i was gonna say that he sounds just like Cave Johnson from the Portal Franchise lol
@Isan37472 жыл бұрын
I was wondering if it was him, then saw your comment and was like “yehh that’s him jsjsjs”
@aureldumbrava32304 жыл бұрын
I'll be honest. An air cooler would be just fine for my build, but the Kraken is gorgeous! I cannot resist! Also, it would be nice to get a white version. 😊
@kierannm76463 жыл бұрын
that's what i was thinking as my gaming setup is all white, i think i might just paint it or use a vinyl wrap
@Ben7seven73 жыл бұрын
@@kierannm7646 I would not paint the fins of the radiator, maybe just the exterior portion.
@thearttheftsituation3 жыл бұрын
I have one if these. It's is pretty enough, but did they provide any instructions how to use the software? Nope.
@marckayyy24082 жыл бұрын
@@kierannm7646 there’s a white version!!!
@glyphs3202 жыл бұрын
@@marckayyy2408 yep and I’m getting it for Christmas. I’m so hyped
@youngo24164 жыл бұрын
i feel like you guys at NZXT need to do another video explaining AIO in general and the range of products ie difference btw Z n X and different sizes. and where to plug the cables... a lot of questions and newbies interested...
@Kasmuller3 жыл бұрын
X has rgb and a NZXT logo Z has a OLED display which makes it around 100€ more expenaive
@mojavecourier69877 ай бұрын
There's other channels for that. They make hardware.
@eamonjun4 жыл бұрын
Possibly add clock faces for the next cam software? Having a time piece in the system would look great.
@user-io1lm1wk4t4 жыл бұрын
That’s smart
@PengaPenguin4 жыл бұрын
Just buy a clock
@bobpro5834 жыл бұрын
Maybe a gif?
@itzpayday12384 жыл бұрын
@@bobpro583 lol 24 hour gif
@bk_Syndicate_FL850KH4 жыл бұрын
@@PengaPenguin to poor spent all his cash on the Cooler
@StormadoMan4 жыл бұрын
Two paths to perfection, a full plate threadripper block and CAM software that doesn't just stop working randomly.. then you're set 👍
@yazendaddi91274 жыл бұрын
I can't believe it, a good walkthrough and installation from the actual company. I know corsair does it but in my opinion not as good as nzxt's.
@kurziieee4 жыл бұрын
literally installed it wrong though lol, bad walkthrough
@samsun40563 жыл бұрын
@@kurziieee what is the right way to do it?
@kurziieee3 жыл бұрын
@@samsun4056 So the content of the loop is liquid and air, you want to get the location of the air bubble to be in the position where it doesn't cause problems. The only position inside of an AIO loop where it's safe for the air bubble is the side of the radiator that is NOT connected to the tubes (both ends of the radiator have a tank and in between those two tanks the water seeps through the body of the radiator). Air is lighter than water so the air bubble will ALWAYS exist in the highest point of the loop. If the pump is the highest point of the loop this is obviously the worst possible configuration as it will cool less and slowly destroy the pump mechanism, the tubes and the radiator tank on the side where the tubes are connected to the radiator are also very bad for obvious reasons. Thus the only good configuration is to have the radiator tank that's not connected to the tubes as the highest point of the loop, here the air bubble causes no damage or cooling issues whatsoever, since the liquid will just fall down here back into the body of the radiator without having to "fight" it's way through this configuration also produces the lowest amount of noise.
@infernalpriest81903 жыл бұрын
@@samsun4056 hes right, this video is WRONG, watch this one kzbin.info/www/bejne/eJOqoKCsZp5oqc0
@suborgulag72893 жыл бұрын
@José Mann I've had enough of armchair experts telling people what to do, even bottom mounting an aio is more than fine as long as you don't plan to use it out its warranty period, by that time it would probably fail even if mounted 'correctly'; now let alone this orientation with rad in front and tubes up top, most aios don't even have tubes long enough to get them to the bottom
@dierkrieger2 жыл бұрын
I went through all the steps but what ended up fixing it was unplugging the micro usb from the water block while the computer was off and it reset. This was a great video, THANK YOU.
@48some Жыл бұрын
Honestly i love this brand soooo much for its aestics and logics ! Thanks for all your products!
