Great video bro.

Third video I see where DJI's bad documentation about RTK failed the creator. To get it to work, the DRTK2 needs to know exactly where it is, which it can't on it's own to an accuracy of better than a few meters. What needs to be done is: A1. Set the DRTK2 on an identifiable point. A2. Go into the option and write down the position the DRTK2 calculated itself to be at. A3. When you come back (or after a reboot), place the DRTK2 in the same spot, and manually tell it that it is at the same coordinates as before. Or: B1. Set it on a known point (surveyed in advance). B2. Manually tell it where it's set every time you switch it on.

The faa seeing this:

What motors would you suggest for a Squirt build today?

now try the flattest drone you can make.

I want to create a lens profile for sirui 35 mm anamorphic on Sony at 7iv with 1.33 squeeze,😮‍💨😮‍💨,but for some reason it changes the resolution when I go to set horizontal strech to 1.33,and I can't determine correctly (FOV ),Can you give me a hand?

hi, excellent video, I wanted to ask you regarding an anamorphic pente (Sirui 35mm with 1.33 squeeze, for Aps -c) in your opinion, should I create the profile with the video already corrected in the post?

Niceee

Definitely late to the video. But if this project is still a think you should call it the Flounder😂

Send solder!!!!!!

Tell me you're sponsored by DJI :D

Your hat s are bothering me take it off :) at least sometimes, when adjusting the dji googles. I do not get it why not remove the hats sometimes.

I’m probably the 1st person to watch this vid in 2025

Just read an article that a company kept adding blades until the sound produced was in the ultrasound range that we can't hear so it is silent

16:46 ⚠⚠⚠⚠⚠⚠⚠FART⚠⚠⚠⚠⚠⚠⚠⚠

Sold if I had the money I would buy it but I will probably make my own

That thing looks sick man

why lil bro looking for the analog party poopers.

KZbins compression make the comparison without source files quite hard.

I bought the PNP version to use with DJI goggles and controller. How do you connect the air unit to this little thing to make it all work?

Dang this is the first time watching this and I am cracking up at y’all with them damn shades 😂

The motors are actually waterproof

i have a video, no data, and i wanted to manually put in where to track movement.. i guess this software does much more than what i wanted from this tutorial

I used a dji action 4 for my gyro data and when I add the motion data, its hows up for a second then disappears. Any suggestions?

I had a build your self drone. I bought one of this avata online. Because instead of purchasing a cinewhoop one. I think this avata is straight to the point just out full of your bag and fly. Just not like the traditional fpv drone kind of soldering each staff like gps vtx and etc. That’s why I’m curious on this avata and so far I’m happy still worthy in 2024. Soon it will upgrade to avata 2 or 3 😂

Now for fpv kamakazi defence

The years have not been good to Forest Galante 😬

Yt not recommended this 😑 i got here from reddit

Would it be possible to do the whole wiring, but have it be a usb c output for something like a GoPro mini 11? Is so, what supplies / modifications would be necessary? Thank you.

I've seen quite a few videos on the Avata 2 from the camera drone bros, so I felt a bit saturated and bored with the same ol' thing. Seeing an FPV OG test it out renewed my interest. Now it's either getting a NEO to mix in indoor flying this Winter, then be disappointed in Spring, or wait and get the Avata 2 in spring.

Needs struts to link all arms together and put insane amount of filters on it.

I agree its insane that on a saturday morning, you can design then manufacture and build a totally new drone from imagination to reality. 30 years ago it would take a company weeks to do the same.....Technology is Tremendous(Joey Diaz voice) and horrible at the same time.

Why would you keep driving back home?🤔 I have litterally everything with me to build fix, tune and then build again with me at all times 👍🏻

Can anyone tell me if there is a construction video for this setup? I would be interested to know how the control for the gimbal works.

iNav FTW ! 🔥

Hey, I love your videos and how easy it is to follow along with your thoughts and the cool stuff you do! I was just thinking if you think it is possible to directly connect the Dji camera power into an open port on the receiver?

Hi, need some help there~ I was trying to calibrate with my komodo R3D files. I keep getting extremely high reprojection error. Is there any way to fix this? I shot the calibration video exactly as how you shot it, very steady and slowly. Thanks

got one! but it's got a different RC do want the avata 2!

What button are you using to spin the motors up and down? I use arrow keys and it moves the smallest increment

I crashed mine one time and I had to replace the lower cover. But I still love it.

That is the COOLEST lil trick to tell if you have a short in your motors! Just that deserves a subscribe.

awesome video,,, music not so much

Love u nurk, you’re the reason why i started fpv!

Epic review! Oh, look, a train 🥰

Can I put a 4S 1500 milliamp battery on that?

what kind of drone did you use?

7 years already😢

What esc can even handle that?

So, if the camera doesn't record gyro data, I cant do this... I am not going to be mounting a camera on a camera to record the data. Not practical in my sense.

Next do two 8s batteries