How to make 2000mm RC motor glider DIY

[@pabloricardodetarragon2649]

I cringe when I see videos of poor scratchbuilt RC planes. That happens too often. But watching your videos is a pleasure for the eyes and a deep satisfaction as admiring the engineering, the care and the precision. Many thanks for your so instructive videos.

[@ZapTeam]

The poorly built ones are to show beginners that it doesn’t have to be perfect and they don’t have to stress

[@Thom-d7r]

Been looking forever on how to build a sailplane from foam board. Very good information on how too. Thanks for taking time to create this video.

[@jamesceastep8874]

You are a true craftsman! I love your home-built tools to assist your precision construction. Thank you for this wonderful service to our hobby.

[@SDiYchannel01]

Very creative foam cutting tools !

[@samnelson3526]

I like that you included a thrust test of the motor and prop, very useful info. Great work

[@volkerracho7257]

real nice editing! would love to see more build videos in a quality like this! thanks for your work!

[@paperalex5835]

I knew I’d never see the appeal of foam building….until now. I’m so glad I was wrong :) Also, your directing and editing skills are amazing

[@hajosmulders]

Reminds me of my first RC plane: A Gentle Lady 40 years ago

[@thomasdavis5230]

I recently bought the sophisticate lady, I believe that came after the gentle lady.

[@wiltonguilloryjr8763]

Still have your 049 engines?

[@hajosmulders]

No, I actually moved continents since then. I do have fun memories of my Cox buzzing...

[@josephcosta4984]

I built one too!

[@boxlessthinker1973]

I had one of those. Hasn’t flown in 40 years😀

[@ajaychoudhari1720]

Moet beautiful and detailed rc aircraft construction I've come across. No music is a bonus. Thank you.

[@alex8527-w1q]

The way you stiffend up the Vertical Stab with carbon fiber strip was so simple yet genius..... I'm going to remember that trick for future building. You should be doing this work with balsa and end up with a REAL plane! Sorry, I just am a balsa/ plywood purist. My first airplane was a Carl Goldberg Eagle, and I STILL have it, ready to fly anytime. That was 24 years ago. No Foamy is going to be usable after that amount of time. Still flies straight and true, though it's a little heavier from the bracing and epoxy used after it's 2 crashes. Anyway, your video gave me some good ideas on building, as I've taken a few years, (Read MANY) break in building/ flying only to see that I can now make everything FPV if I want to. And I'm about to build and modify a Great Planes Spirit 2M Glider, and electrify the nose with a pretty hefty motor and use it for long distance FPV. Thanks for your posting this video!

[@salary_to_profit]

I really loved the way you preciously craft the parts and they fit real good, You have patients to wait to glue every parts as it takes time to dry. :)

[@wingnutzster]

You’re evidently quite experienced in working within depron, small tricks like taping the end of the blade and using the full length to slice can only come from experience. Very nice design very well made thank you.

[@ayoaina_fpv]

Another great build! Bravo! 👏

[@dhrubaray3038]

8:17 what is the distance between 1 and 2 And what should be the distance between 3 and 4 for making the wing Is it 50 CM ?

[@NumaVIG]

yes, 50+50+50+50=200

[@dhrubaray3038]

Thank you so much

[@superworm1233]

Why is it that super skilled people meet everything look super simple and easy? Awesome work

[@FF-es6nt]

very good ideas 👍and plans from NumaVig, but plz, where to buy "Titan Wild "glue ? I did 'nt find in France

[@NumaVIG]

Use UHU Por

[@Andrei011000]

Ну Вы заморочились. Браво!!!

[@yousifyousif2446]

Absolutely brilliant job Sir! I will watch the video over and over again. Well done 👏

[@MasboyRC]

Great video !! I fall asleept during watch this video. Its so relaxing 😴

[@gonza6999]

hey! It would be very interesting if you build a f5j 2.6 at 4 meter. 12g x dm2 fai !

[@danielmontmeny9880]

All your videos are a pleasure to watch, excellently designed plane. Keep up the good work! 👍🏻

[@АлександрИванович-з7ы]

И наглядно, и красиво, и забавно местами, и компоненты расписаны, и схемы выложены, и никто не балаболит, и музыки дурацкой нет. Но почему нет ляма подписчиков? Хотя х5 за год - тоже хорошо.

