OmniHub Smart Pool Control: Easily Automate All of your Pool Equipment

[@whitemok]

Thanks. I'm installing it tomorrow. Because of you, I am ready with my gloves on. You make da best videos.

[@dannieboiz]

Can the controller be connected directly to the pump without the low voltage hub?

[@SPL]

I don't believe so. But you can check with Hayward

[@SPL]

I don't think so. But check with Hayward.

[@IEraiderfan]

Amazing pool system I think this is what my son has forr his custom pool. Thanks for the video.👍👍👍

[@dantheman6931]

How’s this compared to Pentair’s system?

[@SPL]

It comes with a 4 year bumper to bumper warranty (TriStar 950) vs Pentair 2 years. HP is about the same. The Smart Pool Control is unique to Hayward. In my opinion, this is now the #1 system.

[@donays8241]

My touch screen is hard to use it. How can I clear my program and start over , because the valves are a messed

[@SPL]

You can connect it to your phone and use the app.

[@imlon2]

I'm going to be installing at new pool in the Spring. Pools will be 20,000 gallons. equipment I will have is... Hayward heater, Color Logic 12v Lights, Salt Generator. I like the controls with the VS Omni, but don't know what size pump I should get with that. And If I wanted to control the Pump, Heater, and Lights from my phone what all parts do I need to get that does not come with the VS Omni and Pump? Can I hook up the Omni with a standard electric panel or does that require one of the Hayward panels.

[@mikemcgillick5591]

the wire to the my keypad is short. do you they have longer wires to move the box for better wifi reception ?

[@SPL]

Yes, Hayward can supply you with a longer wire.

[@jamespollock2108]

Where can one buy this pump?

[@SPL]

At your local pool store. Not sold online.

[@ROBERTLUCIAn]

Thank you for a GREAT VIDEO. Where can I buy the system without the pump?

[@SPL]

A local pool store should be able to order that for you.

[@alpac9191]

Hello , im currently in the process of installing this system to my pool. What equipment do i need to connect my colorlogic lights to the omnihub? Having a hard time finding literature for this.

[@SPL]

Give Hayward a call on that.

[@isaacsmith650]

I’m also wondering if you like this pump more than the jandy

[@SPL]

At this point, it is a tough call. But with the Smart Pool Control Hayward has the edge.

[@electricalsmokealarmsandmo1564]

Do they make a version of this system that is able to be used for a new construction pool and spa combo? Which pump would you recommend for a pool and spa combo with 1 1/2 inch PVC?

[@SPL]

Your builder can buy it for a new install.

[@Shadowwand]

Does the controller also support 3rd party API integration? I'd like to control the device from some brew controllers rather than their proprietary app.

[@SPL]

Don't think it will work with anything but the Hayward app

[@rydogg2006]

Just built a pool with this equipment. My pool builder has no clue how to program it. They got it all wrong. What can I do to fix it?? My heater is not showing up on the screen and my lights do not sync. I have a main pool lights and 2 spa lights.

[@SPL]

Hayward has an hour long programming video. You can watch that and reprogram your unit. kzbin.info/www/bejne/bJm3h52MnL-gf5o&ab_channel=HaywardPoolProducts-LatinAmerica%26Caribbean

[@DailyDoseOfFinance]

The looks great! but do you need all of the extra equipment if you only have the TriStar VS 900 pump to control?

[@SPL]

Yes. You will need the kit to make this happen.

[@GoingNowhereFastBFL]

Hi, I had a stroke I'm in electrician and I've done some pool stuff but this is probably a little more technical when I start to add accessories. The problem is I lost my job and I can't afford to pay somebody to do this. I'm installing the Omni VS950 with a smart relay. I want to know if I can have the Smart Relay set to switch on only when the pump is on or at least set times to match the times on the pool pump comes on. What the Installation manual says is, "Would you like to add a pump driven accessory? Select whether or not you would like to configure a pump driven accessory. NOTE: this option only appears if more than one variable speed pump is discovered. So does this mean that I cannot add a pump driven accessory unless I have a second pump? I certainly don't mind setting my accessory to be a pump when it is not. But I'm not sure I understand the significance of it needing to have a second variable speed pump. Am I able to just set the smart relay to come on at the same time the pump comes on regardless of what the accessory is, maybe I only want the accessory to work at the same time with the pump. Not sure if I'm understanding this right but could I just tell it that the accessory is a two-speed pump and therefore set this smart relay to come on at the same time as the primary pump. It doesn't really know what's on the other end I can't imagine unless it wants an Omni pump with rs485. Otherwise, is it just asking for the parameters so that it thinks it's controlling a pump for some reason, or will it want an RS485 to this accessory I am calling a pump thats a non-existent second VSP, or will the relay just turn on because I told it it was a pump. So I'm trying to understand can I do this without a second pump and just have the accessory come on with the smart relay whenever the pump is on or do I have to try to trick it in some way? The instructions ask about pool accessories how many and then I can turn on a pump when the accessory is scheduled to run. So in theory I think I could tell it I have an accessory and I wanted to run and then program the same times as the pump I guess? But maybe I can just make the relay come on without all that mumbo-jumbo with the pump. Thanks for the video btw, Doug

