Ultimate Welding Cart with Folding Table Extension

I make this welding cart to fit my Mastroweld MIG-250MI Multi purpose welder. I wanted also a small table where I can weld inside and outdoors. Due to my limited space, I wanted to combine them. It has adjustable feet on the table to allow for uneven ground and locking pins in the folding pieces for extra safety. All the ends of the tubing are closed up and ground down. It features a torch holder, cable hooks and a place for accessories and grinders. The table surface is sanded clean and covered with anti-splatter spray for easier cleanup. I'm not a welder by any means but i think it won't fall apart and if I always can weld it back together.
Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: / ollaris
Or tip me: www.paypal.me/OllariS
Visit my Website for more details: www.ollaris.tv
Subscribe for more videos: / ollaris
Twitter: / ollari_s
Instagram: / ollari.s
Music by Epidemic Sound (www.epidemicsound.com)

[@michaelarenal1578]

That was a sweet welding table & great video. No talking...no crappy techno music...just the natural sound of welding fabrication. Thanks!

[@Ollaris]

Thank you very much! Glad you like it!

[@PurveyorOfCuriosities]

Love this video! No stupid talking, no stupid music, no stupid opening, no stupid break taken to play with your pet or small talk passers by. Just good informative content. I appreciate this format so much. Side note: You should sell plans for that welding cart.

[@Ollaris]

Thanks! I take that in consideration!

[@ElBrisho]

How can anyone dislike. That was fucking CLEAN!!

[@Ollaris]

Thank you very much!

[@BigPowerAL]

Looking to build a cart for my new welder. This is a really great example of a well designed cart. Well done !

[@Johan_Pentrose]

Yeah very well done! I am going make one for my AHP 201xd. Love the design and the table is brilliant. Good work. I will have to watch the video over and over until i cam make custom plans for my welder. Cool new project

[@prabhupillai9386]

Really a smart welder... Each and every bit of cutting and placing.. Excellent..

[@billy19461]

GREAT JOB!!!! From a retired welder.

[@Ollaris]

Thank you very much! That is really nice to hear from a pro!

[@rafaelromero742]

Thank you for the idea! This is exactly what I need. I have no space currently at home for a big table and this would work perfectly for me.

[@chybz]

Nicely done Seb ! As always, very clever design, thank you !

[@Ollaris]

Thanks Remy!

[@BrettL64]

Nothing left but to say " Thanks for the idea. Your instructions methods tips and shortcuts are likewise much appreciated"

[@Ollaris]

Thanks a lot!

[@johnkimani254]

Lovely concept and gives courage to non-welders like myself to give it a try! Thanks!

[@amscout1156]

What a great idea. The table would be great for cart I've got my powertig welder on.

[@Aardrijk1]

Terrific design!! I have got to build one of these for exactly the reasons you did! I'll probably watch this 30 times. :)

[@Ollaris]

Thank you very much! Glad it inspires you to make one!

[@billcarter1199]

Very cool man I'm needing to build a welding cart for mine never thought of adding a table to it to awsome

[@donvanco3078]

There's something really satisfying watching metal get welded then ground smooth. Another nice and very functional build!

[@Ollaris]

I love it too! Thanks Don!

[@kylecagle4808]

I watched this because the pop up table intrigued me. Excellent idea and excellent build on the cart entirely. I will be adding a pop up to my cart ASAP.

[@Ollaris]

Thanks Kyle!

[@mkbcoolman]

I just picked up a new multi-process welder, and need to build a new cart. This is the perfect idea for my hobby shop. Having that folding extension is a brilliant idea. Nice work sir!!

[@Ollaris]

Thank you very much!

[@davidfrank2824]

I have to say with no doubt that you have built the best welding cart that I have ever seen built on KZbin. I love how you use that round stock and put it on for the handle with notching around stock to match the square stock. I have never seen anyone do that. So once I get the technique memorize I'm definitely claiming it for myself telling everybody I came up with that idea -) but seriously I don't even know how you came up with that idea for that cable to come out. I don't think there's a part of that cart that I don't love. I honestly think I'm going to give it a try over the winter since all my projects are normally done by then. I've been looking for something to do during the winter since I'm retired and I'm not going to go outside in the cold. I rather spend it in my garage working on something. I must definitely hit the subscribe button and the like button. I'm really looking forward to seeing more of your work.

[@Ollaris]

Thanks a lot I really appreciate it!

