experience the resoiling means you’re stuck shampooing the carpet more regularly… I’ve seen other carpet cleaning videos and rug cleaners too, who apply shampoo, agitate with a single disc machine or counter-rotating brush machine, then just use water to rinse and an extractor to just remove water.
@huskyvacs Жыл бұрын
@@robdavis5711 Professional cleaning companies will use guaranteed hygienic methods and not residential shampooers. For your average Joe, as long as you don't live like a hippopotamus, shampooing with a standard cleaner will do fine. If you just picked up a used car though or you have a filthy nasty car, then I would rather use the professional method. Also doing the pre-app with a pump sprayer and manual agitation and only using the shampooer for hot water extraction will save your shampooer tubing from rotting out anyway (the chemicals in the shampoo left sitting in the lines will chew up the rubber). Tubing can be replaced anyway, but you know, it's a couple hours of work to replace all those lines so rather not make it a frequent job.
@ItsDisneyTreasure Жыл бұрын
realistic!
@TB2YouTube Жыл бұрын
Do you drive car?????
@anthonygreen14684 ай бұрын
Mark drive the car
@spotlesscarpetupholsterycl460 Жыл бұрын
Ok for the diy amateur valet car enthusiasts But these are poor results compared to a pro machine..
@chrisblack5359 Жыл бұрын
So what machine do the Pros use?
@peter7582 Жыл бұрын
Nothing wrong with George. He just did it wrong. You're supposed to apply cleaner using a pump sprayer, agitate with drill brush, then extract with the vacuum filled with hot water only. Still did an okay job despite this.
@David-wl1tt11 ай бұрын
Panda seats are probably the worse material you can ever find
@ibaisaic11 ай бұрын
Probably a better material than cheap toilet paper that you put your finger through when wiping your bum. My 80 year old mother seems happy with her Panda.