[@SPL]

Short answer, give Hayward tech support a call and they can help you set that up.

[@GoingNowhereFastBFL]

@@SPL they said to set up interlock, the filter pump as #1 and supposedly the HUA for the Smart Relay will show and I can select that to be linked. It took talking to three people before I got somebody named Scott that knew what they were talking about, and a couple times the system hung up, and a couple of times it was voicemail. So I'm finishing the installation and then I'll try to do the setup and hopefully it will work. But supposedly you can run a single speed pump to come on with the filter pump through this interlock config.

[@bonehyamah3115]

Do you have a video of complete installation?

[@SPL]

Hayward has one posted on their site.

[@nachomota7242]

?, I see that the pvc piping was painted. What did you use and what color is that?

[@SPL]

TAUPE BROWN 👍

[@brunoventura4070]

Amazing... can I control a single speed Hayward pump with this omnihub? I want to control pump, heater and light. I would need additional relays? regards

[@SPL]

I think that will go on one relay. Yes, you can turn your single speed pump on and off with this also.

[@travel-2026]

How much is this pump sold for?

[@SPL]

With the Omni smart Pool control $2,500 or so from your local pool store.

[@Herofmine]

Where can I buy this whole set? Planing to install it since my current pump blew up.

[@SPL]

It is a retail pool store only set - so you will have to check with your local pool store.

[@brienlord]

On the Omnihub can I have an actuator that controls 4 laminar jets but when the actuator activates the laminar jets untill it is fully open water goes all over the pool deck. is there a way to program that when turn on the laminar jets that it first turns off the pump waits 20 seconds then turnd the valve to the laminar position then turns the pump back on? then when i turn the laminars off it does the same thing. turns pump off returns the valve to off position then turns the pump back on?

[@SPL]

Yes. I am not sure where it is in this set-up but there should be a delay setting. So when the valve is turning the pump will be off. See if you can find it by pulling up the PDF manual. Look for the delay settings.

[@brienlord]

@@SPL i cant find anything that says delay in the pdf except refering to heater extend

[@thepoolkid6340]

How do you like this pump? It seems like a great system. Does the pump seam as good as the intelliflo?

[@SPL]

Very quiet pump with very similar HP. It has a 4 year bumper to bumper warranty so that tells you something right there. 👍

[@thepoolkid6340]

Yeah makes me feel like Hayward is more confident that they have a good product. I might try to sell one of these to one of my clients that has a hard time operating the spa.

[@SPL]

Yes, great idea! I just finished recording a Podcast with Hayward on it - the best thing is that it is only a few hundred more with the Smart Pool Control vs a standalone VS Pump.

[@thepoolkid6340]

Great! I’ll be sure to watch that video

[@TheJinsun2000]

What's the second smart relay used for in this setup?

[@SPL]

One is set up with the spa light and the other with the pool light. This gives the customer room to add on more equipment.

[@l.wyattcoleman5529]

With the pool we have, there is an omni installed and the spa is set to slightly spillover in pool mode. That means I have water spilling over 10 - 12 hours a day while the pump is running. This is really increasing my Ph. Is there a way to turn this off? I do not want there to be any spillover in pool mode. I would like for all water to go to and from the pool in pool mode. I will then set up a schedule in pool mode to have the water turnover in the spa for 15 - 30 min twice a day. Is there a configuration for this? Is spa spillover 2 to 3 times a day for about 30 min enough?

[@SPL]

That is a good question. You would have to modify the spa bypass to shut that off. I know in the larger systems you can add a spillway program. I haven't tried that with this system yet. I am sure it is possible. Why don't you try adding borates to your pool to bring the borate level to 30-50 ppm. This will help buffer the pH.

[@isaacsmith650]

What brand do you think Makes the best pump and automated system

[@the-hutch]

Can you add Omni to an existing non-omni MaxFlo SP23520VSP?

