A couple of days ago, I didn’t know drone racing even existed, I didn’t know what an FPV was. In Zimbabwe drones are rare let alone FPVs. I saw you on Potato Jet. Since then my interest in FPVs has exploded! Dude the Bugatti / Rally car videos were awesome too!
@NURKFPV3 жыл бұрын
hey!! awesome! I'm glad that you found me through Potato! Gene is a great guy and I hope to collab with him again soon!
@ChrisFloyd3 жыл бұрын
Hey bro. If you need help let me know.
@leonardfpv3 жыл бұрын
You‘re gonna love the community! Everybody really helps eachother out, that really helped me start off as well!
@PaneInTheGlass3 жыл бұрын
welcome to the hobby bro!!
@PhatSkies3 жыл бұрын
If you ever need help you got an amazing community to get answers from
@rednecktech94853 жыл бұрын
Audio sounds so good!
@NURKFPV3 жыл бұрын
Thank you! Finally got it figured out!
@domenmuzga20083 жыл бұрын
it's good quality, but very low volume, i usually watch stuff at 12% and i had to bump this to 40% to get close to normal, and i've watched many Nurks videos.
@calypsoraz43183 жыл бұрын
I really appreciate your enthusiasm for new pilots (operators?).
@zandolifpv3 жыл бұрын
Radiomaster TX16S instead of that Taranis
@leffler23 жыл бұрын
Learning to solder is right up there in building/repairing electrical components. I attended virtual classes at KZbin University to major in soldering. Rewarding to say the least. At this time, I’d like to thank all the online professors who helped in this late-life endeavor! THX NURK!
@mathieuf.27883 жыл бұрын
Learn to build your own drone, such a good piece of advice, parts list make it easy and there is plenty of content for building entire drones and build tips. Tks!
@2high2flyfpv883 жыл бұрын
Exactly!!!
@Dr.Souravagrawal3 жыл бұрын
1- buy controller and a simulator and practice 2- fpv goggles 3- make your own drone
@lynxfpv3 жыл бұрын
I agree, want to get everyone flying! When ever asked what's the first thing to "invest" into is your controller(radio transmitter). I do hope more people in my area start flying FPV. If it wasn't for DroneNation app I wouldn't have any body to talk to in real time. Being able to talk with an connect with like minded good people whom are interested in the same hobby is a blessing. That an KZbin content regarding building!! Thank you for your first Shendrone Squirt videos! After seeing what you did I knew I needed to build a cinewhoop, an has been one of my favorite quads till this day. Plan on going out an filming some trees due to fall an the colors of the leaves. FPV has literally changed my life for the better. An you Paul have been one that has been a positive influence in my eyes. So thank you.
@JohnFSmitheugene3 жыл бұрын
Nice video, Paul. And I really like your curriculum for FPV skill development. I hope you don’t mind me adding a note to your sim use recommendation. After you have flown the sim long enough to feel confident that FPV is for you, you should strongly consider purchasing your goggles at this point, not a cheap set, but the set you intend to use as your “daily driver”. I recommend this because of my own experience. I got a deal on some HDOs a while back and ended up buying them before I was really done learning to fly the sim. Looking them over, I noticed the HDMI in port, and suddenly realized that I could fly the sim using my goggles instead of looking at a computer monitor. My progress suddenly went from hard-fought to easier and more rapid and I felt so much more comfortable flying the sim. It really helped me learn. Something to consider.
@MicBergsma3 жыл бұрын
Thanks for this! I can’t wait to get started after I finish my VW bus restoration haha so expensive project 😆
@DMDphotography3 жыл бұрын
Love your channel! Can't wait to see what you do with an fpv drone.
@abdulr53203 жыл бұрын
Great project you are working on , love your work/videos . Nice to see you here 😊
@noname-fc4kl3 жыл бұрын
Quit now fool
@LennyKay3 жыл бұрын
Herzlichen Glückwunsch zu 100.000 Sub s !!!! Greetings from Germany
@NURKFPV3 жыл бұрын
danke! Greetings from USA
@unknownpjh14013 жыл бұрын
@@NURKFPV lol komst du aus Deutschland oder sprichst du nur deutsch Greeting from germany too
@Quadcopterguide3 жыл бұрын
@@unknownpjh1401 Die meisten wissen schon ein paar Wörter oder kennen Google Translate:D
@doncunningham31243 жыл бұрын
For me, I like building and tinkering as much as i like flying fpv. I believe it's an important part of the hobby. And also just as rewarding.
