I used my oil pressure gauge to determine that i should stop using a 30weight oil. And as the oil wears it loses viscosity and you can see that in the gauge. I use the oil temp gauge to tell me when I can start having fun and stop having fun. Start having fun around 180 and call it quits around 250. 14-15psi at raised idle with 200 degree oil temp...5w40 oil...73k miles so far so good. Forged internals
@MatlasDI Жыл бұрын
Love that. Exactly as it should be 👌👌 fine adjustments until it's all perfect.
@vincentvarela7610 Жыл бұрын
Didn’t even know I needed this video, I learned hella! Excited for this series 🔥
@MatlasDI Жыл бұрын
Heck yeah dude 👌 going to keep noting down things people ask and make more and more of these
@lumberchrisr Жыл бұрын
Well done Matt some great details
@MatlasDI Жыл бұрын
Appreciate it man 🙏
@BlackestBeard Жыл бұрын
Hey @donutmedia , you taking notes?
@MatlasDI Жыл бұрын
🤣🤣 have to teach some classes
@paulmarsdensr1095 Жыл бұрын
A great video brother. Alot of great troubleshooting and learning tools in this video. Merry Christmas and happy new year to you and your family brother 😀. On our way to the Dominican Republic Thursday night. Punta Cana. Paradise awaits. Stay safe and warm. 🤪
@MatlasDI Жыл бұрын
Thank you Paul, enjoy your trip and happy holidays to you all as well 😊
@elleote2 Жыл бұрын
Yo Matt this vid was on point. Just installed a oil press gauge on the ej20 after watching you and have learnt a shed load from this vid. Ted talk your thing ma man!
@MatlasDI Жыл бұрын
Thanks dude! plan to continue to do more videos like this in the future 👌 much appreciated 🙏🙏
@aaroncates7924 Жыл бұрын
Thank you, that was a really good explanation of how it works. I learned a lot from it. Not just that I have to try peach O’s either. I have had my oil temp gauge up for awhile and now I can actually discern what it means. Thanks
@MatlasDI Жыл бұрын
Thanks Aaron 🙏 and yes, peach o's make the world go 'round 👌
@daltdalt241 Жыл бұрын
This was my favorite style of video you've done, great job! Kinda looked goofy scooting out at the end tho lmao
@MatlasDI Жыл бұрын
Thanks bro 👌 I really thought I'd get out of frame a little faster 🤣🤣
@omialmanza1900 Жыл бұрын
🤔Great video Matt honestly appreciate this. You literally just took me back to school with this one👍🏼🌟🌟🌟🌟🌟.
@MatlasDI Жыл бұрын
Thanks Omi, figured we'd make some learning content and mix things up 👌
@kilynhan2559 Жыл бұрын
Debating on getting an oil pressure gauge 🤓 nice video! Keep it flowing 🔥
@MatlasDI Жыл бұрын
Definitely a great thing to have. Thanks, man 👌
@kilynhan2559 Жыл бұрын
@@MatlasDI next video you should do pro/con on running negative camber for daily drive🤓 just some ideas haha
@MatlasDI Жыл бұрын
@Kily Nhan Should have some suspension stuff coming up, so I'll be touching base on things 👍
@4CountDaddy Жыл бұрын
great info man, best vid yet
@MatlasDI Жыл бұрын
Thanks man 🙏
@Mach5sun4 ай бұрын
I'm very interested in oil pressure. I always put a gauge on my modded cars. My 98 TJ Jeep with 200,000 miles makes like 8 psi at idle but it's been like that for years. My sandwich plate style (planning to move it) AEM gauge on my "stage 3" EJ205 in my 05 WRX was reading 10-11 psi at idle with 5w-30. It's also been making a rattle at part throttle between 2500 and 3500 rpms lately after some flogging on the dyno. So I cut open my oil filter, found copper shavings, put Rotella T6 in it, and buttoned it back up. For comparison. now I'm getting 12-13 psi at idle, 50 psi cruising at 65 in 5th on the highway, and 95 psi at cold startup. I never lug the engine but she's obviously had too many high mileage beatings. I have a JDM EJ205 on the way. I've still been driving it but plan to swap it before it grinds itself apart. What pressures are you seeing for comparison?
@kevinz06818 күн бұрын
Everything I’ve read and seen on here they say rule of thumb is around 10 psi to 1000 rpm’s. But I’m running 454 big block, at idle hot around 190 temp is about 10 psi at 900 rpm in gear at a light.
@Khaki_wrx Жыл бұрын
This helps a lot man!
@MatlasDI Жыл бұрын
Yup yupp 👌👌
@johnflood4910 Жыл бұрын
I used a bypass filter in my Ram ecodiesel and went 175,000 miles no issues I like bypass filters that clean at 1 micron. I have a 2022 Ram 1500 5.7 Hemi 4X4 3:21 rear diff. Stock OEM oil filter cold idle 47psi hot idle 35psi Cruzing speed 70MPH hot 45psi 6,000 RPM's 57psi, K&P Engineering S17 model full flow 30 micron mesh filter same numbers as stock OEM filter. My current combination filter I just installed is a Trasko full flow/bypass filter Model RK-20s designed with a 10-micron mesh filter for full flow valve rated for 3 gallons per minute and 1 micron rated for 1 gallon per minute in bypass media within the same housing with this filter at cold idle I'm at 40 Psi hot idle 29psi cruising speed 70MPH 35psi at 70MPH full pedal 6,000 rpm I'm at 37psi very little change I called the MFG he said this is good now the valve is regulating the oil pressure properly. I spoke to Blackstone they said 20-70psi is the safe zone. Matt, you know a lot about oil pressure just wanted your opinion on steady oil pressure from 1500 RPM's to 6,000 RPM's with only 2 psi difference in oil pressure do you see this as a positive or should I be concerned and do more research FYI I'm getting an oil analysis as well. I would greatly appreciate your opinion thank you in advance.
