NUX MG 30 CLEAN Funk Groove CORY WONG style / Chorus ERIC JOHNSON style

[@southsidejohnny5624]

What a great way to demonstrate these excellent patches. Thank you

[@DirectRecordingGuitar]

Thanks! 👊🔥🎸

[@mengeleto11]

Never heard better patches for MG 30! Great work and great playing! You have a good heart making all this for free. GOD BLESS!

[@DirectRecordingGuitar]

Thanks my friend!

[@drausiekguitar]

The best clean preset for nux mg 30 . Thank you man !!!!!!!!!

[@DirectRecordingGuitar]

Thanks bro! :)

[@brucedickinson8993]

Rapaz, sou Baiano, hoje acordei com uma saudade do forrozão das antigas, resolvi gravar "Hoje a noite" do Calcinha Preta, que tem um solo muito legal. Baixei uns VS na net e estava escutando a base, descobri que não sei tocar guitarra KKKKKKKKKK Lembrei na hora desses patchs, ficaram maravilhosos, inclusive no VS tem uma guitarra que é Wah, e nas scenes dos patchs tem alguns com auto wah também, cara, vc é um gênio. Parabéns! Vou treinar guitarra rítmica de forró das antigas e vou virar um lord da guitarra, aguarde.

[@DirectRecordingGuitar]

haha forró é groove também! Gosto do Dominguinhos demais! Valeu cara. Obrigado.

[@rodolfoduarte8887]

Cara tu é brabo no groove irmão, mão direita fera. Parabéns. Excelentes timbres, obrigado por compartilhar, essa pedaleira é muito boa msm, comprei depois dos seus patchs e tô mt satisfeito

[@DirectRecordingGuitar]

Valeu Rodolfo! Obrigado cara! As Nux são excelentes!

[@DenisGuitarist-21]

Спасибо вам за вашу работу! Не знаю как процессор (не играл), а вот фанк рифы очень крутые!

[@DirectRecordingGuitar]

Hi Denis! Thanks!

[@b.j.surfdog3724]

sounds like you nailed the "manhatten" tone by EJ! well done! any recipes on how the common mamals out there can accomplish that?

[@DirectRecordingGuitar]

Hi! Free patches! Download link in description!

[@reneliebregt6319]

You play very good guitar and you make good sounds. Finally you share this with us !! awesome 👍👍👍🎸

[@DirectRecordingGuitar]

Hi René! Thanks bro! Nux MG30 Playlist: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p

[@jksagara]

Primero!!! Saludos desde Colombia!!!

[@BenjaminKanarek]

Great playing!

[@DirectRecordingGuitar]

Thanks!

[@LordCrushBrasil]

Impecável nos timbres e execuções! És referencia, meu jovem! Acabo de assistir e não posso testar agora. huauauauaua Segura, ansiedade! 🤣

[@DirectRecordingGuitar]

Muito obrigado Paulo. Esse preset clean da Mg30 é a minha base aqui e aceita muito bem pedais externos direto no input da pedaleira também.

[@MaxFalk21]

Esse timbre é muuuiiito versátil !!! Obrigado por compartilhar conosco seu conhecimento!!!

[@DirectRecordingGuitar]

Valeu Max! :) Tmj cara!!

[@alifshaw7235]

Tqvm my bro. Next yngwie malmsteen patch please. Thanks again!

[@jcthemuffin]

Pls make some RHCP tone please sir... 🙌🙌

[@Jose-gb7tm]

Please

[@AkashMondal-lq3hh]

Yes sir ❤

[@juliocesarbarbosa778]

Ótimo som como sempre 👏👏👏👏🎸

[@DirectRecordingGuitar]

Obrigado Julio! :)

[@Hakuakuki-n3q]

Hello sir always enjoy what you did and really appreciate it can you do Eric johnson cliff of Dover sound

[@DirectRecordingGuitar]

I never stopped to study this song but I will soon. Thanks bro!

[@BlackmoreDavid]

Adoro os timbres do Eric em Cliff também!

