very nicely explained the concept of cantilever slab reinforcement. Thank you.
@DrSuchitaHirde_CivilEnggVideos2 жыл бұрын
Thanks for good words
@chiragsinhzala57852 жыл бұрын
Thank you so. Much mam for this video series ❤️❤️❤️❤️
@DrSuchitaHirde_CivilEnggVideos2 жыл бұрын
Good to know that it helped you
@AdarshKumar-dl6lq Жыл бұрын
What if reinforcement detail is not given and nothing about to calculate modification factor ,Then how to calculate depth as per deflection criteria. Most of the books like made easy and ies master simply devide overhang length by 10 . Usually we know this value is 7 in case of cantilever beam/slab if span lenth less than 10m , Do you have any explanation about it?
@DrSuchitaHirde_CivilEnggVideos Жыл бұрын
The value 7 is to be multiplied by modification factor of 1.3 to 1.5 to decide depth initially. If you calculate, it will come around 10. So made easy might be using 10 directly. Initially we have to assume modification factor and once you calculate reinforcement you have to check for actual modification factor.
@Er.Pravinkadam2 жыл бұрын
Mam during calculating percentage of steel why we not taken D overall Please see at @9.00
@DrSuchitaHirde_CivilEnggVideos2 жыл бұрын
We get overall depth after adding cover to effective depth. Cover is provided to protect reinforcement from environmental effect for serviceability purpose. So for any of strength calculations we take effective depth only.
@aniketshinde1515 Жыл бұрын
Thank you so much mam for that kind of explanation if mam to learn from you to join our classes whats a procedure for it
@DrSuchitaHirde_CivilEnggVideos Жыл бұрын
You can watch the videos on this channel. In case of any doubt you can write in comments.
@praveenshrestha132 Жыл бұрын
Is this design is through the slab.madam doesn't it shall be reduced providing beam support.actually I m trying for 2.4m cantilever slab.does this shall be helpful for design of beam n slab both
@DrSuchitaHirde_CivilEnggVideos Жыл бұрын
This video is for cantilever slab.
@praveenshrestha132 Жыл бұрын
@@DrSuchitaHirde_CivilEnggVideos can u make vedio for cantilever and slab too
@praveenshrestha132 Жыл бұрын
Anyways m mechanical enginner but have to work on steel structure.thanks for your understandable vedio madam.if I could get cantilever design with slab it shall be appreciated.once again thanks for Ur vedio
@xyzabc-wh8xb2 жыл бұрын
What to do if dprovided
@DrSuchitaHirde_CivilEnggVideos2 жыл бұрын
Either take higher grade of material or increase depth and recheck.