NZXT H7 Flow review: New PSU placement gives cool GPU temps

Рет қаралды 7,383

Күн бұрын

Пікірлер: 32

@ИльнурБеркутов 4 ай бұрын

Hello. In NZXT Cam, can you adjust the rotation of each fan separately or will all three rotate at the same speed, thanks (F360 RGB Core)?

@BingoXXIIV 2 ай бұрын

they will run at the same speed. its basically a daisy chain but with a chassis around it

@zxanderszx 3 ай бұрын

Do you think the GPU temps would be better than the previous H7 Flow even without the bottom fans because of the more spacious layout?

@R6ex 8 күн бұрын

IMO, for 1 - 2 slots graphics card mounted on the top slot on the mobo, maybe not much difference, but with thicker 3+ slots cards mounted say 1 - 2 slots down, definitely a big difference.

@松本黒 28 күн бұрын

What is GPU support?

@Ari_G73 2 ай бұрын

Your comments about the LED's at the bottom. This is why I just put 3 Arctic 120mm fans (no RGB) on the bottom.

@1zhidaie 4 ай бұрын

How does the three-in-one fans connect to power? looks interesting

@9to5toys 4 ай бұрын

The fan assembly has a single 8-pin connector, and then in the box is an adapter with a fan connector, NZXT RGB connector, and a 5V RGB connector. It's pretty convenient

@chrism65 3 ай бұрын

@@9to5toys Do you have to use the included case fans for that area or can you use something like lian li unifans?

@KaosII1968 3 ай бұрын

The front triple fan that comes with the case is not the same fan that you showed.... It is not the RGB Core, that is a different model fan. The one that comes with the case is an air flow model that has a minimum speed of 1200 rpm. At least that is what other reviewers have posted, I don't have first hand knowledge of this.

@Ka_Ga_Ri 4 ай бұрын

It's a shame there's no dust filter.

@WorldSexKing 3 ай бұрын

agree

@BingoXXIIV 2 ай бұрын

so true. I got the previous h7 flow and the dust filters help out a lot with catching dust. I wouldn't want to use this new version, which is very disappointing. the h6 and h9 look more promising.

@Catking6560 9 күн бұрын

It's funny because there are so many dust filters on sale and they are so cheap lol

@R6ex 8 күн бұрын

@@Catking6560 Yeah. Just slap on some quality high-airflow Silverstone filters, and such cases will be even better than restrictive stock filters that come with them. I remember watching the video where the stock Lian Li 011 dust filters resulted in 10 degrees higher than without them, coz their stock filters suck! LOL. I'm getting this awesome H7 Flow case for my upcoming 9800X3D+5090 build with some additional Silverstone dust filters, coz I'm lazy to clean dust out from my PC case.

@ToriksLV 2 ай бұрын

I am thinking of doing cpu aio in front instead.

@elex2170 3 ай бұрын

I really hope the H5 gets a similar treatment. This H7 is just too big for my taste. I don't mind if they have to make it for mATX only just to lower the height and length of the case.

@R6ex 8 күн бұрын

With this case, I'm ready for 5-slots graphics cards!

@schoologylibrarybot4311 4 ай бұрын

I dont like the all in one 3 fan unit, if one of them breaks you'll have to replace the entire thing and 70 dollars you can get 3 Lian Li SL fans.

@NINJA_INVESTORS 4 ай бұрын

It buys time to buy your own fans (which you should be doing anyways).

@kristoffer3000 3 ай бұрын

It's also not very good, plenty of reviewers have complained about it.

@KaosII1968 3 ай бұрын

5 yrs warranty .... On the one you buy separately. The Core model triple fan. Also that is not what comes with the case.... that is an airflow fan that NZXT does not sell separately.

@megadeth8592 27 күн бұрын

lian li fans are dogshit and break all the time and overpriced

@carlospcpro 4 ай бұрын

Looks beautiful 🤩

@hpharold23 3 ай бұрын

It's too bad no support for back mother connectors like MSI Zero build.

@NyteStalker89 3 ай бұрын

That's gonna take a year plus for most cases to implement since back connect is finally hitting the market enmass

@SilkySalamandr 4 ай бұрын

I dont understand who looked at this at nzxt and said, "instead of shipping this out with 140s in the front and upping the price 20 bucks, lets ship with 120s as a brick." "Who cares that the front looks like trash with that huge gap, were saving money." What an abomination. Save your money guys and buy the reg version because youll need to fill the front with 140s so it will look at least not cheap.

@R6ex 8 күн бұрын

Agree. That said, will be fine for me, coz I'll just reposition those 3 stock fans down at the bottom and buy additional 140mm fans for front and back.