[@peterthailand9810]

Thanks for sharing Bros

[@dyerao]

Nao estou conseguindo importar os presets! Não me da opção de onde importar os presets baixados, o que será

[@DirectRecordingGuitar]

Fala cara! Você já baixou os presets mas não está conseguindo instalar usando o Quicktone? É isso? No vídeo MG30 vs RAT eu mostro como instalar, dá uma conferida: kzbin.info/www/bejne/kH7Ph6KDrZeGbqc / Se ainda assim o programa não estiver funcionando como deveria vc deve conferir se o firmware da sua MG30 e o Quicktone estão atualizados. Outra coisa, sua Mg30 é versão Global? Se for a versão chinesa talvez não dê certo mesmo pois há diferenças entre elas. A chinesa é feita pro mercado interno deles. Me avisa se deu certo. Abração.

[@Andy1x]

For use in a live show with the mg30 on the floor, would you happen to know how to switch presets using one of the foot switches? Thanks in advance.

[@DirectRecordingGuitar]

Hello Andy! In live shows, I use a single preset for about 90% of the show. I use the Fender Super Reverb + one of my IRs. So in scene 01, I have a clean tone Comp + Amp + Rev (the external dual footswitch is set to turn on and off the Crunch Box or RAT from the MG on foot A and a phaser on foot B), in scene 02 (foot CTRL) I have Comp + Amp + EQ as a clean volume boost for solos + Delay + Reverb so I can play the solo clean or turn on the distortion that's on the external footswitch's foot A. In scene 03, I have a clean chorus with delay. So I hardly need to leave this patch. When I need to leave, I just step on Up or Down, and then quickly go back to my main preset. It's all quite simple actually. But the MG30 is very flexible and can be used in many different ways. Sometimes I add my mini Wah, OCD, or Angry Charlie before the MG30. Then I can use the MG30's expression pedal as Volume and Whammy. :) Thanks!

[@Andy1x]

@@DirectRecordingGuitar I really appreciate your help and insight regarding your own process. NU-X offers little to nothing about this, and it seems like most KZbin videos show guys who do not actually perform. They simply have the unit on a table use the mg30 in that manner. Thanks again!

[@Andy1x]

You nailed it. Apparently it took a shot of Jack for me to figure it out. I can use the up/down foot-switches. I’ve moved my fave presets up front, so that will work perfectly. Thanks again!

[@DirectRecordingGuitar]

Thanks! There are many ways to use the MG30. You can simply use the up/down button or you can choose to use one or two patches and use the CTRL footswitch and the external double footswitch to turn effects and scenes on/off. You can also choose to use external pedals on a pedalboard. It's all very flexible. Let me give you an example: Let's say I'm playing in an Iron Maiden-style band. Then I would have a single preset. With the CTRL footswitch, I would have scene 01 using the JCM800 + IR for riffs, scene 02 would have the TS9 (booster) + JCM800/IR + EQ (clean boost for solos) + Delay + Reverb, and in scene 03 I would have TS9 (booster) + JCM800/IR + EQ (clean boost for solos) + Harmonist in GM/Em + Delay + Reverb. With this single preset, I would play the entire repertoire. In the next preset, I would have a clean tone + chorus to play the clean parts like in Wasting Love and then switch back to the main preset. In this example, I didn't even need to use the external footswitch. :)

[@Andy1x]

@@DirectRecordingGuitar Excellent! Thanks so much. I really appreciate your insight and detailed explanation. It really really helps. Thanks again!

[@cesarbantugan1810]

Thank you very much

[@REIRBL]

Excelente! é groove mesmo! parabéns!👍👍👍👍

[@DirectRecordingGuitar]

:) valeu cara!

[@LuisGarcia-vm7te]

Buenísimo 👏

[@5676Juan]

Hi man, big fan of your work! The link has broke again, could you please send another?

[@DirectRecordingGuitar]

Hello my friend, modifications for the V5 Fw. The video contains all the patch settings starting from: 3:00. You can manually copy them to use with V5 firmware. ► IR download: The IR used in this old fw version will not sound good in the new firmware V5 (2024). After copying the settings I left in the video, select the native BS410 cabinet + U87 Mic (Middle position) and High Cut all closed (at 5000Hz). Thanks for your comment bro!

