NUX: Cerberus FW5.1 Update

[@davidtexmex1616]

This stuff blows my mind, the evolution of gear happening just now is everywhere.

[@CarlitoM77]

Hey Brett, Thx for the demo! I have the Line 6 M9 and I'm not too crazy about how the effects sound thorough my tube amp. How does the Nux Cerberus stack up vs the Line 6 M9?

[@veguetasan5436]

como restablecer valores de fabrica?

[@artmusic1345]

how does it sounds directly in the PA ?

[@mateusoliveira9612]

What a pleasure to talk to you, I'm from Brazil and I only use keeley pedals ... Now right now I have 4 big pedals (Red dirt-Super phat mod-1962x-Katana booster) .... what would be the best order (sequence) ) for these pedals? Thank you very much for your attention ..

[@mattgilbert7347]

Katana>Red Dirt>SPM>1962X

[@star-net9482]

Hello, i'm sorry for my bad English first of all. I have a nux cerberus but it's doesn't work... all lights are open and 8.8.8. writing in little screen. Can you help me? what am i do right now, thank you 🙏🏼

[@joaocarlosalvesdamasceno6497]

Uso um já há 5 anos e não sinto falta de nada atual 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🎸👊

[@ajdelacruz5782]

Hi Brett i just got my cerberus and thinking of loading IR. Can you share me where did you download your ir's. Thank you 😊

[@pageluz2113]

good night, I have v3, could you update it to v5?

[@salvatorecirchetta5801]

Work well on bass?

[@jjhdayo]

Lets say I import a new IR to replace one of the default IR in the Cerberus, how do I get it back if I dont like the new IR?

[@eladguitar]

you just save the current set of IRs by hitting "export". Then if something is not to your liking you can always import them back.

[@mms-melodymusicalstudio2300]

Is noise get and compressor?????

[@robinr.2233]

Do you know of an online patch resource where patches are available for the Cerberus as they are for other manufacturer’s multi-effects units like the Kemper or Helix?

[@tobiasbuchdrucker4353]

I bought one today and it seems, the LED Status didn‘t work...if i select for example reverb for the ctrl-button, the LED indication should have been fully on when i activate reverb, right? But it blinks all the time, if it is on or off...

[@killnoni5032]

i'm in between mooer ge200 and cerberus. Which one should i buy? I have behringer umc204 audio interface and 2 Yamaha HS8s.

[@gustavoalvarez1496]

How can I set a clean preset in this unit, since it doesn't have an amp simulator?

[@meinukey]

I'm considering this unit as well for replacing an amp rig live and have been asking myself the same question. I believe a pretty low gain setting on the overdrive section should do pretty well. That's me anyways since I don't like completely clean cleans, if that makes sense lol.

[@DoctorMcFarlandStudios]

Does the delay have tails when bypassed in a preset?

[@Fretfeeler]

I sure hope so but it looks pretty tweakable

[@jammergreg]

I love this little powerhouse! Do you still love the Marshall Studio Vintage 20/5 head? I have a Friedman Runt with two little one 12 cabinets...i'm thinking of going to stereo with that Marshall hed.a

[@r.dj.p]

Sir, just a question. With the global tap tempo, can I use the Preset Mode and change them playing live without being worried about my tempo is going to change from preset to preset? I mean, similar to Helix, where you can use and change snapshots and the tempo keeps equals.

[@krisztinacsatary5503]

dear Brett! How can I save the factory IR presets before I change them to try some fresh cab IRs? Thanks ( I just cannot export them with the export button...)

[@Dmitriy_Tkachenko]

А метал на этой штуке можно рубить?

[@marknettles]

This sounds very good, Brett

[@nateonearth]

Awesome Update Demo! Thanks Brett! Do you happen to know if you can control global tempo via USB? I would like to sync with my DAW if possible via USB...

[@seggbert]

Hello. What does 'ring' and 'tip' mean. I know those are parts of the plug but i dont Can't imagine what the effect is by switching sth from tip to ring

[@KunalSinghMusic]

Hey, Can you tell me what Amp Cabinets are the built-in IRS based on? I mean the 1960, A212, BS410 etc. Would be helpful in understanding the kind of sounds I can get from them. Thanks!