@BikieMC4 жыл бұрын
Yes! I love NZXT!! Hope your feeling better after feeling black like you said on your insta post ❤️
@gabepvpz4 жыл бұрын
dont eat ur cereal
@pingu72624 жыл бұрын
Eat your cereal
@NZXTglobal4 жыл бұрын
thank u, feeling much better now 💜
@BikieMC4 жыл бұрын
NZXT also did the latest PC giveaway with the new case end? I’ve been wondering and never got an email if it ended or who won
@tigersfan84593 жыл бұрын
I just got almost all my parts for my first built pc! Tired of my pre built that’s already going slow and bad! I got this product and I’m excited
@Tanfana8304 жыл бұрын
It's Lupo, man!
@breezy23234 жыл бұрын
Finally they improved their video guides!
@harpxwx3 жыл бұрын
bro thank you, I just got it today and I just installed it. it looks absolutely amazing!
@scyther78583 жыл бұрын
Which one the z or the x series?
@teelim4 жыл бұрын
I like the Kraken Z a lot but I think the software needs to be updated to allow more display rotation options.
@robbcabaian Жыл бұрын
Yep, both orientations has wires pushing against the RAM
@OfficiallyOrca9 ай бұрын
Very informative. This video IMO is probably one the best from NZXT. Explanations in detail 👌🏽
@triv23003 жыл бұрын
The video guide doesn't show how to install it step by step, I'm watching it 20 times and still get stuck installing it, just show the guy installing it from start to finish instead of jumping to different parts of the installation video in my opinion?
@vector52014 ай бұрын
Womp womp
@tuhka162 жыл бұрын
this is the first instalation video i've seen showing how to put fan caples and aio pump caples
@PhantomMark Жыл бұрын
I have Cam installed and it seems to be working, but I see none of these controls for my Z73, the interface I see is very different to shown at 2:23 as well, confused as heck tbh
@pingu72624 жыл бұрын
When you think that you will be the first comment: 😁 When NZXT beats you to it so youre second: 😐
@NZXTglobal4 жыл бұрын
not today, pingu!
@michelinosports93634 жыл бұрын
@@NZXTglobal hey, is that feature with cpu deegree also for x52 kraken wich i bought 2018?
@Gattsu_the_struggler4 жыл бұрын
NOOT NOOT.
@RealLagu4 жыл бұрын
Noot noot! If I am going with the z63 in my next build, im going to have a pingu in my pc
@dafreakscope73424 жыл бұрын
@@RealLagu Do iitttt
@Leo-ve9xm4 жыл бұрын
I have just ordered the Z73, I am so excited!
@andrewrowland13544 жыл бұрын
I hope you've not got an Asus motherboard!!??
@Leo-ve9xm4 жыл бұрын
@@andrewrowland1354 Umm why?
@andrewrowland13544 жыл бұрын
Leo Bexause for some reason the cam software won’t connect to the lcd/water pump direct through the USB board connection if you have an asus motherboard.
@rizzy60874 жыл бұрын
Andrew Rowland u sure? I’m getting kraken z and Asus b550e
@Tostada_congelado3 жыл бұрын
X= nice looking AIO and quality Z= you hate your wallet don’t you
@NZXTglobal4 жыл бұрын
👉👈
@tylerford044 жыл бұрын
👉👈
@pingu72624 жыл бұрын
👉👈
@lilpapizk4394 жыл бұрын
👉👈
@Luxtful4 жыл бұрын
@@KFCowboy r/brokethechain
@KFCowboy4 жыл бұрын
@@lilpapizk439 👉👈
@jaykup70203 жыл бұрын
My breakout cable has a male connector with a specially shaped end to fit into something, why doesn’t this walkthrough show that?
@wnrandom983 жыл бұрын
there's no detailed information on how to connect every cable. cause there's a lot of them
@dimitritrotsiuk38974 жыл бұрын
Is there anything to dislike in this video??? Just wondering why there is dislikes under this video??? I love NZXT product!!!
@codname1252 жыл бұрын
Maybe because they inserted the cooler in the wrong orientation thus drastically reducing its lifespan
@CrzBonKerz21 Жыл бұрын
This is super fucking cool. I love how it looks like a black hole abyss with the light rings reflecting.
@Joleen213 Жыл бұрын
My Z53 is not even showing up at all on my NZXT cam software. Its only identifying the 2 rgb fan lights on the radiator and the lights on my RAM. I've been trying to display a gif on my cpu's LED display for days but I cant.