[@Singerswapnillive]

How does this compare to the hotone ampero or line 6 pod go in terms of amp simulation (specially the fender and marshall amps),audio depth quality of reverbs and modulation ?? Plz tell

[@DirectRecordingGuitar]

Hi! I've never used the Ampero or Pod Go. I can't comment. About the MG30, I think it's excellent! I have a playlist with several videos, using it in many different ways. Take some time and analyze the sounds: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p

[@klaytontrajano2326]

Top demais esses timbres e bem compacta

[@DirectRecordingGuitar]

Isso! :) Mais ou menos do tamanho da GT1 porém tem send/return pra conectarmos pedais externos, temos IRs em 48kHz de fábrica e podemos instalar externos, os efeitos e os preamps são muito bons, o footswitch externo e a fonte já vem juntos com ela na caixa, não é preciso comprar por fora sem contar que os algoritmos de modelagens são modernos, já faz parte dessa nova geração de multiefeitos onde temos Boss Gx-100, Pod Go, Hx Stomp, etc... Gosto demais dessa pedaleira. Como ferramenta facilita bastante o trabalho aqui no estúdio e em shows. Valeu Klayton! Abração! Nux MG30 full playlist: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p

[@AkashMondal-lq3hh]

Sir plz make slash clean tones❤ and clean Chorus tones

[@DirectRecordingGuitar]

Hi, we have Slash tones here: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p 👊🔥🎸

[@alanhenrique5578]

Cara que top... Peguei referência... Também tenho uma. Ainda nos ajuste. Muito top Mano... Meus parabéns 👊🏻

[@DirectRecordingGuitar]

Valeu Alan! Tmj cara! A Mg30 é excelente!

[@alanhenrique5578]

@@DirectRecordingGuitar top Mano... Tmj 👊🏻

[@dawoud8013]

Hello ! it seems that in the "CLN III DRG Oct.mg30patch", the IR setup is not included. Do you advise to import the DRG V30 2x12 SM57 48KHz RP.wav file ? Thank you !

[@DirectRecordingGuitar]

Hi... Is the same IR. I only changed the name for organizational reasons.

[@matthazelby506]

How do you bring up the preamp bit? I always thought my nux was lacking in dirt, can the preamps be souped up to get cleaner overdrives?

[@DirectRecordingGuitar]

Hi... You can increase the preamp drive to the desired level and at the same time lower the volume leaving the preset at the same level as before. Another way is to have the BD-2 on all the time, going to a clean preamp. Set the BD-2 tone and drive between 10 and 11 o'clock. There will be a slight crunch in what was a crystal clean sound.

[@ihsanevrenef368]

Do you use reference monitor in This video, how do you get the sound?I dont think its an amp. İf you use ref monitor which ref monitor is most compatible with mg30

[@DirectRecordingGuitar]

Hello my friend! In this video the recording method was directly to PC using my MG-30 as a USB Audio Device. No post-production work and no ambient sounds. What you hear is what comes from MG-30 and recorded on PC's HD using Reaper DAW. In some videos, I use the Nux PA50 FRFR monitors, so in the first part of the video, I demonstrate the sound using the method mentioned above (without monitors), and then I showcase the sound of the MG30 through the PA50 monitors. Like in these videos: kzbin.info/www/bejne/aF6moHttipp8j5o / kzbin.info/www/bejne/a4GmfaSaetyraac / Nux PA50 full playlist: kzbin.info/aero/PLrxXQYEp-_uhwQuzX3QpiFtKGU0I9rLdr

[@ihsanevrenef368]

@@DirectRecordingGuitar thanx

[@bottadz]

Please we need the same with vox tonelab st

[@davidosborne8562]

Excellent......Not enough clean sound demos of equipment.........nice....

[@DirectRecordingGuitar]

Thanks! I was waiting for this update.

[@AkashMondal-lq3hh]

Make a 80s clean Chorus tone sir ❤

[@DirectRecordingGuitar]

Hi, there might be something like this in this video: "NUX MG 30 MODULATION Effects for Guitar " / The Eric Johnson-based chorus sounds 80s for me. :) It's more in the way of playing, maybe a little more reverb... strat middle and bridge single coils pickups together.

[@alfandomkw5340]

please make it on fx mg300 too🙏

[@helberduarte]

Gostaria de saber como adquirir essa NUX MG-30

[@DirectRecordingGuitar]

Fala cara! Deval Instrumentos é a distribuidora no Brasil. Acho que dá pra comprar direto com eles ou com um dos seus revendedores. Abração!