[@k6lsn]

True Artisan. Learned some things watching. Lots of patience too. Peace ☮️ Wheelchairjohn in Idaho USA 😎

[@AlexanderBessalov]

Как всегдап у автора красивая работа. СПАСИБО.

[@MrYeshwanthln]

Unmatched skills, Excellent, love to watch your videos, neat and clean

[@varunikas702]

Your build is satisfying ❤️😀❤️

[@oldflyingman7581]

Very gifted in original creations!

[@tec730]

Very good scratch built !

[@lulufpv]

Realy nice build ! I‘ve got just one question… the wing should i make it whit 3mm or 6mm depron ?

[@NumaVIG]

9:21

[@lulufpv]

@@NumaVIG aaaah ok Thanks i haven’t seen that you mesure the foam thickness

[@NumaVIG]

@@lulufpv you can measure everything yourself after you print the plans

[@lulufpv]

@@NumaVIG ok

[@berriot30]

Hello this plane is it made for beginners in modeling please.

[@kubadul2102]

Fine glider! You used 3 or 5mm depron to make wings?

[@NumaVIG]

3 mm skin

[@kubadul2102]

​@@NumaVIGThanks

[@mathewwebb522]

Another great build. Well done. I've subscribed. Look forward to more.

[@xtofduurr]

Do I see this right? All parts use 5mm foam, except the outer part of the wings which are 3mm? NumaVIG your build videos are so classy.

[@bwanna43]

great techniques, good learning. thanks for the generosity to share

[@АндрейЗакроев-с1з]

Просто шикарно. Технопорно прямо-таки)

[@sultanarazia7120]

Can I use 2400kv motor for fast fly

[@coverdestroyer3572]

How to curve the wing?

[@thierryreymonenq8824]

Salut Merci pour le partage du plan Ou ce trouve le centre de gravité CG ? Merci

[@NumaVIG]

kzbin.info/www/bejne/ZpKVnZmgiJidnaM

[@Abrecadebre]

Excellent work!! May I know the maximum take-off weight?

[@lookvik610]

Отличное видео. Давненько ничего не было. Спасибо большое.

[@denden1083]

Great job ! So light !

[@HomeIdeasYT]

Great work!

[@stefanozambelli6426]

Really a nice glider. Could you tell me where is the CG exactly? Thanks.

[@NumaVIG]

kzbin.info/www/bejne/ZpKVnZmgiJidnaM

[@christhebigone4135]

Very nice video, thank you for posting and the work that went into it's making

[@saicharan2874]

Hey, what's the position of COG on the wing with respect to leading-edge? By the way, the build was awesome👏👏👏

[@NumaVIG]

kzbin.info/www/bejne/ZpKVnZmgiJidnaM

[@Rsanderhoff]

Absolute great design- thanks. Would it be possible to also upload A4 format drawings?

[@NumaVIG]

kzbin.info/www/bejne/hZzZlGinrb-mn6M

[@jeanpierresemonin8133]

Bonjour merci pour vos montages , mais en France impossible de trouver de la Colle TITAN Wild comment faire pour m'en procurer Merci

[@xtofduurr]

En France la colle universelle de la marque Tesa fera l'affaire.

[@filmoklm]

fantastic video

[@Ihmawtd0]

Блин, как же круто! Очень интересно выполнен "механизм" соединения законцовок крыла. А где вы покупали цветной скотч?

[@NumaVIG]

в интернете

[@АлександрИванович-з7ы]

Цветной скотч тоже начал искать после этих видео и нашёл целую кучу в обычных канцтоварах и строительных магазинах.

[@84npor]

Hi. I've got AEO 1304 3000KV. Can I use it on this plane? Thanks

[@NumaVIG]

yes

[@84npor]

@@NumaVIG Thanks

[@arwo1143]

What glue are you using? All the glues I can get my hands on just melt my depron PS: if you know about any specific ones that are easily available in Europe/ Germany, that would be even better

[@NumaVIG]

UHU Por

[@antoniosandoval62]

Congratulations, what a fantastic job you do; I really appreciate it a lot and I would like to know where you got the set of very efficient manual drills that are very practical for making airplanes. Best regards.