@mysticalrandomness42823 жыл бұрын
This is my dream cooler someday when I build a pc I’m getting this
@tazepsmg3 жыл бұрын
great one but the one im struggling with wasn't explained at all. The RGB connectors. I don't understand them I never did any RGB before
@ImportedAwesomeness3 жыл бұрын
You just get it all connected then you can customize through Nzxtcam
@bryanmedina2853 жыл бұрын
@@ImportedAwesomeness where do u connect RGB tho
@ImportedAwesomeness3 жыл бұрын
@@bryanmedina285 when you plug in the fans you should be good
@flamingoodness4923 Жыл бұрын
I bought this and put a gif of sonic running in as the display I absolutely love this thing
@photobeast Жыл бұрын
I really want to get this to work. I did a custom build a month ago and for 12 days straight before working after work probably 8 hours a day I tried to get my first NZXT Kraken x63 to work after almost two weeks of not being able to use my computer edit videos or pictures and frustratingly sitting at this table hurting my back. I sent it back and got another one. Unfortunately I was using Amazon and even though I was buying new ones you could blatantly see that these things were used as the thermal paste was gone and there was other signs of use as well. The second one literally after three days I couldn't get to work so I bought the RGB fan adapter. With that I actually got the crack and software to finally work and it showed up as a separate pump and fans. The first one would not do that. So I could never change any of my pump settings. I'm actually on the third one now which is the z63 and that one came used as well. But everything has been on hold for an additional two weeks because I upgraded from a i 7/10 gen CPU to and I9 11th gen CPU and I had to go through three different motherboards before we could get everything working. It was ridiculous but every motherboard would work with the 10th gen not with the 11th gen. And I have 2 separate 11th generation chips that would not work on three MSI motherboards. Even after contacting MSI they stated that there must be an error with the Z5 90s. Finally yesterday I got my 4th motherboard delivered and I actually got an 11th generation CPU to work on A Z590! And yeah I tried every troubleshooting possibility including updating bios through every BIOS version on msi's website. But that aside I finally got the computer working but now my z63 is running at 100 degrees Celsius and it says zero RPMs for the pump. So 5 weeks later I still don't have a working computer I've been through four NZXT pumps and four MSI Motherboards... I probably have $3,000 tied up and refunds right now and exchanges and then my first motherboard was $1,000 because I bought a Godlike from MSI and they're not cheap but the pins got bent with all the fumbling around for weeks and weeks and weeks... I just don't understand when stuff supposed to be compatible why it doesn't work and then there's the fact that Amazon can't send a new item when you pay for one. This build has been one of the most frustrating things I've ever done
@stefa40134 жыл бұрын
Oh man that kraken Z screen is super sick
@RobCos-io1tu2 жыл бұрын
When are you shipping out the new AM5 Bracket?
@brainbomb972 жыл бұрын
is there an extra breakout cable on the x model that doesn't plug into anything? you only used two cables from that bundle, but there are 3 on it
@gaatjenietaanprivacy50234 жыл бұрын
I really like that display, I can think of numours of idea's to add as picture or gif's on it. I also really like that mirror look and the themp. clocks. Basically one of of the reasons I started looking for these kind of RGB-waterkoolings. No longer need to keep an eye on my system for not getting to warm during hot summer days and heavy gaming. Since I am using your waterkooling I also noticed my PC has less issues and hardly needs help at hot days anymore. However one thing that doesn't make sense to me - don't get me wrong - now why in this period that RGB is coming to the PC and more and more, parts are being build with RGB, there you offer normal non-RGB vans with, while in your store you do sell them with RGB. So without the RGB-vans the Z63 is a bit overpriced if you ask me.
@Sdub976 Жыл бұрын
thanks for an installation video, now we need a fix/troubleshooting video as to why I do not have the gif option in the drop down menu on the lighting tab. i have a z63 and cam recognizes the z series. no option for gif
@bringbackwindowsphone4 жыл бұрын
I'm still frustrated that I bought the S340 Elite days before the new cases were released though it's still beautiful. NZXT ♥️
@Baka_Dev1 Жыл бұрын
Could someone help me with something...This cable titled "nzxt", should I only use it if I have an nzxt rgb accessory? Or should I connect it somewhere on the motherboard?
@zhevox4 жыл бұрын
Wait, so the X series does not have a breakout cable for the fans? So I have to connect the fans to the motherboad sys_fan headers instead?
@TheSjuris4 жыл бұрын
Yep
@horeinator4 жыл бұрын
@@TheSjuris does CAM recognize the sys_fans? Or do you only have control in BIOS?
