OEM Ford F-150 Bed Extender: Long Term Review

[@rockwilliams457]

I had one on my 2012 F-150 too, and really liked it. Definitely worth the cost. Gas cans cannot roll to the front and splash around, etc...I need to find one for a 2019 F-150 now.. Thanks for sharing this..

[@adrieldiaz97]

My uncle gifted me this same one since he sold his 2019, it’s fits fine on my 2014

[@Julio-bc7pj]

thx man for the video, by the comments below it fits most f150 models and years

[@cpgeorge2518]

Seems very versatile. Maybe not as strong as the fixed aluminum version but the convenience of splitting it is nice. Since the one you bought was on a different website for half the price, is it possible to be a knock-off factory part that isn’t as strong. Good simple review 👍

[@andrew-ec9vv]

Awesome video, very informative thank you!

[@oscarvalles6053]

Make a video on how to mount the Max tracks with specifics on products you used. I was thinking of doing the same. Good looking truck and good videos.

[@NSQGarage]

I'll see what I can do!

[@Army4Runner]

Thanks for the review. Been thinking about buying one but not sure if I want to spend $3xx on a new one.

[@NSQGarage]

Maybe look at ebay. I think you can get one cheap!

[@JoshTheSonOfBethIsaacs]

Do you know where one might find those delicate plastic latch replacements? Love the vid man! There really isn't much out there about these. I have searched for these latches to no avail thus far. Thanks!

[@NSQGarage]

www.ebay.com/itm/274990727716?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=umXalTLqS4G&sssrc=2349624&ssuid=cAXxdGFgQTe&var=&widget_ver=artemis&media=COPY

[@Skotty64081]

Something I'm not really finding with these Ford extenders, how is the logistics of closing it around large cargo? Imagine sliding a big couch in the bed that the tailgate has to be open for. Would be nice to close the extender around it. But is it even possible to close the extender around it after the couch has already been loaded? And how much do they get in the way during loading? If you load the couch with the extenders collapsed, is it possible to open them? Do they need to be opened first, and then kind of hang out sticking out the back of the truck complicating the loading process? These are the things that matter.

[@NSQGarage]

Yeah that's a good question. They would kind of be difficult to use in the situation. Depending on the dimensions of the couch, you could possibly open the extender in the rearward position and pass the couch through. I don't think you could leave it collapsed and then extend, assuming that the couch goes onto the tailgate.

[@LJ0170]

I removed the 2 hinge pins on both sides. Drilled them out a little and installed one all thread on each side and put a nut on the top. I can remove the all threads. Flip it over. Re install closing sections and all threads around the couch.

[@LJ0170]

The hinges next to where it bolt onto the truck. Used it a couple times with motorcycles😊

[@martindiaz9278]

Do you know if you can find replacements for the 4 inserts that are used for the locking mechanism that allows the extender to swivel back and forth? I am thinking of getting a used one and don’t think it comes with those… are they even necessary?

[@NSQGarage]

so if you are referring to the rubber grommets that stay in the sides of the bed, I don't think you need those. if you are referring to the 2 plastic bushing that go on the "pivot bolt", I would say they are necessary. you could probably make your own with a washer and a piece of pvc. if you want me to get some dimensions for you, let me know

[@mikebennis77]

Is that a shovel mount or do you have it just tied up there

[@NSQGarage]

It's hung with quick fists

[@chriswood8703]

Did you have the spray in liner before you installed it? I’m looking to put one on my truck but the threads on bolt holes got a bit covered up when I had my spray in liner done. Will this be an issue?

[@NSQGarage]

i had to kind of peel the bed liner out of the threads. It was line-x so it was fairly easy. i imagine less rubbery bed-liners might be more of a challenge.

[@chriswood8703]

@@NSQGarage Thank you, I did take a closer look and I’m not even sure if the treads are there or if I need a tool to make some, any recommendations on what to use to peel it away?

[@NSQGarage]

@@chriswood8703 i was skeptical of having threads as well. i am pretty sure they will be there. only the center hole will have threads. i used a small pick.

[@omelturk4609]

Good Job Thank You!

[@MA-vp6op]

I wonder if that extender would work on a 2021 F-150 PowerBoost. It seems it could block access to the generator section in the bed’s sidewall.

[@NSQGarage]

Good point. When I did a quick Google. It looks like they went for a simpler design for the 2021

[@jamesrobertson7396]

wonder if this version would fit my 2018

[@NSQGarage]

Hmmm I'm really not sure. I haven't ever looked closely into the bed of the newer trucks. If you have the 3 holes on each side, maybe!

[@matthewswearingen5042]

Does the extender block the ratchet strap hooks in the back of the bed?

[@NSQGarage]

Unfortunately it does get in the way. I can still use them but I am forced to put pressure on the extender

[@thomasdonner2495]

What size are the bolts that connect the extender to the bed of the truck

[@NSQGarage]

Hmm I'm not sure. The torx bolts came with it. I'm assuming you are missing hardware? Want me to take some measurements for you?

[@brianguest5622]

Could you tell me how much room/dimensions are on the inside of that

[@NSQGarage]

i would be happy to. could you be more specific what dimensions you want? across between the two sides? collapsed or not?

[@DavidPerez-fr1hb]

Would this work with my 2021?

[@NSQGarage]

I'm sure they make something similar for your model year

[@brokerscottmickelson]

What are you using for your shovel mount?

[@NSQGarage]

Quick fists!

[@cgasu0311]

Did you install it yourself? What was involved in the install?

[@NSQGarage]

There is a single bolt that screw into the threaded holes on each side of the bed. 5 min install

[@cgasu0311]

@@NSQGarage I think I have to tap mine which isn't a big deal (11mm tap). How do you like the overall construction, durability of it? Thank you kindly for your help.

[@NSQGarage]

@@cgasu0311 it is pretty rugged. I mean it would crumple if you got rear ended, but I feel like I could stand on it and have no problems

[@cgasu0311]

@@NSQGarage Thank you for all your help! Have a great holiday!

[@NSQGarage]

@@cgasu0311 you as well!

[@thomasdonner2495]

What bolt secures the extender to the bed

[@acewentworth]

t50 torx bolt

[@superdrew8564]

What the hell does the centre bolt screw into on each side?

[@NSQGarage]

These trucks all have threads that are welded into the side of the bed right there

[@superdrew8564]

@@NSQGarage mine doesnt

[@Netojogamuito]

Pickup explorer

[@edubya9230]

Did you just say these are between 3 and 4 hundred - well, FORD has taken a different stance on this set of plastic, $850. what a load of crap.

[@NSQGarage]

Wow. That's crazy. Did you try online?