[@NumaVIG]

go to webpage with plans (link in description)

[@kuldipAerotek]

Truly professional 👍

[@serdtsev]

Добрый день. У меня есть пригоршня мелких моторов 1811-2900KV с тягой в 140-150г. Как думаете, потянет такой движок этот глайдер или хиловат? Не знаю куда их применить уже такие немощные

[@NumaVIG]

с руки запросто, ему много и не надо

[@pritenshah8709]

Please please please can you make an airplane with a detachable wing design, i.e., both the wing halves can detach with screws or something, for easy storage of these models??🙏🙏🙏 Regards from india 😁🙏🙏

[@aditiasaputra3804]

What brand of knife do you use, it's so sharp

[@NumaVIG]

OLFA Black Max

[@gasperbucinel]

Well done sir! Where did you get rotary tool??

[@NumaVIG]

go to webpage with plans

[@carlosfrondizi6935]

EXCELLENT VIDEO. I LEARNED A LOT FROM IT. CONGTATS carlos

[@asafgl4281]

Great job as usual... What is the material??

[@NumaVIG]

XPS foam

[@heady2008]

It's used in underfloor heating and is similar to Depron. In the UK B&Q sell 3,6 and 9mm sheets under their Diall brand www.diy.com/search?term=Diall+Polystyrene+Insulation+board

[@MrMadwolfk96]

Какая центровка у этой модели ? ( если можно то в мм от передней кромки) сделал как у автора и не летит(не управляется совсем по рудеру)

[@NumaVIG]

центровка вещь индивидуальная (задирает нос значит сдвинуть аккумулятор вперед и наоборот) я летал с такой kzbin.info/www/bejne/ZpKVnZmgiJidnaM . Рудер тут огромная лопата да еще в струе от пропеллера, рулится прекрасно и по крену в том числе

[@szajba8106]

Great design! I've been trying to print out your mustang and make it, sadly it's in JPEG (I think) format and I can't use normal A4 printer to print it out. If you would import plans in PDF in vectorized graphics it would be very easy to scale them up without quality loss and to print them home printer via Adobe Acrobat reader printer menu

[@NumaVIG]

use any JPEG graphics editor or software of you printer to print A3 in two A4 kzbin.info/www/bejne/hZzZlGinrb-mn6M

[@flyassam6747]

Please make a RC sky arrow plane

[@siratali506]

Bonjour. Comment impression le plan Svp merci

[@Данди-х3ы]

Пожалуйста, скажи в каком Леруа ты покупаешь подложку под ламинат (белую).

[@NumaVIG]

в Максидоме, но там не всегда белая

[@Данди-х3ы]

@@NumaVIG спасибо

[@Josefppaz]

Great videos man. Reminds me of my Olympic 650 I had a a kid 👍

[@shankill178]

Superb building sir.

[@arthurbatera2011]

Hello Friend. I would like to know what software you use to design your plants. Thanks!

[@NumaVIG]

Photoshop

[@arthurbatera2011]

Thx...good flights for you!

[@QDStrength]

I have similar method at making wing joiner from wood, but now I have 3d printer I just print it, sub

[@mgxexperiments240]

I am new to this hobby, please give me this plan pdf for free .. would be greatful 😊

[@nenep5695]

You can find his plans on his website, the link is in the description of the video

[@Andrei011000]

Наконец Вы применили нормальную технологию резки пенопласта.

[@miguelmoreno6865]

Está muy bien hecho, eres un artesano. 🇯🇪

[@saulherrera7064]

where can I get the plans for this glider ?

[@NumaVIG]

in description below video

[@anthony3D]

Very good work 😎

[@efMoe87]

15:23 0.05g of leftover plastic NumaVig: and i took that personally

[@przemekwarzycki6516]

Hi wehere i can get plans

[@NumaVIG]

in description

[@Михаил-1979]

Класс! А как чертёж скачать?

