OBS gets new kick panel speakers. (kinda)

[@Luminous.Dynamics]

Throw sound deadener on the back of these if you go this route yall. The plastic is a little thin and it wont sound as good. Especially if you place coaxials or components in them which tend to be bassy and can rattle the plastic

[@blakebrunz3423]

Looks good 👌

[@gabrielvillasenor8890]

Did you have to adjust the brake pedal so it wouldn’t hit?

[@claytonhatle.1988]

@@gabrielvillasenor8890 the e brake pedal yes

[@gabrielvillasenor8890]

Thank you !

[@gabrielvillasenor8890]

@@claytonhatle.1988how did you adjust it

[@alejandrosanchez2482]

Can u still put the parking brake or are they in the way?

[@claytonhatle.1988]

You have to bend the pedal a little and you can use the parking brake

[@geofalcon4644]

Where did u get the kick panels?

[@claytonhatle.1988]

I got them off crutchfield here’s the link to them. www.crutchfield.com/S-JGbHjB3NLwZ/p_044C1017C5/Q-Forms-Kick-Panel-Enclosures-Tan-Cashmere.html?XVINQ=GLX&awkw=75719200585&awat=pla&awnw=g&awcr=48383927785&awdv=m&awug=9020382&gclid=EAIaIQobChMIkPL-uaPm9QIVsRvUAR0atAQJEAQYAyABEgKpGvD_BwE

[@FokinMcLovin]

Can you still use the parking brake with them in or nahh?

[@claytonhatle.1988]

Yea all I did was bent it a little in towards the steering wheel, just looking at it you can’t even tell it’s bent

[@robertramirez5018]

200 each are for the pair?😊

[@claytonhatle.1988]

Pair

[@robertramirez5018]

@@claytonhatle.1988 link?

[@reneperez9125]

hello brother, could you give me the information about the speakers you used in the kick panels?

[@kyle3180]

Do your kick panels sit flush with the door rubber ?

[@claytonhatle.1988]

Yes, they sit just like the factory ones did.

[@kyle3180]

@@claytonhatle.1988 damn really I just got mine in and there is about 1/2 an inch gap

[@claytonhatle.1988]

@@kyle3180 dm on insta and show me I’ll see if some how I can help

[@anthonysalcido8700]

@@kyle3180 mine site just fine too gotta make sure they’re for your year the 88-94 are a little different then the 95-98

[@Titovlog313]

It says for 2007 and up?

[@claytonhatle.1988]

Sorry about that man here is the correct link www.crutchfield.com/p_044C100113/Q-Forms-Kick-Panel-Enclosures-Gray.html?tp=61799

[@haileynicole1496]

Loved the video!

[@marcoreyes8532]

Hey bro u got a link on those kick panels? If I don’t mind been looking for some

[@claytonhatle.1988]

www.crutchfield.com/S-kN1y30sctcx/p_044C10018/Q-Forms-Kick-Panel-Enclosures-1988-91-Tan.html?XVINQ=GLX&awkw=75647012545&awat=pla&awnw=g&awcr=47731099705&awdv=m&awug=9020382&gclid=CjwKCAjwjJmIBhA4EiwAQdCbxnjFelhibwVl5tePVi4Rqzm0g03e9qiAKbf00XY3owMPcIe-Xs4y9BoCUXgQAvD_BwE

[@marcoreyes8532]

@@claytonhatle.1988 appreciate it bro thanks

[@claytonhatle.1988]

@@marcoreyes8532 no problem man

[@camalbert4249]

Dumb question but I don’t see it on Crutchfields website, but what size tweeters are meant for these panels?

[@claytonhatle.1988]

Since you have to cute the holes out you can cute them to the size you need so I do believe you can run 0.75, 1, or 1.5 but I ran 1 inch tweeter

[@camalbert4249]

@@claytonhatle.1988 Didn’t know if there was a specific size to be ran, thanks for the help

[@claytonhatle.1988]

@@camalbert4249 no problem man

[@bossmodetubby]

@@claytonhatle.1988 oh so you can CUTE them up to 1 inch got it

[@slickrickjones]

Dude I got a 71 Nova and the kick panels I ordered are straight shit! The driver side panel won’t even allow the E brake from detracting up. Junk!

[@claytonhatle.1988]

You have to bend the pedal a little bit

[@slickrickjones]

@@claytonhatle.1988 ain’t no way man