@ClaraCl20053 жыл бұрын
I've spent about 50 hours flying in a sim and maybe 2 hours in the sky with my 5". so I feel like the sim has helped me save lots of money that I would have spent on countless crashes and multiple lipos. The sim is actually how I get away with only having one healthy battery.
@KhoPhi3 жыл бұрын
How long does your healthy battery let you fly? And care to share the link to it? I bought 3 of 1.3k mAh batteries, only one charges at the moment. Batteries I received like 2 days ago. Not sure if my charger too is faulty. I don't mind the price, but I could use a really really reliable battery for the quads (I've got 3 quads at the moment - 2 Cinewhoop, 1 freestyle)
@Ali-rb4bo2 жыл бұрын
@@KhoPhi abt 4 mins for me with no gopro
@wardope3 жыл бұрын
I have been in the fpv scene since 2016. back in 2018 I broke my foot and was unable to go out and fly for about 14 weeks and then the winter came :(. so with almost endless time at my disposal. I booted up the simulated and practiced both racing and Freestyle for at least 2 hours almost every day. Fast forward about 7 months. was able to go out and fly again. and the result was immediately recognizable. I was doing tricks and flips hitting gaps and flying just like those guys I followed on youtube. My skills had improved by at least 500%. so if people doubt if Simulators are worth it. 100% yes they are. they will make you a better pilot.
@CikguSyawqi3 жыл бұрын
what sim did you use?
@2dimples_dad2553 жыл бұрын
agreed
@pedromessias465 Жыл бұрын
What sim did you use?
@Joey.Alford3 жыл бұрын
I wish I would’ve seen your stuff before I dove in head first... I made so many mistakes (outlined in a video I just put up funny enough). Videos like this are the saving grace for beginners so thank you!
@KhoPhi3 жыл бұрын
Going to watch yours after watching this. Built my first FPV Cinewhoop, and received 2 pre-built quads too just today. Too much info out there, no idea where to start.
@Joey.Alford3 жыл бұрын
KhoPhi my advice on starting is to just do it and to be prepared to make adjustments as necessary. Of course a sim is the best place to actually begin but when it comes to flying irl, definitely be ready for lots of challenges!
@shmuckling3 жыл бұрын
One of the best, most helpful videos I've found in the 5-6 months I've been interested in FPV. I'm a TinyHawk behind now, but I did learn some of the basics of flying, so not a total loss.. (managed to keep the little guy alive for a couple of months, believe it or not). I wouldn't mind learning how to fix it, it's always going to be my first drone. Definitely going to follow this advice from here on - it sounds well thought out. Thanks!
@NURKFPV3 жыл бұрын
Glad that you found this helpful!
@breakalegfpv95323 жыл бұрын
NURK nailed it, this is just what I wish I was told before I started. I went for top shelf and it broke me before I could even fly. I spent thousands because I did not start with a toy first. thank you for your inspiration .
@sunsetpark_fpv3 жыл бұрын
Great video! Your timeline is PERFECT. I am a newb who did it backwards. Bought tools. Built a 5 inch. Bought radio while building. Bought HDO2's, Immersion RC module and antennas, batteries and a charger. But I couldn't fly for shit! Scared to YAW lest I lose heading and crash (again) Discovered smaller size drones and decided I wouldn't kill anyone if I crashed. Much safer. Discovered simulator. Enjoyed flying carefree for a lot of hours. PS - I believe that I am finally ready to fly my 5" FPV without killing anyone or destroying my quad, and I am quite proficient at repairs 😁 Everyday I learn something - whether its from a KZbin vid or from experience. Thank you Nurk, you seem like a down to Earth, humble dude ( much love and respect when you said @ 12:17 - I'm not gonna even try to sell you those before I say "go learn how to build it yourself" )
@KhoPhi3 жыл бұрын
I built my first Cinewhoop last week. 😁 I've also had about 20 hours flight time in liftoff
@RCOverKill3 жыл бұрын
The Tinyhawk was my learning tool. I would fly for 5-6 hours a day at first racing a course that had about any obstacle you wanted. Smashed into rock walls at almost full speed, and maybe knock a prop off or crack the 10 dollar frame that's easily repaired. Good video Nurk🤟
@Tymiec13373 жыл бұрын
Wish I saw this video 9 months ago and wouldn't have bought Tyro 119 but still it was not the worst experience. I'm looking forward to future videos. Keep up the great content!
