OHIO STEEL LAWN SWEEPER / LEAF COLLECTOR! | Top Quality Pull Behind For Yard Tractor / Lawn Mower

Рет қаралды 74,137

Күн бұрын

Пікірлер: 58

@mikedunn7795 3 ай бұрын

I live in the city,and inherited a push sweeper from dad. The thing is about 65 years old,and still picks leaves up well. Saves a *lot* of time in the fall. The only problem is the catcher fills up in one pass if you put off leaf removal too long. I throw a large tarp on the lawn,and have found it is best to just flip the whole sweeper upside down on the tarp when emptying it. Glad to see Ollie is still enjoying life!

@NewMoonRanch 3 ай бұрын

That’s a brilliant idear! And thanks for the kind words for Ollie! 🐕

@brianm7402 Жыл бұрын

What a beautiful piece of property. Your views are amazing! Thanks for the review. I'm considering buying one.

@superchuck80 2 жыл бұрын

Your dog reminds me of my grandparents dog Buck .. he lost one of his back legs from a school bus hitting him. He was still the happiest dog running through my grandparents field at their ranch. I just picked up a yard sweeper as well and they are a huge time saver. Looking at leaf shredders now. 👍

@NewMoonRanch 2 жыл бұрын

Oh heck yah! And yep, poor Ollie got hit by a car. We’re glad to have him still and I’ll bet he’ll live a long healthy life still! He’s just about 4 and he’s as happy still as ever!

@TheScooterClown 5 ай бұрын

I have a "Ohio Steel Sweeper 42" " If you level the bag where it almost scrapes the ground it will work alot better......... I had to play with my hitch to get it just right....... over 10 yrs old and still working............. The Company has a Top Notched Customer Service Department.

@NewMoonRanch 5 ай бұрын

Awesome!

@mikelunsford7462 Жыл бұрын

I love the 42-in I was just got but it's made different it doesn't have that lower and upper height adjustment other than that it looks similar it didn't have that pin that you were talking about that slips out either. My only question is is can you change the brushes and how easy is it or how hard is it. Because I'm going to be going through some brushes it looks like. Well one day I ran over a water hose I didn't see and it wrapped all up inside the unit and another day I went over some sticks and they were all stopped up inside my brushes area. But I'm in an area where I have feet of leaves and this thing is knocking them out. I don't have anything bad to say about this machine it really works great for me. I just know don't let it completely fill up or you're just blowing leaves out of it. But I usually get four baskets full in a hour . Just want to know if I can change the brushes out

@deere1485 Жыл бұрын

I've been through 3 of these so far (agfab, ohio steel, and third brand I don't recall). (1) Unfortunately all manufacturers switched from metal to metal gears to plastic to metal (check the inside of a drive wheel). Metal teeth on the small drive shaft wear down plastic teeth on the drive wheel. I get one season at best before they no longer spin. I've tried to reengineer with metal gears, but not enough time lately; (2) Catcher fabric is very thin, one maybe two seasons and its time to replace, I rebuilt the catcher from scrape aluminum and it works FAR BETTER; (3) wheels don't have adequate bite/grip, and often times I turn around to find wheels sliding across grass, not spinning and driving the leaf brushes like they are supposed too; and (4) nylon leaf brushes wear out quickly if/when run across your driveway. I'm still hoping someone engineers something using the same concept, but instead of all the plastic, its made from steel including metal tines instead of nylon, attaches to front loader bucket, and runs off PTO or hydraulics. Of course, that would cost $10,000.

@andrewbratos6907 9 ай бұрын

Its really nice when your deck has a rear discharge

@smartassist9700 Жыл бұрын

Did you go look at various lawn sweepers (in person) to compare various parts of the sweeper unit? Brush brissel difference? Overall frame size strength, warranties, etc?

@NewMoonRanch Жыл бұрын

I did take a quick glance at a few others. Not enough I can offer you a good comparison. And my memory has faded, it’s been a while.

@mikenewton2563 Жыл бұрын

You ever use the offset? Probably going to to buy one tomorrow and the offset seems like a good option. Just curious if it actually works ok or if it twist up the frame. Seems like it would need an additional support. Anyway let me know. Thanks!

@NewMoonRanch Жыл бұрын

I’ve never tried offset. Works great as is for me!

@Keyboardletters Жыл бұрын

How would it do if I just wanted to buy and use for getting up small sticks/twigs you think??

@NewMoonRanch Жыл бұрын

It would probably handle twigs up to 3/8” diameter, if they’re short enough to get in the hopper!

@Haus_of_Klaus 3 ай бұрын

Nice cruisers!