@HaseoSpeedruns Жыл бұрын
just got the x73 2 days ago. i don't understand why the smooth default spinning effect for the kraken isn't an option in the cam software. i've tried to replicate the effect with loading and covering marquee, but it's either too laggy or too fast. are you guys gonna add it in a future update, maybe?
@austinwollitz9541 Жыл бұрын
Why does everything work perfectly except for the fans do not light up? Any fix?
@SSGFlare4 жыл бұрын
Sorry I’m a noob when it comes to pc. Are the FANS of the kraken x63 rgb
@quacks9074 жыл бұрын
No
@Squilfinator2 жыл бұрын
May be a silly question but fans only blow one way and I don't know which direction is the correct way to install the fans when mounted the fans below the radiator for a top mount (radiator touching chassis and then the fans below it). Would I want to blow air into the case or out of the case? So confused lol
@conxptexe Жыл бұрын
Set them to exhaust
@mojavecourier69877 ай бұрын
Or you know, unscrew them and turn them around lmao
@deusxo3 жыл бұрын
Help pls everything is connected and all fans are working NZXT Cam recognises my cooler however there is no display at all.
@SRJplayGAMES Жыл бұрын
You make it look easy while im struggling
@shadowkage6403 Жыл бұрын
Have u figure it out already
@confucamus35364 жыл бұрын
Radiator should be facing down on the front install no?
@PaalKiwi4 жыл бұрын
Correct, I just watched that video from Gamers Nexus about that too and how air bubbles will get trapped at the top of the loop and pull through into the pump kzbin.info/www/bejne/eJOqoKCsZp5oqc0&ab_channel=GamersNexus
@ezarelement71034 жыл бұрын
What do I need to plug the rgb control connector into. I have an x63 and a smart device on the h510 elite
@pandy83584 жыл бұрын
I have the same problem what do i do??
@ezarelement71034 жыл бұрын
PANDY 0_0 u don’t need it you just need the usb connected on the mobo and the cam software
@silence29993 жыл бұрын
Question: Is it proper too have the AIO tubes from the top, or bottom? Will it affect any type of life expectancy of the AIO if I flip the AIO so the tubes comw from the bottom?
@chille963 жыл бұрын
kzbin.info/www/bejne/enzacmqvnLl9pJI
@R3dmoon_3 жыл бұрын
Do you need thermal paste to install? This video didnt mention that so idk
@michaeljezewski77763 жыл бұрын
I got mine and it looks like it has some sort of paste on it.....but some spots have been disturbed. I think I have to remove theirs and apply grease
@austinallanson53203 жыл бұрын
Does this come with liquid already in it I’m comfused
@willobrien74343 жыл бұрын
Yeah im so confused like Idk how to put the liquid in
@andrewhokanson4986 Жыл бұрын
Is dr. lupo doing the voice over?
@Limpenitente2 жыл бұрын
Weel done but you have forgot the W_pump 3 pin cable connect. This in need to control the water pump speed
@vincentlys938 ай бұрын
I just bought a new Kraken Elite 360 and 3 days after installation, the liquid temp showing 0. Create a ticket but no respond from customer support.
@Raytenk Жыл бұрын
Do you need to refill/change the liquid coolant in Kraken?
@doqoflit96402 жыл бұрын
Usb connector have to be usb 2.0 or I can plug it into usb 3.0 as well?
@SuperGamingAli4 жыл бұрын
Do you need thermal paste?
@mitcheljanuszka3 жыл бұрын
No
@MrCrazyjoe259 Жыл бұрын
So, just to be clear, the X uses both the CPU fan header AND the aio header, and the Z only uses the AIO header and the fans are controlled via software though that splitter for the AIO?
@slappytheclown4 Жыл бұрын
So I don't get it. First time putting an aio cooler in a build and I have no idea what plugs go where due to getting it used and the cords being a jumbled mess and it has no manual. You're saying to put the 3 hole connector into the cpu fan slot? that's the only part of the cooler that connects to the mobo?
@cartman4444443 жыл бұрын
You don't need rgb header for the display on the x series right? Thst is just a lcd display and nothing more?
@Mysterious.J Жыл бұрын
I have the x52 model and my screen/rgb isn’t coming on at all. Please help!
@thesteelshot64693 жыл бұрын
When are the z series aio are coming to India
@R3DGraphiste2 жыл бұрын
Hi have a question you can add 3 more fan nzxt in the up of de ventirad
@jedijeff4 жыл бұрын
What's the difference btw the x and z version that makes Z worth considering 100 bucks top up?