[@anonimogtr49]

Eai mano! Tô apaixonado nessa nux, na sua opinião ela perde algo em relação a gt-1? Como é o whammy dela?

[@DirectRecordingGuitar]

Fala cara! Não perde nada na minha opinião. Na verdade é a pedaleira que mais uso desde o meio de 2021 até o momento. A GT1 é ótima e podemos ter grandes sons de guitarra e eu ainda a uso bastante mas a MG30 já faz parte dessa nova leva de multiefeitos com algoritmos modernos trazendo ótimos efeitos e preamps, carrega Impulse Response, tem conexão send/return pra conectarmos pedais externos se quisermos e escolhermos a posição na cadeia de sinal e ainda vem de fábrica com fonte e um footswitch dual externo da Nux que seria o equivalente a um Boss FS6. Dá uma olhada nas playlists das duas e deixa seus ouvidos escolherem. Abração cara. Obrigado. *Edit: Tem whammy no vídeo Satriani da MG30, dá uma olhada. Nux MG30: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p BOSS GT-1: kzbin.info/aero/PLrxXQYEp-_uiDn5VHVTag5TeM8dEXdt-e

[@juansperezduartem9155]

Works for valeton gp 100?

[@gustavogerardoquispecondor359]

Gracias ..buen video

[@DirectRecordingGuitar]

Hi Gustavo! Thanks!

[@harley9860]

Need pod go please

[@santana2420]

Great! Have you used the Ampero Stomp II?

[@DirectRecordingGuitar]

Hi... I don't have Ampero. Thanks bro!

[@kunoramirulzaidi2202]

hi. can request THE STROKES guitar preset ?

[@DirectRecordingGuitar]

Noted bro! Thanks!

[@Keeper_Arts]

i love this one ! i tried to make a cliffs of dover one, its on my channel, would love if u test it and fix it :D

[@cesarbantugan1810]

Can you give free patch of steve lukather tone lead please

[@DirectRecordingGuitar]

Yes! I'll try soon! Thanks!

[@elmeromero6559]

great video but just one doubt.. if I want to play only trough headphones . is it necessary to connect the MG30 into an amp or PC?? or can play just trough the headphones without connecting the MG30 into amp or PC?? I'll appreciate someone reply me ..t-you=)

[@DirectRecordingGuitar]

Hello! Thanks! Yes! Just connect your headphones to your MG30 and you can use it without any problems. Connect it to your computer using a USB cable only if you're recording or playing along with backing tracks for practice. Alternatively, you can connect the headphone output of your smartphone to the Aux In of the MG30, and then you'll be able to listen to your chosen songs or backing tracks and play along. Additionally, there is the loop and drum rhythms. I have many free patches for the MG30 in this playlist, so if you need any, just download and install them on your MG30. kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p

[@ajackfees319]

hi can i request for yngwie tone for nux mg 30 thanks

[@ajackfees319]

Hi please help to do yngwie patch thank u

[@fatimapereira3456]

Nux mg 300 tem harmonist, Pitch shifter e octave ?

[@DirectRecordingGuitar]

Sim Fatima! Estão aqui: Nux MG300 Playlist: kzbin.info/aero/PLrxXQYEp-_uj701GD-Tk-r6OGHR3qbuRV

[@BrunoGRPAe]

Eu queria entender como funciona a troca de preset nos footswitch achei meio confuso rsrs

[@BrunoGRPAe]

Gostei muito da qualidade sonora, da interface e da apresentação do produto porem minha única duvida e receio é este da troca de efeitos durante o som ao vivo, parece ser meio confuso e trabalhoso na hora de troca um efeito para outro.