@NewMoonRanch 3 ай бұрын

Thanks! Check out my Adventure Teq channel for all that Toyota content! 🙌🏻

@truckerray7533 2 жыл бұрын

Yes, use that rope to dump the bag while on your tractor. It sure beats getting on n off. . . . unless ya have some heavy grass, then ya have to get off & hand dump. You could probably put on some "caster wheels" on the back if ya dont want / or ya find the bottom of the bagd ragging close to the ground. I did that 30 yrs ago with an old pull behind lawn sweeper my gramma had. worked really great. I pull my 48" Sears Craftsmen lawn sweeper behind my John Deere 1025R. ya dont even know the thing is there until ya look over ya shoulder, lol. Tractor safe, bud🚜😎👍🏼

@NewMoonRanch 2 жыл бұрын

Awesome! I’d like to see that setup! 🙌🏻

@truckerray7533 2 жыл бұрын

@@NewMoonRanch I havent put any caster wheels on my sears craftsmen lawn sweeper. But oh. . . . .I've thought about it a time or 3, lol🤣🤣🤣. I don't really have a problem with the rear bottom section of the bag dragging the ground. . . .but like i said. . . .ive thought bout it a time or 3. Maybe a good afternoon winter project this cold season👍🏼

@williamcoffman7149 Жыл бұрын

hey there, im here in utah as well. where did you purchase your lawn sweeper at? im here in stansbury park and been wanting to get for my big lawn...

@NewMoonRanch Жыл бұрын

Howdy! I got this one at the Morgan TSC. I’ve seen them at other Tractor Supply Co.’s.

@Frank-qr3bl 7 ай бұрын

How much weight will that thing handle? I’m thinking about buying one for hay on my little farm

@NewMoonRanch 7 ай бұрын

Hi! I’d say this one is pretty sturdy. When full of grass it hasn’t had any difficulty. Structurally that is. The part you might concern yourself with is the base fabric/plastic and stitching. The more it has to drag across the surface of your yard or terrain, bearing more weight, it might not last as long as you’d like. If you can, go down and see one in person before buying. 👍🏻

@Frank-qr3bl 7 ай бұрын

@@NewMoonRanch it actually looks like it would be fairly easy to put a skid plate under the bag

@angelreyes78501 Жыл бұрын

Que bien se siente estrenar

@grantparnes Жыл бұрын

Ohio Steel make 2 different 50 inch. Any clue what the difference is other than on can be pulled offset?

@NewMoonRanch Жыл бұрын

I don’t know either. Sorry.

@georget7709 Жыл бұрын

From researching they are the same except as you stated, the T style drawbar can be pulled offset and the Triangle drawbar can’t. T style is V2 and Triangle drawbar is V1. I am going to get me one this weekend and I have been doing some serious research haha. This is the one!!!!

@GarageGuru 8 ай бұрын

Do you think it would it pick up pine cones ?

@NewMoonRanch 8 ай бұрын

It should pick up small and regular sized pine cones. Giant pine cones, or a lawn covered in tons of them might be a challenge.

@srflow2 8 ай бұрын

After a years use. Are you still happy with it?

@NewMoonRanch 8 ай бұрын

I sure am! Works great still. Super solid. I don’t use it super heavily, a few cleanups in the fall time. But it works well and I’m super happy with it! Just wish it was John Deere green! 😛 JD does make them, which I see for sale used in the $200-400 range. But this one is probably just as well built as those.

@srflow2 8 ай бұрын

@@NewMoonRanch Thanks for the response! I’m having one delivered tomorrow 😊

@nathanbrunner6026 2 жыл бұрын

DO YOU STILL HAVE THAT OLD JOHN DEERE 140 TRACTOR ?

@NewMoonRanch 2 жыл бұрын

YES!! I just got it a month ago! It’s “new” to me and I’ll probably never get rid of it!

@pacquetman Жыл бұрын

@@NewMoonRanch It's a nice one! I've got two I need to get running!

@adina6378 Жыл бұрын

I'm not sure what she said, but she didn't look to thrilled lol 😅

@Jojohammer72 Жыл бұрын

You need to get some needle bearing for that steering my guy.

@NewMoonRanch Жыл бұрын

I did that over winter. Unfortunately it didn’t make much difference with the weight of that front snow blade. But summer time it’s been nice!

@jonquis07 Жыл бұрын

Having to pull that rope sucks. It's very heavy and sitting doesn't give too much leverage. Most of the time I have to get off. It doesn't handle sharper turns well. Also mine drags in the back so it's worn. I've had it for years so I guess that's expected

@NewMoonRanch Жыл бұрын

👍🏻