@TheSjuris4 жыл бұрын
The center display is customizable to show others things besides a NZXT logo.
@possfood9963 жыл бұрын
did they use thermal paste?
@Hummus2K Жыл бұрын
im very new to pc building gonna build one tomorrow and i know its probbably a dumb question but arent u supposed to put liquid in it since its called a liqiud cooler i dont really understand but i bought one and i need some info before building how does it keep cool cause the display thing isent a fan right so how does it keep low temps compared to a build with a fan on top of the cpu? any answers will be taken with great appreciation :))
@martijnholland17143 жыл бұрын
Why on earth do you show an install with the tubes on the upperside? Air will go up which will result in more noise and less performance (the pump is trying to move air instead of water)
@BlxckFoxzz2 жыл бұрын
Can you change the fan included in the cooler?
@mrwhite98302 жыл бұрын
I am using 6 fans that are not nzxt with the x73. 3 Noctua in push-pull config. 3 Asiahorse pulling.
@BlxckFoxzz2 жыл бұрын
@@mrwhite9830 thanks!
@mattsoggy94282 жыл бұрын
Is this in/out cables used for the fans? Or does it just wire into the motherboard and don’t worry about connecting the fans to each other
@jinxy64562 жыл бұрын
did you find out i’m having this problem rn please tell me
@Trawinger4 жыл бұрын
This dude sounds like DrLupo after a few modifications to his voice.
@nucl3arboNg4 жыл бұрын
It is Lupo he's sponsored by NZXT lol
@wyatts96464 жыл бұрын
nucl3arboNg yeah he’s sponsored not an employee weird he is in this video since he’s only sponsored
@deadangel6142 Жыл бұрын
My usb cable from the pump is too small to reach the motherboard in the bottom. How can you make it the reach. I have to bring a splitter female to 4 male, but it tells me that my pcu fan speed is a detection error
@TryItWithRanch2 жыл бұрын
wouldve been nice if you specified that only the z series' angle can be changed through the program
@Absunction4 жыл бұрын
Wish they were back in stock already :(
@jawbreakerism4 жыл бұрын
They are now!! Just bought mine on Best Buy website!
@earthlinggiddy82752 жыл бұрын
3.43 You missed out where to put the 4 pin fan splitter cable and jumped straight to breakout cable
@BobCostas-db5hb9 ай бұрын
I don't get why theres so many different nzxt coolers. What's the difference between nzxt kraken vs nzxt kraken elite vs nzxt z73 vs nzxt z63 vs x73 vs x63 or x53. On amazon, it lists "NZXT Kraken 240 RGB - 240mm AIO CPU Liquid Cooler - Customizable 1.54"" Square LCD Display for Images, Performance Metrics - High-Performance Pump - 2 x F120 RGB Core Fans - White" but it doesn't list what model. So confusing
@ireneuszgrzechowiak8793 жыл бұрын
... and when is the point when you connect the primary pump connector to the Kraken? I kinda missed it... ;)
@JAWN.4 жыл бұрын
What is it about the build in this video that looks so clean?? Also, what GPU is being shown?! THE CLEANLINESS 😩👌🏼
@ExtremeMattV07104 жыл бұрын
Jawn Rocha that nzxt motherboard too 😭
@chrisjct2 жыл бұрын
So they always showing a wrong build for any water cooler AIO, having it mounted on top is bad and will end up killing itself faster than you want
@ilkaykoroglu65004 жыл бұрын
Please, come back to Turkey!
@tofujuice89504 жыл бұрын
i just bought one of these coolers this video is very helpful
@briankim96824 жыл бұрын
Do you need to use the rgb connector from the aio? or is it only for the people who are using other nzxt rgb products
@greggv82 жыл бұрын
How do I test a used Kraken X to be sure the pump works before I install it? Can it be used with only the mini USB connected and a directly powered fan on the radiator?
@BeowulfGaming3 жыл бұрын
unfortunately after 1 year, one of the fans start making loud noises and is broken, never happened to me with any other AIO liquid coolers :(
@lukefenske91113 жыл бұрын
it would be nice if some of the cables were longer and out of the box ran up with the water tube so it didn't look like 300 cables coming out of the cooling block.