@jackdaniels79133 жыл бұрын
All grate points and thank you for keeping some content relevant for the noobs, as a now seasoned operator it's still nice to see you keeping it fresh for them as well. 🥃cheers🍻
@jackdaniels79133 жыл бұрын
Ps. I saves up for a long time to get the best I cooed at the time "fatshark HD3's" still rocking them to this day! Top end antennas and laforge diversity yep still rocking them to, x10s yep, crossfire full size yes sir, ISDT t8 hell ya!, think tanks airport helipak you know it! And each investment took months and some times years to save up and justify but there is so much money saved only buying it once that I'm not sad about any perches I had a few months to think about and research before getting! Good luck to all the new pilots and make ever perches count save up and get what you really want not what you can afford today but what want and can get in a few more weeks or months.
@MrRckjms833 жыл бұрын
Awesome and infirmative!! Ima share this to people who come up askin how to get i to the hobby!! Great stuff man!!
@skibaa13 жыл бұрын
Regarding googles - I started with FX Viper, intending to buy a better one later and to convert the Viper to spectator's screen. They are bulky, but do the job, have a diversity to use different antennas and allow me to record my flights to DVR. So far I'm happy with my decision, I flew with Viper for 3 months at rate 10-15 batteries a week and now I pre-ordered Skyzone 04x after seeing countless videos about high-end googles. When I started to fly, I did not know too much about googles, so I selected a cheep one which can later serve as a spectator screen, and I would recommend everyone to follow this path.
@stavfpv83543 жыл бұрын
Awsome video nurk spot on with your information I wish I seen this 5 months ago I started with buying 5 inch race freestyle quad not the best to start off with they are intimidating I kept at it went through couple esc and didn't know how to fix them I got sick of taking it to the shop so i learnt how to build them off youtube I'm loving it I enjoy building them just as much as flying them it's pretty cool knowing ur flying a quad you built ur self 💯🤙
@phillipmilburn16463 жыл бұрын
😲🔥🔥🔥GREAT vid bro DRL rules been learning acro in free flight such a handy SIM thanks for the hard work you put in bro 😆much luv UK keep safe👊
@scottchaffee10043 жыл бұрын
I enjoy my FPV hobby with a fun passion. I take the obstacles of flying as a challenge. It has taken two years and a thousand flights to gain my current experience. I enjoy flying almost every day.
@krzysiek87853 жыл бұрын
9:30 True, I have 14 years I' m in hobby for 3 years, and I started from building 5'. Building drone is so fun.
@NURKFPV3 жыл бұрын
i like building almost as much as flying haha
@eddiegomez41343 жыл бұрын
Thanks! I started with the Beta FPV Advance Kit back in september. Should've just gotten a good remote and goggles right off the bat; since the only thing good from that kit was the drone. Now I upgraded to the TX16s; DJI Goggles + Rapidfire, and some NewBeeDrones. Its a ton of fun!!
@NURKFPV3 жыл бұрын
yepppp that's what happens haha
@MadDragon753 жыл бұрын
When I first started flying quads, there wasn't any micro or mini drones not like the brushless now. The closest thing was Dromida Vista. Then came the Dromida Ominous that had Wi-Fi FPV. The latency was too extreme. I tried flying with my phone on the holder that clipped to the transmitter. I believe it was capable of acro mode... But how many people are able to fly acro line-of-sight? I finally got my first "real quad" was a Walkera Runner 250 (Deviation that used Multi-Wii not KISS or BETAFLIGHT.😒) from the pawn shop for $100. It didn't have the camera so I thought I'd at least get the deal line-of-sight. That wasn't a problem until repair costs. There's so many people that are lucky to live in the whoop age that are clueless to the struggle we endured just 6 - 8 years ago. I went with the BetaFPV starter kit then the 3 protocol transmitter of theirs.. The rest is a history of their brushless 65's and 75's now 85's. So many choices now! BetaFPV
@2dimples_dad2553 жыл бұрын
Simulator time is key! Everyone has to start somewhere. Even the starter kits (that include battery, goggles, remote, and batteries), like the emax and betafpv versions, can connect to most sims.
@lionfishit653 жыл бұрын
Finally a video for pre-newbe. I wish I watched something like this months back before buying tonnes of non beginner parts. you are the first you-tuber to cover quickly and fully the where do I start and what do I need in a single video. Well done. sometime people with lots of experience forget that you start from the bottom and going up. Well done indeed!!!! G.