[@sgsax]

Great design! Compact, yet good storage and nice-sized work surface. Thanks for sharing!

[@Ollaris]

Thanks Seth!

[@davecross5317]

nice build. I'm getting ideas from all over and you're take on a cart is a good one! Well done.

[@emoneyblue]

Man probably the best build I've seen on youtube.. well thought out.

[@Ollaris]

Thank you very much!

[@JDLarge]

Such a smart design! You’ve given me some great ideas thanks for sharing!

[@Ollaris]

Thank you very much for watching!

[@tnyberg67]

Love the folding extention! Thanks for sharing.

[@jasonsherrill5291]

Impressive craftsmanship!! You did a great job, I hope I can make one half as nice as this.

[@myronjohnson8899]

That is a cool cart. That would be a great addition to my everlast welder.

[@jaimeland9392]

Que capricho!!!! Parabéns pelo projeto 👏👏👏👏👏

[@muddyfences5559]

Fantastic design and build. That flip out table is sweet.

[@paddlepower888]

Beautiful. Thanks. Great folding table. Love the torch holder. One day, I'll grow up and attach a folding table to my cart.

[@JohnMadeit]

great design. when i get into welding i will have to use some of these ideas.

[@Ollaris]

Thanks John!

[@edwardrodriguez6374]

Muy buen trabajo un suscriptor mas. Like comparte las medidas

[@christofix]

This is a wonderful project. It brings me ideas to do this with my own welding machine. Just brilliant how you use the folding table in the cart. In this way, this takes up little space to store and you always have everything, wherever you go. I'll keep following you, I'm a fan!!!

[@Ollaris]

Thanks a lot Christofix!

[@kcookish]

A lot of thought and design went into that project. You are most likely someone who lays awake at night and designs things over and over in your head … til you finally doze off,, I can understand that, I find myself doing the same thing. Great creativity !

[@Ollaris]

Thank you very much KC! That’s exactly how that goes! 😅😂

[@edson-leonfox7]

Parabéns pelo trabalho feito, serve de referência para fazer uma dessa para nossas máquinas de solda, ficou muito boa!!!

[@saloram990]

so far coolest welding cart I ever see

[@Ollaris]

Thank you very much!

[@markust.8368]

Now this is a brilliant idea and very nicely done! I will be doing this after I finish my saunaproject. Thanks for sharing this!! 🙏

[@reforzar]

Dude! If I ever start welding I’m building this. Awesome idea. Calming video. Great work Seb.

[@Ollaris]

Thanks my friend!

[@woodbineshark]

thank you for sharing this great video, just picked up a mig and I'm looking for ideas on how to get setup in my shop, this is great nice work . M from Calgary Alberta Canada

[@Ollaris]

Thank you very much!

[@JDLarge]

Perfect! Love the space saving thought put into this. Having a space tight workshop I think this will be my next build. Currently I’ve converted a small shopping cart into a mobile stand but still have to roll it over to a table so this idea nails two birds with one stone! Thanks for sharing👍🏻 I’m sold and a new sub now😉

[@Ollaris]

Thank you very much Joe!

[@MnktoDave]

I like your design for that fold down wing. It's flat, quick to set up and take down, has adjustable feet, and takes little to no storage space. All the best features for a good quality, portable welding table. Nice! I built my table with slide out wings for both sides, but they don't store with the table, and they take a little more room to store.

[@Ollaris]

Thank you very much! It’s a bit heavier than i would like to roll around when working outdoors. I might downgrade to a smaller tank though.

[@MnktoDave]

@@Ollaris Yes, I completely understand what you say about the weight! My main table is 39" X 48" (w/o ext) and very heavy to move around, even with good castors. Each extension gives me another 3' on both sides (totaling 10' in overall length for large jobs) but adds a lot more weight. That was why I decided to make them slide out instead of folding, but I really do like the compact folding design of yours. Since it's such a beast to push around, I also made a 2' X 3' top (1/4" thick) that quickly fastens to my Harbor Freight 1,000 lb lift table, and that's often what I use for smaller jobs. It works great, moves around easily, I can set the table at any height I want, and when I'm done I just remove the top and store it out of the way on my lumber cart. I find myself using this one way more than I ever thought I would because it's so handy, and if I'm working on a taller project, I just drop the table and it makes everything so much easier to reach. I'm looking forward to seeing what you build with your new anvil and table.

