OBS Chevy - 22x11 Will They Tuck

Do you have trouble with wheel offset and backspacing like we do. Well in this video we took a $2400 gamble just to be able to answer one of the most common questions about OBS Chevy Trucks. Will My Wheels Tuck On My Truck.
More Carport Content at
linktr.ee/carp...
for more truck awesomeness check out
‪@PuddinsFabShop‬
/ @puddinsfabshop

[@kevinburnett6251]

They tuck fine on my bagged obs!!!🤷🏽‍♂️

[@Donmud]

Years ago I made one work by just shorting the axle tubes . Unless you absolutely love the wheels don’t advise . Shit ton of work and a few trashed cut parts that wouldn’t fit . But it still rolls around NJ to this day somewhere up there

[@puffintrukin4900]

Im going 22s with low profile im taking a gamble wish me luck!!!!what tire is the skinniest i can get????

[@limedime03]

I’m planning on a set of 20 x 8 set of those exact wheels on my 03 S10

[@365hotfire]

What’s the name of those wheels?

[@CarportCustoms]

US Mags Bullet in gunmetal

[@365hotfire]

@@CarportCustoms thank you

[@briankissel7661]

But an ‘03 S10 is worth less than the wheel set you’re considering.

[@everDLC9696]

22x10.5” will tuck. Check out my videos of my obs.

[@puffintrukin4900]

If bagged what size u recommend for no axle shortning but its body dropped 1993 chevrolet suburban lays frame but 8 dont know what rims to get

[@CarportCustoms]

just need to make sure the offset and backspacing is right

[@joshbeasley9423]

I'm wanting to run the torque thrust 2s 22x9 22x11 265 30 up front 295 30 in the back 4 7 drop will it clear or need to be trimmed an rolled a lot? And am I going to run into problems wanting to drive it a lot? It's also a step side.

[@CarportCustoms]

We had to trim the lips in the rear and front on these. So I’m sure you will have to do the same

[@Adamdub612]

i got the same wheels but in 10.5 inch i believe but i only paid 1685

[@fightback5373]

So that fitment would work fine bagged on a regular shortbox. Gotcha

[@CarportCustoms]

Yea with a lil work

[@jeyweb4236]

How can you end it without a full body shot with the wheels! 😂

[@puffintrukin4900]

I have 15" stock steelis, and now it rubbed the back airbag and popped it twice, in the same month i dont know wats wrong tires are 275/50/15 so they are pretty thick tires.any suggestions??

[@trev119]

Man that looks so freaking ugly idk why anyone would want that garbage on any vehicle much less a truck.

[@puffintrukin4900]

It used 2 have 22s and they fit perfectly and layed frame but i cant remember the dimensions of tire or wheel size

[@CarportCustoms]

our tire height will lay frame. its the offset and width of the wheels that are the problem

[@crestflock]

open eyes vide 👏

[@markbates2059]

So use a regular bud I Sean so many step sides not Abel to lay frame

[@CarportCustoms]

You can lay out a stepside just as ez. the width of both beds at the wheels are the same. but if your wheels are to tall you will have to raise the fenders on the stepside

[@puffintrukin4900]

The airbag sits pretty close to were you weld yours in the rear on the brown obs truk u build on ur vids i watched everyone trying to figure out my issue please help

[@CarportCustoms]

Seems to me the wheels and tires are too wide. Send me a pic

[@puffintrukin4900]

Ok were could i send u a pik would gladly love ur help and wisdom

[@CarportCustoms]

Look us up on Facebook

[@thekx450rider]

Iv always been confused why they call this a OBS I have a 83 C10 and Iv never understood the " old body style" saying. Can someone educate me on this

[@djkingpinlive]

Sure. The 88-98 trucks were an updated to a whole different platform from the c-10 you have. Your truck was the last c-10. Then, in 99, when Chevy updated the sheet metal again, everyone in the truck game started calling them “new body style” or NBS. So anything before 99 was called an “old body style” or OBS. When they updated them again in 2007, they started calling those “new new body style”, or NNBS. Which is sorta silly haha But the OBS name stuck.

[@djkingpinlive]

The 88-98 trucks really started the truck customizing craze, so those style trucks where the “starting point” for the whole truck game.

[@el_famoso_randy3648]

295/30 or 295/25 which will look better?

[@el_famoso_randy3648]

And what tire size are the front?

[@el_famoso_randy3648]

Thinking about getting 245/30 in the front

[@coltcecil5015]

What size are the rear tires on those? 295?

[@CarportCustoms]

295/30 on the rear

[@brandonayers3338]

Would that be the same clearance as a fleet side im looking at ordering the same wheels for my obs 4/8 drop

[@CarportCustoms]

yes

[@freshbutplain1144]

Thanks for the information

[@Travelwithmagalysergio]

I have the same shirt i work for Performance Contractors Inc.

[@roadsideguy5902]

As the wheel goes up it goes in so it would clear.

[@CarportCustoms]

No sir no negative camber here

[@JUICEMAN214]

DAMN THERE NICE TOO 😍

[@mccartneystuart]

C notched?

[@CarportCustoms]

Under bed cnotch

[@Alejandro1995obs]

Shorten differential

[@cody_capps]

What's the tire size on the rear?

[@CarportCustoms]

295/30

[@briankissel7661]

Who cares?

[@cody_capps]

@@briankissel7661 maybe someone running a 22x11 on the rear of a lowered obs? Just a guess.

[@isaacgarcia4841]

Nice 👍👍🇲🇽🇲🇽

[@smiley37greg]

Card carrying member of the Amish lowrider community

[@CarportCustoms]

Shoot I started the Amish Low Low Club

[@chadrios9305]

Lmao dude said "its on a static drop 4/6"🤣 far from static my guy

[@CarportCustoms]

Any drop not done with hydros or air is a static drop.

[@thethreewheelercowboy521]

What “old body style” is that.

[@chadreynolds2756]

First question should be why do I have a stepside?

[@CarportCustoms]

Because they are the sexiest

[@briankissel7661]

So you can step on the sides, duh!

[@CarportCustoms]

right lol

[@bennyboyy7]

I seriously don't understand KZbin, i hate trucks that are low like that. And no i don't go out of my way to hate on them, thats your choice to like them and im not gonna interfere. I will admit it looks nice but i prefer functionality over form. I havent even searched rims or tires or even suspension so im at a loss

[@sethtyler5515]

IMO lowering trucks is one of the stupidest things ever.

[@CarportCustoms]

Well that’s your opinion, glade we do what the customer wants at Carport Customs.

[@fortyseven1832]

Freakin clown car wheels. Anything over 18" is out of proportion on that truck.

[@CarportCustoms]

We always down to clown

[@bandit3442]

Thats just boring

[@brandonwilshire7837]

Ruin a good truck

[@CarportCustoms]

Please explain how it is ruined

[@briankissel7661]

@@CarportCustoms because it can no longer be used as a truck.

[@DEVIL666wtf]

No more rim than tire means you aint doing truck things just get the fucking Cadillac