OBD2 CAN bus hacking / Opel Vectra C

[@sosotzutzy]

We need a full tutorial. I can t wait for it!!!

[@WelshWilts]

Adam, this is great work, what an excellent project. I have watched all 3 tutorial videos. Your presentation skills are very good. I followed each step and have the sniffer installed on my laptop, connected to my Arduino, connected to the OBD2 port of my Range Rover Evoque. It works very well indeed! Thank you so much, the project plus the videos/editing must have taken considerable effort. I just wanted to say how grateful I am 👍 I have like and subscribed, and hope to see more creativity from you in the near future 👏

[@adam_]

Thanks, Chris, this means a lot! Indeed, it was much much more work than I expected originally. I really want to continue but life currently doesn't allow me to spend enough time on this as I'd prefer.

[@TheRealSneakyPlayz]

Excellent Content, PLEASE provide a full tutorial. You are a great teacher and I would love to see the full tutorial. Thanks for your content.

[@miczapienio987]

For those, who are waiting for the next part, I thought of a way to find specific CAN packets by first saving as much packets as you recieve after turning the ignition, and than make arduino ignore it. Than, if I'am correct, new packet should show on the serial monitor :p

[@mateuszburek9272]

Looking forward to full series. It will keep me busy for a long time. Thanks bro!

[@TairoeuMachado]

Super well done! I just watched the tutorial videos. I need to watch two times more to get something. I can't wait to do something like that in my Fiat Stilo

[@mangopolice]

Can't wait to see your tutorial. Great work!

[@dwzd2099]

We need a full tutorial. I can t wait for it.

[@mustaphaessahihi1762]

We need more tutorial this is really brilliant. Please make some new tutorials. What an amazing work 👍

[@indrafardiansyah419]

Yaay!! Definitely waiting for the tutorial 😃

[@roboticaqueentretiene.4510]

That full tutorial would be great. Go ahead and do it. We will be looking forward to it with enthusiasm.

[@demirhanserkan]

I'm eagerly waiting for you to share the full project.

[@SadBoyJanuszKiedysToBylo]

I bought all crucial stuff from AliExpress. Now I'm waiting for awesome part 2 !

[@Marco-Polo-Campervan]

Wow, this is sooooo awsome. Please make that tutorial for us. This is what i am looking for some years.

[@adam_]

Thanks, I'm on it!

[@rb2304]

Really waiting for the tutorial. So cool to put this into my vec

[@suleymanozen3463]

I think I love you ❤️❤️❤️ thanks for the vids. Do you want to show how you install the app?

[@TradeDavidly]

Loved you're tutorials Adam, great content. The last piece of the puzzle is the app. What software did you use to create the app? Android studio. Python Buildozer...? Thanks in advance !

[@porloc]

Good job, man👍. Can you share this mobile app?

[@alexandrey3303]

Wow, with this is possible in future lcd dashboard..😁

[@NeonTheOne]

That’s awesome! That seems to be better than HLS that I use. Pls. Tell us more about your project!

[@andreienachescu9617]

Please do a tutorial i need this in my vectra🥰🥰🥰

[@DaiFuYiZheng]

Very interesting. A full tutorial would be great.

[@adam_]

there's a full tutorial, please check the description

[@IlyaZub]

Great work! Thanks for sharing 🙏

[@MrKamil0803]

Hi Adam Is it already on sale?

[@colinscrimshaw3017]

looks a great bit of kit welcome on it.

[@kapazo13]

Looking Forward For the tutorial

[@coolcarboy249]

Do you think this would be able to work on the older half can vectra Cs or just the full can. Would love to see how to set this up on my car 😍😍 already use a simple Bluetooth with tauque app to see current numbers like air temp and 02 sensor readings

[@adam_]

I'll try to give some tips for other cars in the upcoming tutorial videos. Stay tuned!

[@president_chimp]

I'm following along. This is great material. I'd love to get to the stage of sending the commands via an app on an Android HU to my GTR

[@abdoubel1985]

That's awesome, I ve been looking for such a project for my opel ASTRA-K and planned to do some sniffing on the GMLAN can bus, it would be great if you can share any information you have got so far, thanks 👍👍👍👍

[@viniciusDC92]

I wish, just watched all the videos on how to make this, but it's too much for me. I can only use arduino and relays to control what I need, but I wish I could do just this, connect a device to the obd and have it all.