[@jacobbleary4806]

Wow! That's one hell of an idea and table/cart. Love it and have been trying to find good ideas about this build for my new welder and tanks. Thanks again for the straight and to the point video. Have a good one brother!

[@Ollaris]

Thanks a lot!

[@MCsCreations]

Brilliant work, dude! Really nice! 😀

[@Ollaris]

Thanks man!

[@user-jk8cy6xg3s]

Very good stuff! I'll do this myself! Good luck to the author, and greetings from Russia!

[@Ollaris]

Thank you very much!

[@FooTech1976]

WOW man that is fantastic! Great job, and thank you for taking the time to film and share!

[@Ollaris]

Thank you very much for watching!

[@jeremyspecce]

Very creative, love the folding table. I used to keep my gloves flat on the bottom of my cart and then I found a mouse had moved into them. 🙀 now I clip them onto the side of the cart with the ground clamp!

[@Ollaris]

Thank you very much! Good idea!Haha! You didn’t use them very often huh?

[@DiesInEveryFilm]

Awesome work Sebastian love the fold out table design 👍🏼👍🏼👍🏼

[@Ollaris]

Thank you, brother!

[@danielecerone7536]

0u7yj

[@StudioJLT]

Sweet cart! I don’t even weld and I want to make this.

[@Ollaris]

Thanks! Perfect, time to get started! ;-)

[@Jennifer-mt5cx]

trash if you dont nowe how to welding

[@gthmcty111]

Looks great Sebastian!! I love the planters you added as well!!! Great video man!!

[@Ollaris]

Thank you! Ha! Yeah, I convinced my better ¾ do put some up!

[@sir_pig2110]

The folding table made me shook, really awesome cart dude👍

[@Ollaris]

Thank you very much!

[@andrericardoantunes5752]

Muito bom! Parabéns!

[@luisrobertosilva1606]

Parabéns brother, vou copiar seu projeto.

[@FavaretoSE]

Hehe eu também !

[@jbravo70]

You should sell these. Best one I seen so far.

[@bradthurkle7217]

Wow I’m impressed. Very very clever design.

[@Ollaris]

Thanks Brad!

[@bradthurkle7217]

Pleasure mate👍

[@bryanm3433]

This is amazing man. Thank you for sharing this with us. Just got a new welder myself, and been trying to figure out how I'd have space for a table, and this is the absolute perfect solution. Thank you!

[@Ollaris]

Glad you enjoyed it!

[@user-dc1qp2hh6n]

Creator, greetings from Russia. Health to you.

[@BradHedges]

Excellent craftsmanship! Nice design, looks very practical. Well done!

[@Ollaris]

Thanks Brad!

[@FreshAnton]

That Table Idea is SICK.

[@SharpAndCunning]

Do you offer a set of plans that I can follow to make this? This looks like the perfect table for me

[@davidemanuelspengler1803]

Alguien le de al muchacho una cerveza... Bien se lo a ganado... 😀👍

[@darkstatmat4891]

es mas facil con hilo ?? porque no uso 6013??

[@doc1701]

Great job - you made it look so easy. Thanks for taking the time to upload the video. All the best from Australia.

[@hea5843]

Waw! Great design! Very inspiring! Thank you!

[@Tiersmoke92555]

Tip- put the spot on the inner edges and it gets easier to square the frame.

[@Ollaris]

Thanks! I remember it for the next time!

[@franciscowashington2155]

Muito bem legal

[@user-zt4zt2on5r]

Приятно было смотреть.Руки золотые.

[@samsue1224]

Awesome work man I was just starting to plan this and thought “hmm, surely someone has already done this” You did not disappoint

[@marciosantana9879]

Amigo gostaria de saber as medidas usadas na construção. .

[@mikefinley4367]

Awesome build ! When using a chop saw cutting long lengths, block support your piece at the distant end. Not sure if you have ever had a issue without doing so but it's done in carpentry and long length of plumbing pvc drain pipe for best accuracy cuts.

[@panick.attack]

Wow, great build!

[@DavidPlass]

That. Is. AWESOME. My first welding cart was too bulky and I have no room in my garage for a table so I was thinking about making a table/cart combo but never could figure out the mechanism. I may have to rebuild mine using your ideas!

[@Ollaris]

Thanks!

[@harduszandberg]

This is such a great idea! I'm fabricating one right now! Thanx for the great videos, gives me inspiration and some helpful tips.

[@davidvarney7353]

Great design and exactly the plan I’m going to use for my own weld cart great job

[@nvlvdave]

Outstanding design and build. Great Job!!!

