OH32X02 test drive

As promised on my last video, I managed to take this little beast out for a test drive and at first I was a little underwhelmed by its lack of stability. But after adding some heavier wheels…… just wow!!! It’s a different story all together now. It is a wicked truck and I can’t wait to get racing against other people.

[@foxracerdrew]

I'm impressed, it doesn't look squirrely for a RWD and looks pretty planted, moreso with the weighted wheels. I was already planning on getting one, just got to wait on Cem.

[@grumpygrandpa3640]

In the words of Mr Clarkson NEEDS MORE POWER 😂. Brushless conversion time

[@braelighty6212]

Furitek has an 8000kv motor for this

[@martianmcfly]

Loving the different wheels! I really need to get my 1.32 baja going now and give you some competition :p

[@mikesmancave5505]

Hell’s yeah dude! We gotta put fpv in it next 🤟😎

[@angelmoreta5687]

Gracias por el video. Yo estoy esperando el mío, ya está en mi país y según el track de envio me llega en 2 días.

[@bachirbattache2997]

Thanks for the video🙏😎, i will wait for the 4WD or a kit for that 👍

[@Chip.hazard]

I dont think they will release a 4wd version, for this size 2wd seem to be perfect. Good for drift and jump , like the real truck. Plus you dont want the front to be heavier...

[@bachirbattache2997]

@@Chip.hazard i thought that the real one is 4wd, ok than let’s see 👍

[@Chip.hazard]

@@bachirbattache2997 sure you have 4wd one but on pavement race these super stadium truck are 2wd, i think these small rc will be really fun on indoor carpet track with jump :D

[@akura2]

I got one of these about three weeks ago, but the wife didn’t allow me to open it until after Christmas… lol… where did you get the alloy wheels from and are they real beadlocks (real beadlocks are available but I don’t know if these are them) also… did you put weight in the spare wheels or the gas can? It’s suggested in the manual, and I added tungsten putty to the gas can and it made a world of difference to the stance… thx

[@romper4444]

Add some weight to body to get that scale driving experience!

[@tarantula-man]

impressive how it runs at this small size

[@josephcassidy1211]

You should see the old losi 1/36

[@Br0rB]

That thing looks so freaking awesome. I think I need one, once I've built the couple Orlandoos I have that are still in the box. I wonder how much faster it would be with a Furitek system in there. :D

[@mikesmancave5505]

Would be rapid with that in it 😮

[@Br0rB]

@@mikesmancave5505 Brushless is awesome like that. Pretty pricey, unfortunately. Will need to keep playing the lottery, I reckon, and hope for the best. 🤣 And I've changed my mind, I no longer think I need one, I know I do. Especially after seeing the jumps at the end. Imagine building a dirt track in the kids sandbox and have races with a few of these. Would be so much fun.

[@mikesmancave5505]

@@Br0rB my only concern with going brushless would be the stresses on the tiny gears in the axle🤔. Wonder how they would last before stripping?

[@Br0rB]

@@mikesmancave5505 Fair point. I know you can get tougher steel gears for the other Orlandoos, at least the straight axle ones. I guess this, being rear wheel drive, uses the same type of gears. If so, steel gears would maybe help with that.

[@akura2]

What battery did you put in it? I have one, but I’d like to know a baseline Mah, size, weight to look for

[@tonycaudill4750]

I ordered the aluminum bead-lock rims for mine; very impressive machining but I can’t get the outer rings to grip the inner lip of the tire. Have you tried this upgrade yet?? AMAZING Truck Tough 😃

[@mikesmancave5505]

Yeah I still found them popping off so now I glue them. Check out this video The cleanest way to glue your tires on kzbin.info/www/bejne/qKPLf3uIqLSWhdE

[@stevestonrcguy5393]

Great little truck, how much is the entire set-up as seen? Thx 👍

[@mikesmancave5505]

I think it’s about £150. Have you seen the fpv upgrade video I made with this little truck? Think you’ll like it😉. Thanks for watching 🤟😎

[@stevestonrcguy5393]

@@mikesmancave5505 will have to watch, the little desert racer looks like a mini version of my Traxxas UDR 💪👍

[@theleadfootgunner6804]

What is the link for a complete kit?

[@maciejajewski]

can you get actual oil filled shocks for this ?

[@tonycaudill4750]

No but you can get aluminum upgraded shocks. The dampeners have internal springs in them. These models are actually dual shock

[@angelmoreta5687]

Ya he montado el mío. Con el motor N30 3000rpm hace caballitos/ whillie!

[@NanoSkyWalker]

have you broken any part so far? is there any weak point? like the center piece of the 4x4s?

[@mikesmancave5505]

So far I managed to break the driveshaft and steering knuckles. Also lots of servos, that was before I fitted the servo saver. But in all seriousness it did well for the punishment I gave it. 😎

[@NanoSkyWalker]

@@mikesmancave5505 thanks then I think I will get one and put a gyro on it to also drift a little

[@GiaBaoNguyen-hb6wg]

what motor do you use

[@mikesmancave5505]

3000rpm n20. You can use a n30 too

[@josephhobbs3009]

Global watch several videos no send me a link in the comment return please!