I built the arf version of this. Hands down my best 3d 60" at the moment. Super aggressive and no wing rock. I would buy another without question
@mabelpi22828 ай бұрын
Great video, hope you have fun with OMPHobby airplanes.
@tonydarst82118 ай бұрын
I like it. A lot!
@keepondoubletruckin84666 ай бұрын
Thank You
@slange4558 ай бұрын
Looks nice only thing I don’t care for is the brand name on the wing …don’t see that with other brands
@garyrice46108 ай бұрын
It comes pre.printed in the covering. You can buy the green one. It doesn't have logos on it.
@brandonwesson68182 ай бұрын
What Rx would you recommend? About to order this plane very soon. Would really like stabilization just incase i got into trouble. Btw i have a radiomaster TX16s so it can control spektrum and most all others
@stephenrout90255 ай бұрын
hi where is ceg do we have li po as far foward as we can thanks cant find any thing about ceg
@alwaysflying65405 ай бұрын
Run a 4ooomah 6s all the way back to the wing tube. You will love the way it flys at this location. It's my favorite 3d plane right now
@fishing83744 ай бұрын
Thanks very helpful
@align1967yt3 ай бұрын
Quick question what is the extra wire on the speed controller. And what is the other connector in the battery compartment????
@garyrice46103 ай бұрын
Telemetry
@fishing83744 ай бұрын
Which wire from the speed control go to the receiver
@weshillsberry6275Ай бұрын
Never CA your gear covers to the fuesalage use some shoe goo or something and glue yhem to yhe gear. A solid CA seal can crack and rip the covering on hard landings u want some flex at the fues glued to the gear
@stephenrout90255 ай бұрын
hi do you strap lipos down and velco them
@garyrice46105 ай бұрын
There is a velcro strip that goes inside the fuse and a strap that goes around the battery and the former inside the fuse.
@mattsrcking6 ай бұрын
What glue did you use for the rudder hinges? And same for horizontal? I’m a jet guy so usually use hysol.
@theshredder98226 ай бұрын
I use the hysol loc tite 608 or i have used regular 2 part epoxy
@alwaysflying65405 ай бұрын
I use formula 560 canopy glue. It glues plastic to wood like nobody's business. I glued the stab and even my control horns. Mine was a kit. I fly it hard. Never had a failure in all my years building. Water cleanup.
@jimrice42708 ай бұрын
Can I have a Flight after I fly it? Good Job!👍🙂🇺🇸
@tap90834 ай бұрын
How is the PNP version holding up. My concern was the servos, with lack of parts availability.
@garyrice46104 ай бұрын
30 plus flights and no problems
@garyrice46104 ай бұрын
30 plus flights. No problems so car. I fly it as hard as I can.
@tap90834 ай бұрын
@@garyrice4610 Thank you for the info.
@stephenrout90255 ай бұрын
hi whats the best colour to see in the sky as so many
@garyrice46105 ай бұрын
The red shows up nice. But I have heard from others the orange stands out best in the sky.
@wjb1116 ай бұрын
Not familiar with OMP. Any idea how they compare to Extreme Flight?
@garyrice46106 ай бұрын
Very light weight. Built very strong with cevlar reinforcements. As of now they only have the edge in two sizes. And a crazy airplane called the bighorn. More are coming soon.
@alwaysflying65405 ай бұрын
The quality is better than extreme flight. I fly both manufacturers
@monchichis33325 күн бұрын
For price value, performance, and quality, it gives extreme flight a run for their money on the 60" class. I fly mine hard and it holds up just like the extreme flight planes. I own both
@davidhall43987 ай бұрын
wow i cant believe you glued the landing gear pants to the fuse....if you break your landing gear you have made it impossible to replace. without damaging the covering.. normally these are just glued inside them to the gear only.
@garyrice46107 ай бұрын
It popped off on the third flight. I have now put them on with silicone.
@davidhall43987 ай бұрын
@@garyrice4610 That was lucky 👍 I've had loads of these planes 60 67in... I now don't use steel bolts to hold the landing gear on...I use 2 only M6 nylon bolts they break off nicely without damaging the fuselage extensively inside... 😉 Also I don't use steel bolts/screws on the wheel pants too...I use M3 nylon bolts screwed into captive nuts inside the pants this allows the pants to come off too... I fly off rough grass in winter but it's also handy if you have a deadstick or hard landing... 😉