[@vanderleiwandeur4833]

ADOREI ESSE PROJETO ....CONGRATULATIONS!!

[@snoopu2601]

Thank you for sharing I'm in a wheelchair and I want to make a welding table but not to big just looking at many video's to see what kind I'm going to make. By far the best one I seen yet for me.

[@Ollaris]

Thank you very much. It might be not ideal for you in this particular hight and weight. It’s pretty heavy but i think you could alter the design to make it a bit lower and maybe with a smaller bottle. I think you could use the space underneath to get closer with your wheelchair. And im sure you could fold out the table part if you make it a bit lighter as well.

[@snoopu2601]

@@Ollaris thank you yes I was thinking the same thing I'll just get smaller square tubing and make it to my hight 32-34" . I have done many drawings of just the table I like the set up for the welder your right I probably won't have the bottles but I will make a spot for them just in case. I'll find some good casters for the table. There is a store in Berkeley California just for industrial casters they have all types of wheels. I have a place for the table but if I need to move it to a diffrent location I want to be able to move it. I see other people making welding table but they need a Crain to move them. I don't want my welding table like that. I know what you mean about the small table being heavy. It's like my GMC Suburban tail gate it is very heavy to lift even the back door over the tail gate with the window very heavy to lift I couldn't lift it because I was sitting to low.

[@romildocaetano1739]

Quando pensamos que já vimos de tudo aí vem você e faz esta marilha de mesa (bancada) multifuncional. Parabéns pelo projeto.

[@jaldemirbatista7603]

Fantástico, que bancada funcional! Parabéns!

[@aaronwillett820]

Nicely done! Well thought out.

[@VNV67]

That is a VERY nice Welding Cart. I have one that I am working on that has the welder, plasma cutter and gas torches all in one, but I don't think it will roll in the Florida sand to well. This is he only video I have seen that gave me welder Flash Burns to my eyes. I am still seeing spots.

[@jacktracy4845]

Nice job. Great design.

[@Willeexd1337]

One of the best welding carts ive seen!

[@Ollaris]

Thank you very much!

[@benvin10365]

Excellent cart and build!!!

[@Shoyun81]

Really nice cart !

[@walterforsiethe2567]

I love your idea for the table extensions. I don't have much space either and that design would be great for my everlast welder.

[@Ollaris]

Thanks Walter!

[@datalaforge]

That cart is absolutely glorious! It's also nice to see that the wall is holding up too :) Richtig toll!

[@Ollaris]

Thank you very much!

[@eloyworkshop541]

Excelente trabajo!!! Saludos desde España

[@johndude70]

love the compact space saving design.

[@ivankal1191]

Excellent work! Tomorrow I start to make my version inspired by your solution - enabling both welding and woodworking.

[@Ollaris]

Thank you very much! Great, have fun and stay safe!

[@danielsjack9018]

Mister Ollarís: Cart with folding is VERY GOOD, congratuletion. Atte. D J.

[@johnenriquez7993]

What a true craftsman. I wish I had half that skill.

[@Ollaris]

Thank you very much!

[@BrothersMake]

So cool Sebastian! Wish we had space for a welder. Top of my list if/when we get to upgrade our workshop space!

[@Ollaris]

Thanks! I'm sure you both would love it!

[@indoremechanics]

simple and best weld table. This type of things Inspires me most. Great job

[@Ollaris]

Thanks!

[@ShopNation]

Awesome cart design! Just may have to leverage a couple of ideas when I make mine. Good work!

[@Ollaris]

Thank you very much!

[@michaelvoronov5716]

Good job, man. I will take note of the mechanism of transformation.

[@STohme]

Very nice project with interesting design. Congratulations and thanks.

[@robertwellner1247]

Nice work nice foldout worktable

[@charlesstarkey5256]

A very very clever design well executed Sir! I tip my hat to you.

[@Ollaris]

Thank you very much Charles!

[@TheJaylen94]

What a nice build ... I Love it... You Made a really nice Job ..

[@alfredodokaj7177]

That is what is called smart craftsmanship Thank you for sharing

[@Ollaris]

Thank you very much Alfredo!

[@CocaineYT]

The best welding cart in KZbin, Greetings from Poland :)

[@TK-qx9mc]

Wow, this is so great. You are a genius. I just took my first welding course and this will be a good project. Many thanks.

[@Ollaris]

Thanks a lot!