OH MY.. what is this? Split cup with, vinyl, glitter, MOOD PAINT, epoxy, and 3d elements.

This is design took me out of my comfort zone, but I am sure glad that I did it. This is a glitter, vinyl half split, with 3d effects, and color changing (mood) paint. I think this turned out great. Not all things are mentioned in this video, but all things are listed below. There were many things I did on this tumbler that I have not completed to this extent before. This project has a lot of items used; Most if not all of the simple Items used during the creation of this tumbler, I will not post links. However, I will list where they came from. The epoxy I use will be tack free in about 4-5 hours in a 75 Degree. Because it was so cold here during the time I was doing this cup I had my room at about 80 degrees so it set a little faster. The whole time I was working on this cup it was about 40 degrees outside and humidity was about 60 Percent. This higher temp and, epoxy I used worked really well for this application.
The items I used on this is listed below with the links to the more unusual items.
I hope you enjoy this. I enjoy making tumblers that come together with ease. This tumbler is a little more complex than my other ones I have made. Until next time keep creating.
#hoggtumblers
#epoxyresin
#tumblers
#glitter
#craftythrivin
Hogg 30oz straight
thestainlessde...
Stick and restick glue (from Joann's)
following is from Walmart:
blue painters' tape
parchment paper
paint brush.
B6000
Black spray paint
glitter junkiez (pink Epiphyllum) this is a Facebook glitter that I got from someone else not sure of the site. (all I did was pick a glitter that closely matched a color in the vinyl)
Solar color dust (mood changing paint)
solarcolordust...
flower molds.
craftythrivin....
Gold foil:
shop.artisticp...
amazon:
nail tape.
washi tape
Crystalac Grande' finale 2.0:
thecrystalacst...
Vinyl :
craftythrivin....
Amazing Quick Coat:
www.walmart.co...
A little information about this is Mixing ratio is 1:1
Work time 20-25 minutes @75 degrees
Tack free time 4-5 hr. @ 75 degrees
Full cure 3-5 days @ 75 degrees
KS RESIN (VAMPIRE BLOOD) EPOXY DIE
www.ksresin.co...