@shmuckling3 жыл бұрын
I agree! Same story here, only I didn't overspend, but instead just kind of went from "flying everyday and loving it" to "haven't flown in like 3 months because everything is broken I have bills to pay first". Definitely going to go with the controller+sim option next and just enjoy crashing for free for a while :D
@fpvnwv14933 жыл бұрын
Blowin' past 100k like its a speed limit sign! now this vid? better hang on, bro! Way to go!!
@HolaACchillin3 жыл бұрын
Pretty solid advise. Not what I did but now that I know what’s what’s, this video is a good idea of the plan to flying fpv. Thumbs up!
@NURKFPV3 жыл бұрын
Awesome thank you!
@georgeaura3 жыл бұрын
I have been in fov for 5 years started into cinematic then acrobatics but now I want to go back to the cinematic so just purchased my first actual cine style quad
@LeakyMeat3 жыл бұрын
Great advice, I also wish that avenue had been available to me when I started, the sim time alone would have saved me so much money and frustration with repairing and waiting for replacement parts as I crashed pretty much every session. I also completely agree with the "build your first 5 inch" recommendation, I almost enjoy that part of the hobby as much as the actual flying, I don't enjoy repairs so much however.
@tigfpv38213 жыл бұрын
Thank you! Very informative video,my computer wouldn’t run a sim game good enough to get that feeling,so I went right for it acro and send it! Lol 4 kwad fleet,just got crossfire the freedom! Thank you! (Your a big part of my fpv experience)
@padi-instructor3 жыл бұрын
Great tips Paul. Thanks. Loving your videos.
@overdosed513 жыл бұрын
In 2018 I put nearly 100 hours of acro flying in the sim slowly learned to fly LOS with a 40$ Traxxas Aton 🤣. I also definitely reccomend building your first drone! Its sooo easy these days!
@volkergoe3 жыл бұрын
Excellent intro into the hobby! This is the way - I will now go and spread the word ;-)
@NURKFPV3 жыл бұрын
Awesome, thank you!
@SKIDOOSH3 жыл бұрын
New space looking dope my bro.
@JonWheeler843 жыл бұрын
Respect for all the knowledge you share!
@NoiseBoysGarage3 жыл бұрын
Future proof yourself and have the very best experience with dji fpv . However you should have an analog kwad for that experience and maybe lower cost /smaller kwad . You can very inexpensively add analog to your dji goggles. Great info Paul
@ILLBEDRONED3 жыл бұрын
Best advice you gave me, build your own 5"! 👊😎
@DroneBum3 жыл бұрын
Do it Dan-O!!! 🤣
@jonbbaca55803 жыл бұрын
Great intro, but you forgot about a good quality charger and 5 to 10 decent batteries. When I started I had a shit charger and 2 batteries, and it was really frustrating trying to learn to fly when I could only fly for 8 minutes each time I went to the field. It's a big plus having at least 5 good batteries and a nice charger you can hook up to your car battery and safely charge in the field so you can spend a whole day in the air.
@danimalthefirst3 жыл бұрын
Tip - with a baby on the way, you need to start stockpiling these “non time specific” videos.. Your first 3 months will be a write off for all the right reasons.
@FourthWayRanch3 жыл бұрын
I just got the DJI goggles and new frsky stuff, it all seems to work except can't get bluetooth telemetry out of the Tx. speedybee blue/wifi setups are cool too but it doesn't work for the airplanes. I put my quads on INAV....they fell out of the sky when I hit rescue mode in betaflight.
@pritchfpv60703 жыл бұрын
congrats on 100k dude
@gadgetmerc3 жыл бұрын
But Paul, the new FrSky radios can't connect to micros. The Radiomaster or Jumper is the clear choice.
@NURKFPV3 жыл бұрын
Copy that will update
@jeremy-williamsaerial70843 жыл бұрын
Great video Nurk. I got a tinyhawk2 combo 5 months ago and im addicted. Feels like your Stuart little in a Harrier Jet lol. Now i have fatshark goggles with a taranis xlite and a 2.5 inch and a 5 inch. Love it. Thanks for your inspiration.
@iamshredder35872 жыл бұрын
I learnt or started off for ages just playing Freerider sim on my phone with the touchscreen controls. 😀 Worked though, I mean I got a novice-2 fpv kit with flysky fs-i6 controller after that and picked it up pretty easily. Took a little to get used to a real controller and all but, not really.