[@arifpatel3014]

Hi. I'm someone who's always been into Tech and Gadgets. I love this video and appreciate what you do. Just a quick question... I have an OBD 2 (WiFi) adapter. Will I be able to do this using my OBD2 adapter or will I need to buy another adapter?

[@adam_]

With that adapter, you can do basic stuff, most likely reading the standard OBD2 value, but it will not be able to control stuff in your car.

[@ruiduartedacostamacedopere5176]

​@@adam_are you selling the obd2 hardware and software? Where can i buy it.

[@djtiner1]

You are a master!

[@dr.kim_jee7772]

Wow nice, I have vectra c and I want this

[@caglarimer]

hello, is it possible to reduce chime noise with this application ?

[@ichBINSabdiAKA]

this is awesome! can't wait to see the tutorial on this

[@kristoffekete6280]

Szia! Tudnál segiteni hogy cserelted ki a muszerfal vilagitast? Vagy esetleg csinalnal rola videot?

[@usix8820]

This is magic?! Waiting for it!

[@fabiocasu4598]

Amazing project man! ;-)

[@TheUltimate65]

I have a scantool type EML 327 , that not feet obd of 08 Vectra 1.9 cdti , have this car other type of obd2

[@pensaanteserefletir8237]

Show como eu consigo ter esse aplicativo no meu também..

[@alqasmi000]

I’m very interesting on the project. I have read and analyze my car messages but when I’m trying to send messages to the car it will show a lot of error signs on the dashboard. CAN YOU PLEASE HELP BY VIDEO TUTORIAL. THANKS.

[@bobkammoun8375]

Hi dear, great work, did you share the full tutorial any where .

[@tenereshell]

I want this app from were to get it. I have Vectra C 2,2 DTI 2003

[@timstone1744]

Hi Adam. As everyone has said, great job and thank you for sharing your work on github. I have a specific question. I know that you mention using oem diagnostic software to help you decode and execute actions on the car I. e. Open windows and such. So the question is do you always use diagnostic commands or have you executed actions using competive transmission message rates? For example, could you simulate the press of a button by posting the can message with the pressed code 2x faster than the normal message rate? The oem module will still be posting the "non-pressed" message so how do you defeat it and make the other modules think the button is pressed? I'm trying to know what strategy works best. I hope the question is clear enough. Thank you in advance.

[@didaloca]

If you look through his code, he just sends the "pressed" message onto the bus regardless.

[@alejandroperez5368]

That's a good question, I'd like to know how to turn on the car headlights when opening my Astra using the remote. I managed to send two different messages that make the low beams turn on but after some milliseconds, the car turns them off. I think there's a diagnostic message to turn them on using an OPCOM. Will have to sniff the message for that. However, sending that message when the car ignition is OFF will likely not work, even if CANBUS is awake (by opening a door or pressing the brake pedal...)

[@homerfj1100]

Updated facelift Vectra C?

[@mertcapkin7263]

How did you build the module? Is there a tutorial for it?

[@montywhisp]

Helló Ádám! Én egy Opel Astra H-t szeretnék megbütykölni. Esetleg pár kérdéssel megkereshetnélek? Arduino, és az egyéb modulok nem okoznak gondot, az Opel CAN bus-szal kapcsolatban keresnélek

[@adam_]

Rendben, írd le az email címed, és megkereslek!

[@robhuiting1041]

Hey how did you get those nice blue and white lights in the interior?

[@adam_]

I manually changed and resoldered all LEDs :)

[@HonzaVinCZ]

That blue light dash is so nice. Overall it looks so clean. That was done by replacing the default yellow/orange leds? Give me more info about that please.