[@DirectRecordingGuitar]

Fala Bruno! É bem simples, fácil e rápido na verdade. É idêntico à GT1. Os footswitches estão nessa ordem, da nossa esquerda pra nossa direita: Down / UP / CTRL / Pedal de Expressão. E pra aumentar a controlabilidade, ela vem com um footswitch externo, que podemos endereçar efeitos por exemplo. É ótima. :) Abração cara! Edit: Eu uso o footswitch externo em alguns vídeos: kzbin.info/aero/PLrxXQYEp-_uiQCE40VwQfoJ8FTFzUpD9p

[@victorbaleeiro4270]

Quero os patches da Boss GT-100, mas o link do PayPal não permite o Brasil 😢

[@DirectRecordingGuitar]

Fala Victor! Isso é coisa antiga. Já conversei muito com eles e nunca acertaram isso. De qualquer forma eu deixo todos os settings de graça nos vídeos. Basta copiar e salvar na sua GT os que vc gostar. Fico muito agradecido cara! Abraços! kzbin.info/aero/PLrxXQYEp-_ui5hGoIA8bMTEQAQ9A2STyB

[@victorbaleeiro4270]

@@DirectRecordingGuitar Beleza man. Obrigado por responder. Sucesso!

[@adilsonvasquez3824]

Hello there, I see your videos since I bought boss GT - 1, but now I can´t not use Boss tone studio because of Adobe, do you know how to keep using boss tone studio currently?

[@DirectRecordingGuitar]

Hi Adilson! kzbin.info/www/bejne/h2OTaJh6jNZ9mLc // kzbin.info/www/bejne/hIGXq55oq7yNp7M // kzbin.info/www/bejne/h4XMdKNteZaKfc0

[@davidosborne8562]

When I install the ir's with your presets my MG30 and Quicktime lockup, any ideas what I'm doing wrong????

[@DirectRecordingGuitar]

Hi David! Perhaps your computer or antivirus is corrupting the file at the time of download. I use this IR on all my devices. And other people are using it too.

[@LeandroGuitars]

Salve mestre show s´não esquece do michael Romeo do symphony x

[@Hazlani]

File not found

[@DirectRecordingGuitar]

Hello my friend, modifications for the V5 Fw. The video contains all the patch settings starting from: 3:00. You can manually copy them to use with V5 firmware. ► IR download: The IR used in this old fw version will not sound good in the new firmware V5 (2024). After copying the settings I left in the video, select the native BS410 cabinet + U87 Mic (Middle position) and High Cut all closed (at 5000Hz). Thanks for your comment bro!

[@dyerao]

Fantástico... ganho 1 inscrito

[@DirectRecordingGuitar]

Valeu meu amigão! Tmj! 👊🎸

[@MrSakhaWorld]

kp it up

[@DirectRecordingGuitar]

Thanks! 👊🏼🔥🎸

[@genaroescalante21]

Que guitarra es esa?

[@DirectRecordingGuitar]

Hi Genaro! Fender Japan 1996, original ceramic pickups neck/mid and Seymour 59 neck on the bridge.

[@ricardadn]

Eres una gran ayuda, gracias!!

[@DirectRecordingGuitar]

Thanks bro!

[@nikolasv1994]

No! Link error :C

[@DirectRecordingGuitar]

Hello, this preset no longer worked with the new V5 firmware. I will adjust it soon. Thanks!

[@riyazriyaz4878]

Line 6pod go please

[@DirectRecordingGuitar]

I have Hd500x. :)

[@riyazriyaz4878]

@@DirectRecordingGuitar So what i do.. Pls help me sir🙏🙏

[@adiningratvisual]

link error :(

[@DirectRecordingGuitar]

Hello my friend! New link in description! Thanks!

[@LeandroGuitars]

Na nux mg 30

[@MrBapidutta]

showing error

[@DirectRecordingGuitar]

Hello my friend, modifications for the V5 Fw. The video contains all the patch settings starting from: 3:00. You can manually copy them to use with V5 firmware. ► IR download: The IR used in this old fw version will not sound good in the new firmware V5 (2024). After copying the settings I left in the video, select the native BS410 cabinet + U87 Mic (Middle position) and High Cut all closed (at 5000Hz). Thanks for your comment bro!

[@arhon_odyuo]

What's wrong you've stopped sharing patches of me 80.... we are waiting

[@DirectRecordingGuitar]

Hi bro! There are many multi-effects! :) And we already have videos of the ME80 that go from clean to higain, including using IR loader pedals. I will make new videos soon. kzbin.info/aero/PLrxXQYEp-_ujVyldjsvpJ4QtyxvkFoc0V Thanks!