@MatlasDI Жыл бұрын
With the way you've described your setup, I don't think you have anything to worry about. There are a lot more oil galleys and things on that hemi than a 4 cylinder, and the regulators put in place likely keep it at a more steady rate for proper bearing load. You've done some really good research into it on your own as well 👌
@johnflood4910 Жыл бұрын
@@MatlasDI Thank you, This morning I changed back to K&P S17 full flow same as stock I will be switching back to Trasko being I get better flow I should be able to lower the oil temp like you said more pressure higher heat lower pressure more flow lower heat thanks for your responce.
@Mike_44 Жыл бұрын
Awesome content Mat. Your videos/channel is getting better and better.. I will finally be firing up my 2.0L ej20x motor next week after 4 months of work, but I'm waiting for a direct read oil pressure gauge that should arrive soon. What should be the oil pressure values I should look for at startup to know things are going ok with the swap I did? btw.. I never took the engine apart, just did a leak down test on it (it passed) and then I installed the long block on my '05 OBXT. nevermind bro. you mentioned it at 5:10.. lol
@MatlasDI Жыл бұрын
Thanks Mike 👌 and best of luck with the engine 👍
@Telesko Жыл бұрын
good info! I'm going to install an oil pressure gauge and wouldn't put it passed me to start freaking out when my oil pressure drops after the engine warms up.
@MatlasDI Жыл бұрын
They fluctuate a lot and can catch people off guard 👌 appreciate it man 🙏
@matthewwain9958 Жыл бұрын
STiLL annoyed the STi doesn't come with an oil-temp and oil-pressure gauge. lol.
@MatlasDI Жыл бұрын
Yeah, they're pretty essential on any performance vehicle.
@ChristopherFranz Жыл бұрын
No PRESSURE to respond but, is this relevant to just Petrol/Ethanol engines or do all the principles apply to Diesel as well? Great info as always!
@MatlasDI Жыл бұрын
Haha I see what you did there 😉 Diesel engines will have very similar values, I believe iirc that they run looser tolerances, which is why they call for thicker oil, etc. But on average diesels run somewhere between 30-70 from what I've seen.
@ChristopherFranz Жыл бұрын
@@MatlasDI Thanks 🙂
@franco8049 Жыл бұрын
I get 90psi on cold start, 20psi on warm idle and 80psi on throttle. 312,000km on the original motor (LGT wagon)
@MatlasDI Жыл бұрын
Very similar numbers to what I see on a relatively fresh build. All sounds healthy 👌
@franco8049 Жыл бұрын
@@MatlasDI hope so. Where can I send you some pics of the super wagon 🇨🇦🤣
@MatlasDI Жыл бұрын
@@franco8049 check out the discord if you aren't in there or dm me in insta 👌👌
@user-fg1io8jc3v6 ай бұрын
My oring on the oil pump is old and not selling,so the pump is plowing oil on the sump,can this plow oil out of the dipstick
@heruhadianmudjenan71262 ай бұрын
How if oil pressure stay in let say 70 psi in all rpm range...?
@lgt304 Жыл бұрын
What are your thoughts on running the oil cooler at the 1st start ups vs not till later on after break in to prevent bearing / break in particles to stay in oil cooler and possible coming out when raising boost and load into motor ? I have a brand new oil cooler for my new build . Just thought about that for some reason .
@MatlasDI Жыл бұрын
I wouldn't worry about it, as the more intricate part of the oil cooler is post filtration. Oil filter would catch any particles that could be an issue during break in. Just make sure to change the oil and filter after initial break in and you should be fine. 👌
@shaunparton1209 Жыл бұрын
Opinion on using the rear oil galley plug for oil pressure sensor? I used this one as I kept the standard subaru pressure switch and just wondering if it would read any different from this location?
@MatlasDI Жыл бұрын
Further away from the pump so it may not be quite as accurate (haven't tested side by side to know for sure) but from what I've seen it works fine, we normally use it for oil temp, but a lot of companies instruct you to use that one anyways, so I don't think there is technically any issue with it.
@joachimsandgaard Жыл бұрын
Water hoooose ✌
@MatlasDI Жыл бұрын
😆✌️
@walterhagans1465 Жыл бұрын
🤣🤣 thanks Matt
@MatlasDI Жыл бұрын
Yup yupp 👌👌
@tommanning7337 Жыл бұрын
😁👍🏻👍🏻
@MatlasDI Жыл бұрын
Thanks Tom 👌
@followtheornghat Жыл бұрын
Another candy snacker like me🤣 I'm an apple 0 guy though
@MatlasDI Жыл бұрын
If it's candy I'm eating it bro. Unless it has almonds.. 👌👌
@ehesh14992 ай бұрын
Breaking free of the 9-5 will soon come to you (Asian accent)
@MatlasDIАй бұрын
Thanks, unfortunately I am back to the 9 to 5 😆 🤣
@loekfelten548 Жыл бұрын
If you want to reach followers beyond the US it would be wise to indicate also values in BAR. The rest of the world uses that instead of PSI.