@deadangel6142 Жыл бұрын
You tell me I have 10 fans I don't know how I did cable management. Also, having problems with my bios right the pump cable is too short to reach the bottom of my motherboard
@TheKnightedOne2 жыл бұрын
I installed the Kraken z73 on my HP Omen and downloaded the software, and while it works, the pc doesn’t recognize the device at all. What am I doing wrong?
@Josiuh3 жыл бұрын
Why would the manufacturer of a product install their own product incorrectly?
@__RobertM__4 жыл бұрын
why is the tubing pushing on the gpu in almost all the builds? Is it just sitting 'as is' or there is a valid scientific reason behind that I missed? :)
@nrg42853 жыл бұрын
What do you do with the 10-pin female connector? There's a 10-pin female on the X63 Kraken AIO and they didn't even show him doing anything with it.
@lastgenbenchmarks7563 жыл бұрын
so why are the fans not in the inside? almost every pc build on youtube has them installing the fans on the inside with the radiator against the bracket? whats up with this?
@sirgrundel3 жыл бұрын
ive installed this and almost everything works fine and lights up, but the RGB fans on the lights dont seem to be ligghting up when i boot the computer. Everything else works and lights up fine.
@someguy2401 Жыл бұрын
do you have to replace the kraken z with water sometimes
@Rice_RL2 жыл бұрын
Hi, I need some help. I had just installed my NZXT Kraken X63 AIO and seems to be working normally, however, when I'm using the cam software I am not able to change the Lighting because it says "No supported cooling devices were found" and "No supported lighting devices were found". Thanks!
@Mo-mh6wh4 жыл бұрын
I’m a little scared of liquid cooling, I’m about to build my first pc and am wondering do I have to add any liquid/ replace it? Thanks for any help!
@GrimmDZ4 жыл бұрын
Am too!
@nox28894 жыл бұрын
No. AIOs are set up so you never have to mess with the water inside. They are already filled. You just need to install and you are good.
@rockstarzaid194 жыл бұрын
AIOs are ready to go out of the box, you don't need to add or replace any liquid.
@wiimatt40444 жыл бұрын
it’s just as easy as an air cooler
@falid45202 жыл бұрын
I can't get the amd retention bracket on for the life of me!!!!! I've watched 4 guides and have been at it for 2 hours but it just won't click in, nor rotate into position at all. Am I doing something wrong?
@icecube2T8 Жыл бұрын
Got two two of these installed and will say! Why make such a nice pump but then I can only think cut corners with the wiring to it! Looks like the designer of the kraken didn’t get paid at the end 😂 and the office apprentice added the wiring design to the finished (prototype) of it at the end on his lunch break..😂😂😂😂
@MrNeilcatorce4 жыл бұрын
I wish there will be a bigger version of H1 that kraken z can be use.
@peterbreitenmoser38034 жыл бұрын
How about the H210i? It's still pretty small and has enough space for the Kraken.
@bradjenkins28612 жыл бұрын
OK but I didn't see you put liquid into the cooler does it come already in there? I use a Noctua air cooler and get to like 67c under load in cinebench so I don't even think I need an AIO but it seems nice
@mojavecourier69877 ай бұрын
I don't think you can ship something like this with liquid in it. They were showing everything but that part for some reason
@cameronhoessle8543 жыл бұрын
Can you install this while the motherboard is in your case or should you take it out
@PandaPandaPandaism2 жыл бұрын
Why are you showing the radiator mounted tubes facing up in this video at 3:55? Doesn't this create excess noise and added stress to the pump?
@icy_business2 жыл бұрын
as long as the pump is bellow then radiator it’s fine, refer to Jayz video on pump orientation
@PandaPandaPandaism2 жыл бұрын
@@icy_business It won't stress the pump if the the top of the circuit is higher, but it will still cause a trickling noise if it's mounted that way.
@PEANJT2 жыл бұрын
i got many questions, it is a nice product and all but i don’t know if it works with any pc, for example, the motherboard i have is the gigabyte b550 aorus elite, does it install in it?? i’m planning to buy one and use it on my gaming pc, but i’m not sure, because i don’t know if it can be installed on my gaming pc or not, if u need the full specs just reply to this comment and ask me for them.
@MrHyeqarl3 жыл бұрын
I bought this kraken z73 2 weeks ago, it was fine when I 1st use the GIF, the colors on LCD was sharp, but after 2 weeks the *colors on LCD diminished,* edit: *every light color looks like WHITE* what's the problem? my PSU? My Motherboard? My GPU? or NZXT Defect Product?