Offset bend

[@forreal8704]

That was the most simple informative video I’ve seen on KZbin. Straight to the point. Thanks Paul

[@PAULOatham]

Thanks. Youre very welcome

[@richardlane5417]

I am new to this as im working on a career change. I think this is the best explanation i have seen and watched. Thanks

[@PAULOatham]

Hi Richard. Thanks very much. I wish you every success in your new career…

[@marktroy5474]

Can’t believe when I thought I’d touch up on my offsets, I find a video from my tutor who taught it to me in the flesh 11 years ago. Thank you so much Paul, I hope you’re well & cheers for everything, from PSD to life skills to plumbing skills. Eternally grateful 🙏🏼

[@wgj4813]

After several other videos your close up told me what i wanted to know very many thanks.

[@PAULOatham]

Glad it helped!

[@shaunowens1798]

By far the best offset video I've seen! Thank you

[@cerealkiller4248]

Even though I can bend pipe accurately, I like to see how others do it too. This video is gold for beginners, to the point, short and well explained. 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿👍

[@Mad4plumbing-ltd]

Just reading up on offset bends! Thank you for explaining things nice a clearly...........

[@timwyld573]

Top little video when you are having a blonde moment and can't remember what to do. Cheers Paul

[@david-ky7rt]

Nice one Paul. Thank you.

[@waynenixon729]

Hi Paul, Great explanation and demo... But.. This method works to find the center of the bend by placing the center of the cross where the guide and former touch and pull a 45 degree angle. But what if you pulled a 30 degree bend.? To place a mark in the center of the bend would require a sliding ruler protractor set to the required angle, placed on the top edge of the former touching at two points and the center of the bend would be where the sliding ruler changes direction. This would be nearer the stop if it was a 30 degree angle pulled. Could you do more pipe bending videos please maybe using a sliding rule protractor. The cranked passove, your method made it look easy! Thank you.

[@PAULOatham]

Thanks. It’s not the angle that is important, it’s the distance between the two points, I could pull the bend at a different angle but still would need to find centres

[@rommelfoster1340]

Thanks Paul very informative!

[@darrengilliver4205]

is it possible to do a 20mm offset bend? It all gets very difficult to fit it into the bender etc

[@maggieyang8730]

Where to buy this tool?

[@PAULOatham]

www.screwfix.com/p/irwin-hilmor-lever-pipe-bender-15-22mm/63880?kpid=63880&cm_mmc=Google-_-Datafeed-_-Tools?kpid=KINASEKPID&cm_mmc=Google-_-TOKEN1-_-TOKEN2&gad_source=1&gclid=CjwKCAiA29auBhBxEiwAnKcSqo2lydeugreGwwucgN6AysnJyhEGxSGhFAzl2q6IbMTxTGEVgCvejhoC6BgQAvD_BwE&gclsrc=aw.ds

[@maggieyang8730]

Thanks. Do you ship to usa?

[@chedhughes1998]

What brand of pipe benders is that

[@PAULOatham]

Hello. They’re Hilmor pipe benders

[@taitlawrence]

When do you have to factor in the stretch ?

[@ZubairAli-tb1tx]

YOU SIR ARE A LEGEND !!

[@mariuszm693]

Many thanks this is really helpful.

[@SoburinMuhandae]

Excellent video. I can use this for my apprentices.

[@daleprosser350]

On the second bend you say to insert the pipe until your mark has disappeared but photo you showed had the mark touching the former. Is the mark supposed to be visible or not?

[@daleprosser350]

PAUL Oatham ok thank you

[@rahatzafar]

Best example

[@PAULOatham]

Thanks and good luck

[@umark6695]

Nice video. I'm use an Irwin Hilmor too and a pencil but that cross technique doesn't work for me for some reason. The cross never seems to hit the centre of the bend?

[@umark6695]

@@PAULOatham Thanks. I'll try that. Keep up the good work

[@davidlonergan7295]

So is the 50 mm measurement determined by the angle you pull?

[@davidlonergan7295]

Sorry , stupid question, it isn't 😁

[@davidlonergan7295]

@@PAULOatham Hi Paul , just wanted to know the first cross mark on first bend, how do line up the marks with the guide ? The vertical line has to line up with where? I'm guessing the horizontal line lines up to the degree you are bending to?

[@ekramrazaq7883]

Jesus this is so much more easy where are you based I want to buy you a pint

[@gardenstatestacker1879]

name of bender please

[@PAULOatham]

Hilmor. A UK brand?

[@frankiemoore9127]

Thankyou. Well explained

[@Displays.1234.]

Any chance you can tell me what type of pipe benders are these and where they come from...

[@sweetvuvuzela4634]

Hilmors screwfix uk sell them

[@prostreet999]

Na na na amigo pull your kick find a wall run it flush from the fist kick get the tape out against the wall, to the flipping mm go back 7.5mm. Bang there's yer center, boays aren't running about with scale rules these days, yer gain rapeedo speedo 🙌🏻 but here! Keep posting big guy your way of bending has been the closest to mine and I know people do it different but I could rant about how your handy bender should be treated like a sacred bond and when it sees you eyeballing a prime piece of copper 90° up it knows to let you see that incy mark dissappear then ye pull that beauty hold it up, like Alba winning the world Cup to witness a thing a rare beauty or if yer pulling a kick look down it it like a Swiss sniper and his scope till ye don't see yer mark then BANG. Ye jolt it next thing ye know yeve got the perfect flipping kick 👌 😉

[@REDMAX123456]

I just bent my first pipe 👍

[@PAULOatham]

Hey awesome! The best of luck in your career

[@timmclean-inglis9371]

Double off set !