[@johnconnor513]

Dude you even hacked my phone with this. When you turned the volume up mine went up too🤣🤣🤣

[@gyorgylukacs7672]

Szia ! Még foglalkozol a projekttel ? Érdekelne a leírás :D

[@alexanderschaller2030]

Great ! What commands do you send in order to let the OBD2 know to put data on the CAN pins...up to now I see nothing on pin 6 and 14 ? Using Arduino NANO and MCP2515... thanks for that great video

[@ademkalay8797]

Sistem 10 numara, harika olmuş 👍👏💯

[@ademkalay8797]

Acaba bu cihazi türkiye,de nasıl bulabilirim veya siz gönderebilirmisiniz.kaç para fiyati

[@franmesa4376]

It is incredible! I want to do this!!!

[@adam_]

I'll do a full tutorial, so maybe you can do the same soon.

[@franmesa4376]

Can add the park assist you made?

[@franmesa4376]

You know "droidoncar" proyect?

[@kayleighmcmillan4293]

hi adam i was hoping for some help, I am currently doing what you are with the canbus except I want to work lights and unlock my car, I have read the medium speed can bus and cannot get any of the can packets to work, I then read the single can bus and managed to work interior lights, cluster and radio etc but still no info on exterior lights or central locking, In fact when I operated the key while on single Bus the central locking did not work, I have keyless start I hope you can help in some way not with giving me codes but information on what is on each bus. Thanks

[@Michael-mo1lx]

Where did you get the floormats

[@nitescuilie8669]

Salut! Ce aplicatie folosești pt telefon si ce interfața folosesti pt. opel vectra c ? Se gaseste pe internet? Multumesc anticipat.

[@creativexstudio00]

Hi .How to make the same app for my car. I have android multimedia in car. I want to do install this app there.Please help me .My car is Opel Astra 1,4cc 90hp 2004 year I need from water cooler display because not have on dashboard.

[@sergiumea6574]

Hello, I also want to make such a project on a Vectra without key access............

[@ludicrous8794]

Hi What is the brand and model of the obd2 opel vectra?

[@ZulfiqarAadil]

Adam you did a good work on it whats plan for open source ?

[@JesusPerez-cu5tt]

Felicidades. Me parece un trabajo impresionante. Has hecho tu la app?

[@campingsevenler8138]

Merhaba 2004 confort vectra bu çalışma mümkün mü

[@burdiburdios9994]

Здравствуй! А где можно скачать такое приложение, оно работает с elm?

[@ruslanmusaev3549]

Елм работает по протоколу к-лайн.этот хвост работает по протоколу кан.

[@iaggocapitanio7909]

Hi, how do you make to connect the android system with the can bus?

[@molhior]

Hello, i have a question about your car audio. I'm really interested what you "put in there", by that i mean i really "love the way your speakers do", can you write me back what products you put into your car? thank you very much !

[@davidfloriasanz8249]

Buenos días Una pregunta Donde puedo conseguir la pieza que pones debajo del cenicero para menejar el coche con el mv gracias un saludo

[@luismaciasgonzalez1126]

Hola qué tipo y modelo de OBD2 es y dónde se puede comprar,gracias ,un saludo

[@Vovan660]

good evening, I am a happy owner of vectra c and I really liked your project, I reviewed all the releases, tell me if I can download such a program somewhere as in the video. Have a good day

[@zattut]

God bless you, I am confused about the OBD II. I thought they are read only. How did you manage to do it with an app? I want to do something similar to that. I wonder if built in dashcams could be activated this way. Thanks

[@williamspock2991]

Great hack! Waiting for the tutorial! How did you find the correct codes - messages for the can bus?

[@adam_]

I'll try to answer this in the upcoming video!

[@darek4359]

@@adam_ Haly. Mikor várható előre láthatóan? Egyébként brutál projekt, minden szempontból gratulálok. :)

[@adam_]

@@darek4359 Köszi :) Jövő hét!

[@darek4359]

@@adam_ Zsír várom nagyon :D

[@fsiebrand]

I’m very interested. Are you still developing this?

[@adam_]

Thanks Ferdinand! Yes, I'm working on making the module more stable and robust. For that, I need to redesign the PCB completely, so it'll take some time. But once it's finished, I'm planning to release a full video series as a tutorial.

