Old Crow gets cool (rat rod build 13)

[@nealschwabauer6171]

KEEP ON TRUCKIN' . Looks great. Thank you.

[@frankbieryjr2802]

I love watching the progress. I'd think a roller would be the next step. Can't wait to see whatever you do.

[@AndysDogHouse]

Hey Man. It's sure coming together nicely. I really like all the custom metalwork in your frame. I think, while you are at the front of Old Crow, you might as well stay there. Thanks for sharing.🍁👍👍

[@ponga782]

That's some pretty cool suspension fab goin on there.. I dig it!

[@bradycreativeart]

Curious to see the back end come together. Looks great so far man! Very impressive work.

[@ericdeyarmin2469]

Always easier to have a rolling chassis. Two thumbs up on the work brother!

[@raymorrison919]

great job so far, I'd think about steering next if you haven't already

[@niriaashwell5885]

make it a roller spent 3 years in a panel shop wish it was your one i would be a wizard like you take my hat off to you good sir thanks for the lessons

[@richardlees778]

Awesome job keep going with the front end

[@medicaided42]

roller is best great work man

[@shanethompson7543]

Old Crow is coming together

[@shanewright6958]

It's really looking good 👍👍🇨🇱

[@PhillipCornwell1974]

Get it rolling!

[@eastbooral928]

Should make it a roller love the Fabrication work....from Hervey bay Queensland Australia.....Billy

[@saarinenjarno6913]

Quel travail! Vraiment impressionnant. Dommage qu'en France, on ne puisse pas rouler avec un tel engin.

[@craighall2819]

Awsome job be proud

[@smallblockfuelie]

The audio is better. Thanks for fixing that.

[@HardCoreFab]

Thanks for the heads up! I'm so glad to hear that. It has been such a struggle.

[@moparmike857]

Awesome build so far...I’d say roller...pretty trick front clip

[@donniehamlett2157]

Cant wait to see it as a roller

[@robinenglund9553]

Looking badass 🤘 hood then chop the top 🙈😁

[@mr_paw_t]

i just caught up... very good craftsmanship, i vote roller

[@manvanket7698]

You are my inspiration

[@HardCoreFab]

Thanks man!

[@richardgallardo9624]

KUDOS! Go at the rear end I'm excited to see it rolling.

[@tat255987]

Get it rollin

[@craigcaggiano431]

Looking good, I’d say finish up front before you go to the back. Hood mounting and steering next.

[@timothynewkirk2654]

Looking RAD! What size tires are you running on the front? Very cool 👍... Newk from Kentucky

[@HardCoreFab]

Thanks! The info on the tires is in this video kzbin.info/www/bejne/sHebnmtvpbF2fpI

[@aggie91kuenemann76]

Nice progress, i would work on getting the steering set up and operational. Keep your flow of working front to back. Hood is cosmetic at this point. Steering, than rear suspension, then brakes, then fuel system, then electrical...

[@mrmiami516]

Start making it a roller! You're terrific fabricator. You must sit down for many hours before you start.

[@spiderbrandt4066]

What degrees did you set the front end to 7dg ? nice to see progress on the old crow keep up the good work

[@HardCoreFab]

It is at 6 right now but with the rod ends on the bottom arms it can be adjusted as needed.

[@spiderbrandt4066]

@@HardCoreFab Awesome It is that in the footage the front end looked straight up and down , 6 is good , I would be happy with that on mine . Now I'm having a bit of a slow run with my 39 can you come over and help out , if your not busy , I'm down is Qld Australia I've got a good shed and a spare room ?

[@HardCoreFab]

I've never been to Australia! Sounds like a good time but it would have to be when there was some skid-chucking going on!

[@glasscitysocialclub]

I'd go ahead and make it a roller, might help point you along on other aspects. Curious where you got the radiator.

[@HardCoreFab]

There is a link in the description below the video.

[@rogerknox3799]

What shifter did you go with?