[@SPL]

It comes as a kit with their VS pumps. Not sure if the unit is sold outside of the VS pump kit.

[@the-hutch]

@@SPL thanks for the quick reply, I'll reach out to Hayward

[@johns.8530]

Awesome video. Thanks to your video, I purchased the same exact system. I do have a few questions though. I currently have a heat pump (which will be direct wired from the breaker box and just the communication line attached to the hub), the 230v Hayward VS pump (230V power from the hub and comm line back from pump to the hub), 115V Hot tub and pool lights (using one Omni Smart relay), and 230V blower for the hot tub. Do I need to purchase another Omni Smart Relay to run the blower? Also, if I want to separate the pool and spa lights so they operate independently, do I need to have individual relays for each light? From what I understand about my setup with the blower for the hot tub and the pool and spa lights working independently, I would need a total of three relays. One for the pool light, one for the hot tub light, and one for the blower. I also would like to add landscape lighting and party lights to the system so how many relays can be added to this Omnihub system? Last question, I have two Jandy actuator valves with no connector for the hub on the end of the wire. Can the connectors be purchased so I can add them to the end of the wires to leave my current actuators in place? Thanks for the help and really appreciate the video.

[@SPL]

It is 3 devices per relay so you would need more for sure. You should be able to get the parts to connect your current Jandy Valve. I would call Hayward for more specific details on how many relays and were to get the parts you need for the actuators.

[@scottscott5718]

I think you can add an extra relay bank if you run out of room

[@andrewpagan8155]

@@SPL thanks for your videos they help out alot. I'm looking into an omnihub system for my setup. I'm getting conflicting quotes to have the system installed and what I would need. One place tells me I need smart relays to control the actuators for the valves and hayward has told me that the actuators are controlled by the hub. I'm just trying to avoid paying for items I would not need. I just want a system that I could put my setup in spa mode from my phone.

[@ThatGuySince87]

Does the VS 900 Omni come with the smart control hub? Or does the smart features need to be purchased separately?

[@SPL]

That controller mounted on the timer can also be mounted in your house. Most people use their phone app so not 100% necessary. But it is in the box when you purchase this bundle with the VS 900 pump.

[@ThatGuySince87]

Swimming Pool Tips, Reviews & How To - SPL thank you. Does it come out of the box with the app control functions? Or do I need to purchase smart control or any other things to run it through my phone separately?

[@SPL]

@@ThatGuySince87 Everything you need comes in the kit. Once you connect everything you simply download the OMNI Logic App onto your device. Very simple.

[@BonnerBB]

Is this modular OmniHub setup replacing the traditional Omnilogic big metal box that has all the relays inside of it? In other words is this more for a retrofit application versus a new build?

[@SPL]

It can be used for both applications. A lot of builders like this because it is less expensive than the big OmniLogic system and can do almost everything the big box automation can. Unless you are controlling multiple heaters and 4-5 pumps the Smart Pool Control is the way to go in a new build. You can't beat the 4 year warranty either. I think all of the manufacturer will be moving to this type of system. The tech is there and in the case of Hayward it uses the same phone app.

[@BonnerBB]

Thanks. Is it less expensive? By how much... Guesstimate is ok. 20 percent less?

[@SPL]

Since the Tristar VS 950 and smart pool control is a retail only product prices will vary. Figure $1,400 for the VS Pump and spamer pool control system. The OMniLogic Panel just by itself is $1,800 plus a VS pump for $1,000-,$1,100. So you save about $1,400 with the Smart Pool Control and VS pump combo easily. Not including the install and set up of the OmniLogic.

[@BonnerBB]

@@SPL Thanks for the detailed reply. Keep up the good work on the videos! I learn a ton from you.

[@joeuy5945]

Where can I buy this online.

[@SPL]

This is a retail pool store only system or a local pool company can purchase and install this for you.

[@gilbertoreyes733]

Great videos keep up the awesome work! Question will the system actually automate all my pool equipment? 950vs pump Hayward gas heater 3 actuators 1 pool light 1 spa light 1 spa blower ??????????? Or is the system still limited to only so many smart hubs you can add and only so many options you can control? Thank you Happy Holidays.

[@SPL]

It should do all that. Each smart relay can handle 3 devices. So you are good. It is a really innovative system for sure.

[@stevengamble1550]

Trying to see if it has wireless wifi to house 75 feet away or has to be hard wired.

[@SPL]

It has to be physically wired at the equipment. So you would need to order a 100 ft cable if you wanted to mount it in your house. Most would just put it by the equipment like this and just run everything from the App or Alexa.