[@АлександрИванович-з7ы]

Правой кнопкой мыши - сохранить как..

[@Михаил-1979]

@@АлександрИванович-з7ы спасибо. Не додумался

[@glensanders7608]

Where can I get plans Many thanks

[@NumaVIG]

link in description

[@74052]

And where do you get the XPS underlay?

[@АлександрИванович-з7ы]

1. Leroy Merlin - hardware(or DIY) store. (in this video) 2. Google + xps underlay for laminate

[@NumaVIG]

try asking on your local aircraft model forum

[@74052]

I’m so confused where do you get those patterns…?

[@marc_frank]

he creates them

[@MarkPrimavera]

Link is in description :)

[@davideconsalvo1645]

Cool brother

[@scottiniowa1]

May have to make this one...

[@peterzingler6221]

This is asmr for plane guys... Sadly I can't find this type of xps at my hardware store :/

[@sikandaralirakib]

Thank you so match ❤️😘

[@danielscoggins4594]

I can only imagine the few dislikes coming from from truly jealous souls.

[@MarkPrimavera]

My scratch foam aircraft construction starts out good but I am no where near the neatness of @NumaVIG - put me in the jealous category. I'm finding it hard to get a good glue other than hot glue gun and epoxy and I don't have patients for UHU glue.

[@szajba8106]

@@MarkPrimavera you don't have to be "patient" for polymer glue (UHU is polymer glue as well). You simply put parts together and use masking tape so they'll dry in the position you want them to. If you don't like waiting you just got for another part of the plane and prepare it. Hot glue is nowhere as precise as polymer and is way lighter. However, hot glue is very useful when gluing firewall and landing gear since it's a bit flexible and will allow a little movement without breaking off

[@MarkPrimavera]

@@szajba8106 Thank you for the comment and I have started using UHU, you are right, while it is drying work on another part of the plane or what I sometimes do is clean up the workshop :)

[@szajba8106]

@@MarkPrimavera exactly. In the beginning I wasn't very happy with long drying glue but unlike hot glue it lets you adjust parts together. If you make a mistake with hot glue you can't fix it

[@SAMETELMACI]

geldi gönlümün efendisi

[@dronefootage2778]

i have a random question (new to rc here), what is it with you rc guys and the messed up units. for example you say 2000mm, who even does that, it's 2 meters yo, if you like so many zeros why not 2000000um?? same thing with the batteries, i see 50000mAh, yo, that's 50Ah what is with the units that rc people use i just don't get it.

[@claudioaeromodelismo4680]

you live in Russia in my city fortitude Leroy Merlin does not sell depron

[@ЕвгенийТравин-г9д]

Hi! He is using undarlay for laminate flooring. Look for XPS sheets (Extruded Polystyrene Foam)

[@АлександрИванович-з7ы]

Я тоже живу в России и в моём маленьком городе такое не продаётся. Try - google + "xps underlay for laminate", or "XPS foam"

[@heady2008]

The foam is also used in underfloor heating so worth checking companies who sell those products

[@robsonbohora]

Show meu amigo... parabéns.

[@legorj35]

Its ASMR

[@idexmas]

Очень круто!

[@MarkPrimavera]

I started construction today on this glider, and so far so good but still not as neat and tidy as NumaVIG's work. We don't have this 5mm XPS foam underlay in our area so I used my table top foam cutter to make 5mm sheets from pink XPS foam, works very well. To see the foam cutter go to kzbin.info/www/bejne/jZWpnKNrYsaGhbs - it really works great!

[@KordianPawelec-wz5em]

Genial

[@altamirofaria5741]

👍🇧🇷🇧🇷🇧🇷

[@anthonyrafacon2303]

Subscriber

[@sajalacharjee7008]

You should add background music.

[@NumaVIG]

no

[@sajalacharjee7008]

@@NumaVIG why man

[@АлександрИванович-з7ы]

@@sajalacharjee7008 ASMR! :)

[@MarkPrimavera]

It's one thing I like about his videos, I agree no music.

[@jamesceastep8874]

I agree, in this case, no music allows us to focus on the details of the outstanding videography and workmanship.