[@HardCoreFab]

Still not 100% yet

[@rogerknox3799]

I tried to send you a picture of the old 32 revolver that I threaded the barrel of and screwed it to my shifter rod. It’s cool looking but I haven’t been stopped by the cops yet. So I don’t know how good they are going to like it. Lol

[@primalpain194]

I’m curious to see what you do with the hood and the rear end. I really hope you cut old crow into the rearend mounts somehow. Like you did you the front end. Love this truck brother. But I agree with a lot of the people on here make it a roller so you can move it around the shop. Just don’t stick it in a corner and forget her lol

[@skeltane]

Yes, grill and hood.

[@nathanpullin467]

How and where do you determine where the engine is placed?

[@HardCoreFab]

Thats not something I can easily answer in a sort reply. I'll do a video at some point

[@streetkd08]

Make it a roller!

[@williamchildress1459]

Finish the front end up.

[@hankpugh4980]

Do the rear,time for it to be a roller. At least you can move it around the shop easier.

[@HardCoreFab]

Good point!

[@paulwhite9076]

Might be easier for you to have a roller now for later down the road take care

[@PatrikLiljeroth-je2he]

Cool Rod. Fun to see rods come together. But i gotta ask. Those tube ”bongs” ore what you call it what is the correkt name? Gotta buy some :))

[@HardCoreFab]

Those can be found on Amazon here: amzn.to/3rGCVJH But we also sell them. Hit Julie up ( [e-mail]) about them

[@rustyriggsgarage5249]

Do the back end, make it a roller

[@Backyardrust49]

Are you going to run an electric fans that radiator looks really close to the engine

[@HardCoreFab]

I AM!

[@georgemcmillan9172]

At the time of my viewing, there was 1 dislike. Must have been a Prius owner who found it by mistake! As far as to what you should do next? You taking the time to record, edit etc, we all enjoy watching it progress, but you would know best how to utilize your time and skills! That being said, my prefference would be to start making it a roller! By the way, I'm glad that you're basicaly building this overspec. Us "fat" guys need things to be beefy so they will last! Still waiting for the merch link...😁

[@HardCoreFab]

Thanks a million for your support! Yeah I have a hater I guess that means I've made it. LOL As for Merch link we now have some stuff live on our website HardCorefab.com I will be talking about it in an upcoming video.

[@georgemcmillan9172]

@@HardCoreFab awesome man! I'll be checking that out shortly. I hope you didn't take offense to the " fat" comment. I know how it is not being average sized. There are some vehicles I litteraly had to open both doors to get in, never mind driving them. I'm really enjoying the build series, and can't wait for the next installment!

[@Michael-wq8qu]

Roller as what to see how you will do that.

[@tpledger100]

drill and tap don't go all the way thru and the bolt length is not an issue

[@johnpeterson470]

Front to back

[@anthonypoole6106]

Paint it with chassis black it will age and look good b?

[@kennshotts7258]

I tried but could only finish with the sound off.

[@pieterbezuidenhout2741]

Great job but l'm getting constipated listening to that ' forced ' tone. Calm down bro.

[@alfredjuhlin8215]

roller

[@stevenhughes3686]

Go to the back

[@williambrennesholtz8310]

I would just continue front to back

[@jamesferrell9404]

I think grill and hood

[@joepenkova4153]

Make it a roller

[@hoppybobsommers]

Hood

[@curtisharrison4837]

A roller is easier to move.

[@mattb1372]

I’m kind of disappointed, all these awesome Brackets being custom designed & shaped then you go & mount the radiator with crappie square tubing, That’s like a after thought- if it was me I would re-address that area to make it all look same/ similar in design But all in all, awesome work, the truck looks Cool either way Keep up the great work

[@HardCoreFab]

I've put alot of thought into that area before I built it. It is going to be all hidden and it needs to be pretty strong in that area as well. Also, with the front arms there and shooting for the biggest radiator possible I only have a few inches to work with. The bigger factor is the rest of the design of the front end and without that info I can totally see where you're coming from. Thanks for watching and stick around. I don't think you will be disappointed.

[@raymondcoggins297]

Get front done

[@niriaashwell5885]

f$%& you are good !

[@lawrencephaneuf2977]

Make it a roller 1st.

[@eddysamson3465]

screw that thing work on hot rod in the back ground

[@TrendsbySterling]

Make it a roller!

[@terrykelsay6260]

make it a roller

[@fredtate6795]

Make it a roller

[@blacknova28]

Make it a roller

[@derby9175]

Make it a roller