[@zul4340]

Hol szerezheti be, és mennyibe kerül a programozás?

[@TheJelly132]

Original screen on info display?

[@nubbit4782]

Hi Adam, Thanks for sharing! Great project and I'd definitely like to see a follow up/tutorial for this! I'm trying something similar on my Vectra C but I'm having a hard time finding the correct pins for the MS-CAN bus on the OBD connector(for reading/sending AC/radio data). Can you tell me which pins on the OBD connector you are using for the different busses?

[@martynassimkus9727]

//Low Speed CAN 33.3kbps //LSCAN-H - 1 //LSCAN-L - 5 //#define SPEED CAN_95KBPS //Medium Speed CAN 95kbps //MSCAN-H - 3 //MSCAN-L - 11 //#define SPEED CAN_500KBPS //High Speed CAN 500kbps //HSCAN-H - 6 //HSCAN-L - 14

[@sejefrede1]

How did you change the the colour to blue?

[@adam_]

I changed all the LEDs everywhere.

[@bastekbastek6444]

where can I download this app?

[@scorpio7899]

Que marca y modelo es lo quiero para mi Vectra donde lo compraste

[@patrucaracaleanu3189]

Well done Adam! Unfortunately didn’t work in Range Rover Sport 2009, I changed the speed from code, I received some data but when I press a button or rolldown the window, nothing changes in the list. Have you some ideea ?

[@godnessy]

This is amazing, but if you dont know how to program to troubleshoot ALL the issues that are bound to happen along the way, dont waste your time!

[@richardtepas4832]

would like that very much !

[@Jean_1999]

How did you change the colour of the dash? Different light bulbs?

[@adam_]

different LEDs, yep

[@AndyMcGeever]

How much handbrake travel??

[@Mrkwrkt1]

Is it possible to open and close door locks without ignition on using this method ?

[@adam_]

It depends on the car. After ignition a lot of communication is shut down.

[@one_alonevanalon3458]

Can you stop the car from it? Or is it possible

[@dobredbr1514]

Hello . how did you change the lights on the board to blue?

[@adam_]

Disassembled every panel, then change the leds.

[@jayprezo7577]

Bring it on dude thats top

[@gelu07gelatina]

Hello, what is the name of the tester used? 🤔

[@kamilstefanek3117]

is this a regular receiver, e.g. elm327? and a special application for that? is it the receiver specially made by you? if this is the application itself, where and when will it be available?

[@adam_]

Hey Kamil. No, this is not an off-the-shelf OBD transciever, I used a generic CAN driver and developed everything above it. The module is also my design. I'm planning to make a complete tutorial video series about this, but it takes time. Thanks for your comment!

[@Da-ne1vv]

This is really cool

[@mustafa0rhpozitif141]

Güzel bir çalışma olmuş 👌

[@byNicat_]

Proqram adı ne?

[@davidapolinariopereira]

Very interested

[@alexnede7689]

Hi mate , can you help me with a link for Obd. From where i can order 1 of this

[@svs.snapleriw995]

Bu özelliği nasıl yapabiliriz

[@garystinten9339]

Could you add a line or two of code identifying the protocol so that these can be linked to an online database so people can look up their vehicle? Could you also add the ability to label each PID on the can bus network? Pretty please with sugar on top.. Thanks

[@adam_]

Absolutely! This will take some time, but I'll try for sure!

[@aminemaiza1935]

Are you using elm 327 connected to your smartphone via bluetooth/wifi or with your own hardware?!!!

[@kadamt86]

Ez igen! 😎

[@Toucd]

this configuration work on other Opel Vectra C too? or every time we have to configure codes again? Thanks..

[@adam_]

Unfortunately, the exact CAN messages can differ for different motor codes too (diesel vs petrol, etc...), but not significantly. If you build a system like mine, and gather some experience, you should be able to finetune the messages for a new car pretty quickly.

[@RustyHeartsTOV]

I want this too :(

[@JoeyTribbiani005]

Ez jo ez a cucc. Az obd csatija ott van neki gyárilag is vagy te rakattad át?

[@adam_]

Vectránál ott van gyárilag.