[@stevengamble1550]

@@SPL I want to use my iphone. no I don't want to mount it in the house. How does it communicate to my iphone without wifi ? I am searching to find out.

[@SPL]

I totally misunderstood the question. Sorry. It needs to connect to Wifi at set up to connect to your phone.

[@stevengamble1550]

@@SPL I can't find any wifi connection info for this unit in All the video's or literature?? How to connect this unit to wifi - wishing there was some demo explanation for this. Is there a 4 pin connection for the Hayward wifi unit, or cat 5 or ?? Where is this info found?

[@SPL]

In the initial set up menu. You enter your wifi address and wifi password.

[@OzkrRodz]

I’ve got the Maxflo VS 500 (non-omni), what do i need to buy to control it from a smartphone?

[@SPL]

You will need This controller and a relay. You may have to ask your local pool store how to order one without a VS pump.

[@OzkrRodz]

@@SPL ok, thanks!

[@OzkrRodz]

I saw 3 items on the box, what are their names? Theres a controller (the one with a screen?), a relay (the small box?) and then theres a bigger box (what is that?). I suppose i just need the one with the screen and the small rectangular box, right?

[@SPL]

@@OzkrRodz You would need all three. The larger box is the wiring base unit. You can read more here about it. A great system! www.hayward-pool.com/shop/en/pools/omnihub

[@OzkrRodz]

@@SPL thanks!

[@lb3724]

Their marketing and even these types of videos are still unclear to me - does the pump itself come with the remote control capability? Or does the pump come with a control unit in the box? Or do you do you need to purchase an additional smart control “hub” or interface? My pool is small AND old and I only need a 1.5HP pump but the ability to control things via a smartphone app is very important to me. Recommendations?

[@SPL]

Yes, it can be a little confusing. You need to purchase one of their VS pumps that is sold as a kit. So it will include the VS pump, one relay, and the Smart pool control you see here. Then you would need to purchase the Valve Actuators separately if you have a pool and spa combo. Hope that clarifies a bit.

[@lukepoolservice]

how long did it take you to install?

[@SPL]

2-3 hours.

[@alexguerrero3079]

With 2 guys right

[@SPL]

Yes. One doing the pump and the other wiring the system. Otherwise longer.

[@BR1967FE]

Nice, video, the for the info

[@slake0]

I SAW UR STICKER LOL

[@jake_3946]

trash product. trash company. if you want quality buy pentair or jandy. save yourself a headache and dont ever buy anything hayward

[@SPL]

I get your point. 👊

[@freedomhiking6925]

Ive been a business owner in the pool service industry for 6 years and in the industry in general for 15. Such a ridiculous concept for the pool care provider. Let’s say every customer has this system (which I personally do around 15-17 pools per day 5 days a week). So.... I need to log into an app, punch in a password to access their system to turn it on and off? How dumb can Hayward be to not have an outdoor pause button, clean mode button and a start button? Nevertheless, Hayward over priced crap. They engineer their products poorly so you’re having to replace major components rather than making 3 parts out of their one part you have to replace the expensive one part rather than them fabricating that part into 3. Always go with pentair.

[@kevinhall9049]

you should research before talking. the unit has an external control you the service guy use to turn on/off equipment. guess you wrote this before watching or checking smh

[@HollywoodBush]

You should really delete this comment since it is not accurate. There is a Service Mode specifically for this reason built into the display which doesn’t require you to have access to the customer’s phone app account. I would never hire your “15 years of experience” based off this comment since it shows you don’t know much.

[@dkd114]

Glad you're not servicing my pool.

[@scottmarsden3955]

As much as everyone hates this guy for the comment… this is the issue I have currently. My remote is installed inside my house. So my pool guy have no control to turn on my system if it’s off. If it’s scheduled to be on, he can turn it off, but not if it’s scheduled to be off. He has to have access to my account. That’s too much for someone working so many pools in a day. Major flaw, unless I’m missing something.

[@moniquelarge6227]

I am having a hard time getting relay to work- can u FaceTime me to help

[@SPL]

Call Hayward on Monday. They will help you out.

[@ryanbennett8086]

How does this setup connect to the heater assembly? Does this somehow control the heater with the app and control panel so you don’t ever have to go and manually turn on the heater?

[@SPL]

It controls the heater from a relay. So you control it remotely like a garage door opener with the ability to turn it off and on.

[@ryanbennett8086]

Can you install the touchpad in the house away from pool equipment? Or does it have to be hardwired in ?