@flyadeal5683 Жыл бұрын
Thank you for the advice! Cheers!
@K_Nasty3 жыл бұрын
I want from tinyhawk2 kit . then got a qx7. I got the Eachine ev100s and they were terrible. I got the Eachine ev200s and ive been more than happy ever since. And I built all my qwads besides the tinyhawk and mobua.
@zeroblade65993 жыл бұрын
And batteries! How to treat them, how to charge them, what's good on a charger, recognizing all the different connectors, number of cells, difference between lipo and li-ion, what all the numbers mean.
@NURKFPV3 жыл бұрын
yeah that's definitely something that we need to cover.. maybe I should do a full beginner series..
@volodymyr892810 ай бұрын
Great summary! Thank you!
@AndroSpud3 жыл бұрын
Thanks Nurk, you're the best brother
@Boywonder173 жыл бұрын
But it's really fun to see how gud u are at it kool
@sixtofive3 жыл бұрын
Saying learning to build will save you money in fpv is like saying learning to reload your own ammo will save you money in shooting. At the end of the day you'll most likely end up spending more, and I'd still highly recommend learning both sets of skills. Lets just hope fpv parts don't become as hard to find as reloading components.
@loganconnmusic73143 жыл бұрын
As someone who works on electronics for a living, I'm weirdly not overwhelmed by that side at all. The fact that there are 5000000 other things to learn tho.....
@da_bits3 жыл бұрын
great video btw!! i wish i saw this before i got started
@heroflying3 жыл бұрын
The one thing I think you gotta correct is it is NOT true now that new ACCESS FrSky radios like the QX7 and X9D are directly compatible with Tinyhawks. They don't support D8. I'm not necessarily huge on the QC of Jumper/Radiomaster, but they ARE directly compatible with D8 receivers on many whoops. People need to know this starting out.
@dimanfpv32473 жыл бұрын
You see the one thing I disagree with you on one thing, the 5" unless they have experience in electronics and soldering I tell people to buy all the building supplies and tools but get a BNF to start. If they have never done anything the first 5"drone they fly will be poorly built and completely un-tuned and will probably break on the first light crash because of all the cold solder joints. It's so much better to know what a good 5" is supposed to fly like then hone your skills replacing a motor or installing a crossfire nano. Small victories and easily discovered and repaired failures. Once they become confident in their soldering then it's time to order the parts and build one. I've seen too many people buy all the parts have no idea how to solder and give up before it ever makes it into the air.
@NeverenCH3 жыл бұрын
Yea that's really the only thing i don't agree with either. I'd recommend a toothpick before going to the big boys. But to each their own. Most people i see going directly to 5'' just crash and destroy them a couple flights in.
@mantyfpv74093 жыл бұрын
Completely agree, I'm still new and I can fix anything on a drone and even build a full one myself but the tuning and stuff is where my skills stop so thats why I love BNF
@LeviewFPV3 жыл бұрын
Def agree with this. Bought my first quad, a Cidora SL5 V2.1 I love building stuff on my own and know some thing or two regarding electronics. It's great to buy something you can use as a baseline for your next own built drone.
@2high2flyfpv883 жыл бұрын
Jeez, what's wrong with people? I'm 66 y/o and never flew a drone. After seeing some vids, I was sold. But I didn't have a computer, just a surface tablet that won't run a sim. I watched a few build vids, learned to solder, and I haven't stopped since. I was a total stranger to electronics also but the learning and building is as much fun as the flying part. Yeah, I crashed a lot when learning, but that makes you learn quite a bit faster when you suffer real consequences, whereas on a sim, who cares if you crash? having to deal with REAL consequences makes you learn many times faster than playing on something you can't destroy. Seriously, why would anybody buy a pre built quad? Are you going to send it back to the company every time you break it??? You build your own, you know it inside and out. You break it, you know how to fix it. From every crash, I learn how to make it more durable by recognizing the weak points. Also, if you buy a pre built, how will you ever learn to tune it? I just don't see any serious pilots buying a pre built.