[@salvatorevitale9165]

Could you explain a it more about your setup in this video? Is the Nux unit going into computer via usb? Or is it going into an audio interface? Which monitors do you use? It would be useful, thank you and well done for this vid!

[@BrettKingman]

If I recall correctly; guitar > Cerberus > analog outs > PreSonus Quantum (soundcard) > Logic Pro X. Cerberus USB for the interface GUI. Monitors: Blue Sky Media Desk 2.1.

[@salvatorevitale9165]

@@BrettKingman when you say analog outs you mean from the Nux “output 2”, in the audio interface, correct? As far as I’ve understood the output 2 is the only one that can enable the CAB simulation and the IR loader. So the Nux is also connected to the computer via usb, right?

[@eladguitar]

@@salvatorevitale9165 in the video his pedal is connected via USB in order to control it. if he wouldn't connect it via USB you wouldn't be able to use the Cerberus Editor software so that's pretty clear. Just to make it a bit clearer: he does not use the USB connection for audio (that is not possible)

[@obendaperkins5574]

Can you assign a specific IR to a specific patch?

[@eladguitar]

yep

[@nachoworld2722]

Hi Brett, a question for you. This unit has 4 efects blocks, overdrive, distorsion, modulation and delay+reverb. Can we add any other effect through the software to include it in a user preset? Thanks a lot.

[@clintwhite3021]

Maybe you got your answer but in manual mode the "control" footswitch (bottom right) can be set via the control button (next to the display) to "mod" or "rev" so it'll turn on or off the reverb or the current mod effect that is selected on the right side of the chorus. So if like me with reverb always on, I can have the same as a delay, chorus and a tremolo pedal on my board at once. You can only have 1 "mod" effect active though, if you want another you have to manually change it OR use in patch mode.

[@shiraga0516]

A video from the official channel pronounced "New-Ex".

[@Polyhum]

How can i setup manually bpm tempo for delay? No with the pedal tapping, to have it for live performance already in the presets for each song

[@mattgilbert7347]

Turn the knob (delay time) and watch the screen.

[@wladyslaweysymontt563]

Hello! Is it possible to modify effects real time after changing preset? In other words to use presets and live control?

[@eladguitar]

yep when you're on a preset you can just hit the button assigned to that preset again to enter edit mode. then you can change everything individually as if it's seperate pedals

[@lekcjegitary-gd1dv]

For me, I judge the "quality" in such devices by the distortion effect. They're deadly here. Van Halen sound at your fingertips. Grade

[@MrFree-vj8qj]

what amp models does it have? I plan on using it with only a PA system, I know the IR can do the cabinet part

[@jonelordieta7573]

It only comes with cab IRs, but you can load any IRs you want, including amp IR. Apart from that, it's purely FX, not digital modelling.

[@MrFree-vj8qj]

@@jonelordieta7573 thank you for the answer, so it's purely FX means it's not meant to be used with PA system but with guitar amps?

[@jonelordieta7573]

@@MrFree-vj8qj If you use the software, you can load your own IRs, including amp IRs, and go direct to the desk. I don't do it myself, but check out Pete Thorn's video, where he records direct with IRs, and no amplifier.

[@matmayer90]

How to choose IRs without Computer? Thks 🙏

[@Arwium-]

could you figured this out? im interested on how to do this too

[@eladguitar]

​@@Arwium- @MatMayer69 you can't

[@matmayer90]

Nice info 👍👍👍

[@youarenotsafe2215]

Wow, so you can use third party IR as well.. thats so cool.

[@bambangdaulay7955]

Nice..

[@racerx3065]

how can they get away with such blatant pedal copying! haha

[@walterstrauch]

Nothing about how to update software......

[@BrettKingman]

Here you go, Walter. kzbin.info/www/bejne/d6CTYmqBl8yceM0

[@homerbugadogrower]

This shimmer is horrible.