@fitchyyboi3 жыл бұрын
Your quadcave is so rad lol
@NURKFPV3 жыл бұрын
:-)
@EbonySeraphim3 жыл бұрын
Great video. I used it despite being an active RC helicopter (sport 3D style) pilot. I despite when people call it a drone, or ask "is there a camera on it?" Now I can be like "no, *this* is my drone, and it *does* have a camera." FPV for me I'm looking to cruise/sport fly and capture cinematic footage with an action camera. I jumped off the deep end for DJI Googles, Tango II Tx (I use VBar for RC heli, and VBar is too good for RC heli to be concerned with a common Tx), and an iFlight Chimera7. Q: Will I break it pretty quickly? A: For damn sure. Probably not terribly bad, and probably I won't break it doing line of sight as my RC heli ability gives me very strong skills there. Q: Can I fix it? A: I've built multiple helis from kits and have all of the tools including soldering. FPV does seem to require more fine precision soldering onto mini or microcontroller boards which is not something I'm used to, but I don't think will be a problem following guides. Q: Will I hurt someone with a 7 inch quad out the gate? A: Definitely not with line of sight flying. I fly much much bigger blades on an RC heli (potentially lethal 580mm) comfortably in open space. In the RC heli world, the first thing you learn is "throttle hold" to cut off all motor power if you lose control or see something bad unfolding and recovery above your ability. For FPV I plan on being super safe flying around unknown environments (cruising) anyways as flying around/near buildings has zero appeal to me. I also flown a ton of hours in Velidrone, RealFlight (terrible for drones), and DCS: Black Shark 2 (full scale helicopter combat simulator) so FPV flight and helicopter controls and behavior are all super familiar to me. In a sense, I'm picking something up where nothing should be completely new to me.
@weirdmark11 ай бұрын
The link for the soldering iron doesn’t work. It looked like it could be powered from a quad battery. If it’s still available could you send the name. Thanks. Great video by the way. While flying my Avata yesterday, I heard a semi familiar sound. It was a guy flying a FPV quad he built. I have watched hundreds of videos but seriously…there is NOTHING like seeing one in person for the first time. I came home and jumped in the sim. By the way, I have the DRL sim.
@cj6913 жыл бұрын
What I am getting from this video is I need a pair of Fat Sharks ASAP.
@carlosantillan9393 жыл бұрын
The new taranis x9d doesn't do d8. I learned the hard way wasting $300 and hours of trying to bind it with a tinyhawk
@sunsetpark_fpv3 жыл бұрын
Damn that sucks big time bro - I went through a lot of crap trying to bind my TaranisX7S to my Tinyhawk II Freestyle..... at one point I thought that I needed to buy an external JR module for D8 mode but ultimately I didn't. I can relate to your frustration and wasted hours and wanting to tear the frigging hair out of my head.....not fun.
@felipehol13 жыл бұрын
XJT module is the answer to this problem.
@AjaxAS3 жыл бұрын
I made a massive mistake on buying my Taranis QX7, I think I spent like 250EUR in total on it due to it only being available for 150EUR and then it got stuck in customs where i was forced to pay another 150 to the shipping company as I was on a business trip and was not in my home country.
@da_bits3 жыл бұрын
nurk dont forget the newer taranis radios do not support d8 mode. they can bind in d16 but it randomly fail safes and the range is really bad
@RGMGFitness3 жыл бұрын
Good stuff! Can't even imagine having to get started without a SIM. I would have never gotten int he air. 😆😆
@wardope3 жыл бұрын
when I started FPV there was no SIM :D
@wardope3 жыл бұрын
good advice is: Make sure you have disposable income because no matter what. This hobby will add up and fast. so having a broken drone and want to get out and fly but you can't because you had no money to buy parts, and then when you got the money you have to wait for the parts to arrive in the mail that just sucks. I have been there. Now I'm in a different place in my life where afford to just always buy at least 3- or 4 sets of each component. But that will add up Verry fast. what i am trying to say is that if you cant burn at least $100 at any given time then maybe wait with this hobby until you can!
@ottopilotproductions7613 жыл бұрын
Awesome Video! Really Good Stuff!
@keithatkinson60373 жыл бұрын
I would add, make sure you have a computer too. This is a big part of building and setting up quads.
@kristofferMakes3 жыл бұрын
The only thing I would add to this list, is to get a decent charger and learn how to take care of your LiPo batteries. Both in terms of saving money on the lifetime of your batteries, but also in terms of safety. LiPo's are a fire hazard if used without care!
@westoncraig2 жыл бұрын
one piece of advise that i would give is to not go for a racing drone when moving from the tinyhawk or building your own.. i made that mistake and it was just more stressful than fun. Life threw some obstacles and i've not flown for 3 years but coming back into the hobby now, i'm going for a smoother, cinematic feel to my drones which i hope will bring the joy back
@darkpassenger653 жыл бұрын
Thank you very much for this video.
@Freehotdawgs3 жыл бұрын
Awesome video, really good advice!
@newworldodor2641 Жыл бұрын
I haven't seen anyone describe or videos describing how the drone , controller, and goggles communicate with each other.
@PetrolMediaInc3 жыл бұрын
100% agree with this message!
@pranjalyadav99957 ай бұрын
Thank u bro knowledge and experience ❤
@sxrewyooo80723 жыл бұрын
My man nurk doing it again!!
@NURKFPV3 жыл бұрын
erry day son!
@ckfpv3 жыл бұрын
Hey Nurk not everybody has a laptop ,i know ,i tought myself just flying alone at the park,i do wish i had a laptop though for the sim experience
@illusionistsam3 жыл бұрын
I think first two thing one should buy are 1. RADIO 2. FREAKING FPV GOGGLES i have built a drone and bought a controller but could not afford to buy goggles afterwards goggles are so damn expensive because you can get the feel of fpv and if you dont want to continue you just sell it
@ThatFlyinRyan3 жыл бұрын
A1 for sure thats what i recommend !
@johnlheneghan16302 жыл бұрын
I just got started and bought a Tx16s, fatshark Scout , Mobula 6 and a Protek25. I have been into RC planes for 20 years, i have some knowledge about electric motors and speed esc, but no servos involved. The problem is the goggles, i have trouble adjusting to the drone. Any ideas? Thanks
@Arthur4all3 жыл бұрын
I'm not new to this. I have everything on this list. Why am I watching this?
@rockman49er3 жыл бұрын
Lol me to im just here to see how i did compare to what he says
@TheCabanamancan2 жыл бұрын
Nurk....you seem very knowledgeable and I was wondering if you know a texas pilot who knows how to use the tango 2 pro with multi protocol module....I cant get it to bind to anything....I messed up my freestyle 2 software because I thought the issue must of been the drone but now have bought a nanohawk and it won't bind either....any help you can give would be great
@GHETTOCHRIS6662 жыл бұрын
What antenna is that on top of your sharks? The patch looking one. Also,Do you have a video i could be linked that has your input on best antennas for analog?
@keykey7023 жыл бұрын
Great stuff, but the Terannis QX7 is not 70 bucks though, more like double that.
@ofrisela20062 жыл бұрын
I’ve been on the drl sim for around 80 hours in total and also I have some experience with flying basic drones in line of sight, I want to start getting into the hobby but I’m not sure if to spend money on a tiny halk or should I go strait to building my own drone.
@karllauer64523 жыл бұрын
Nurk is good guy !
@MrCrowleyandhisdrone3 жыл бұрын
Great Job
@MariomasterNSMBHD3 жыл бұрын
I'd suggest a Radiomaster TX16S instead of the FrSky. Way cheaper and arguably better.
@NURKFPV3 жыл бұрын
Definitely a solid recco
@Tomas.O.Sullivan3 жыл бұрын
great advice
@5FiveseveN73 жыл бұрын
I bought a Tinyhawk 2 to learn on and wanted to buy a better radio first, will the FrSky Taranis X9 Light bind to my Tinyhawk 2 ?
@satlaesh3 жыл бұрын
How’s it bro nice vid , just wondering If u have any tips, I’m using a X9d and have a LR crossfire module but I can only get out about 700m-1000m before I get a telemetry lost signal then returns as soon as I get closer .
@georgeaura3 жыл бұрын
Great video
@pjongray3 жыл бұрын
Heard the controller/SIM recommendation several times now and have a question. Can one fly FPV with a simulator? By this I mean with some sort of goggles that you wear while flying. Because I have a few “camera” drones and flying them LOS line of sight in proximity to things ALWAYS ends up either without the proximity “shot” OR with the added bonus footage of tumbling to the ground. When I think FPV I think seeing what the drone sees NOT LOS. Just curious, thanks for any insight.
@vatlentinigel3373 жыл бұрын
What antennasetup would you rekomend to a beginner?
@mrvideouploader73 жыл бұрын
foxeer lollipops. they are super durable.
@dragonhank42173 жыл бұрын
What about the over 250 gram registration and where you can fly hassle free? I'm holding back on the 5" because of that.