‘On the rocks’ removable fake ice topper for tumblers tutorial

  Рет қаралды 57,966

DAM Fancy Creations

DAM Fancy Creations

Күн бұрын

Пікірлер: 157
@deidrebemister9209
@deidrebemister9209 Жыл бұрын
Awesome video! You’re a genius with that tea strainer I never would have thought of that. Thank you.
@damfancycreations
@damfancycreations Жыл бұрын
Thank you! Yes! I LOVE my tea strainer for my blends/ ombres!
@LostSiren13
@LostSiren13 Жыл бұрын
Beautiful blending on this tumbler. ❤ the finished results.
@damfancycreations
@damfancycreations Жыл бұрын
Thank you 🩷
@RNMEDIC1335
@RNMEDIC1335 Жыл бұрын
Love this. Thanks for making it step by step so us beginners can do it! 😊
@damfancycreations
@damfancycreations Жыл бұрын
Of course! Glad it helped!
@karolosteen3313
@karolosteen3313 3 жыл бұрын
Brilliant!! Love the use of the magnets on the lid!! So glad I found you!!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you!!
@sharone671
@sharone671 3 жыл бұрын
I love the idea of the topper being removable. This is a beautiful cup!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you!
@deanne1478
@deanne1478 3 жыл бұрын
Thank you for another amazing tutorial. I love the topper. Also, the birds in the background are so relaxing.
@damfancycreations
@damfancycreations 3 жыл бұрын
Your welcome! Yes! I recorded the outside one time and my followers loved it so now I record outside every time. :)
@debpoitz5374
@debpoitz5374 3 жыл бұрын
What a great idea to be able to remove it! You nailed this, so stinkin cute!!!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you so much!
@tinaholliman168
@tinaholliman168 3 жыл бұрын
I just found your channel. I love your removable topper!!! I will be attempting this as soon as my fruit arrives.
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you! I hope you find some tutorials you love. Have fun with the topper!
@thaliacrum3804
@thaliacrum3804 3 жыл бұрын
Stumbled upon your channel. Love this tutorial. Liked and subscribed!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks so much!
@linzimcmillen3460
@linzimcmillen3460 3 жыл бұрын
you made it so simple! thank you for sharing!!
@damfancycreations
@damfancycreations 3 жыл бұрын
Of course!
@juanitayoung7541
@juanitayoung7541 3 жыл бұрын
ABSOLUTELY LOVE THIS!!!!!!! Working on a tequila tumbler and plan to try this for the topper!!! Thank you so much!!!!
@damfancycreations
@damfancycreations 3 жыл бұрын
That sounds fun!!
@deborahschweikert4263
@deborahschweikert4263 3 жыл бұрын
Love this! Thank you for sharing. I wanted to try the fake ice but thought it might get old and the lid would have to be thrown away. With this application the lid can be preserved and reused.
@damfancycreations
@damfancycreations 3 жыл бұрын
Yes ma’am!
@teresaviramontes289
@teresaviramontes289 3 жыл бұрын
It's beautiful first time watching thank you for sharing 😊
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you. :)
@Britneymphotography88
@Britneymphotography88 3 жыл бұрын
Such cute cups
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you so much ☺️
@Britneymphotography88
@Britneymphotography88 3 жыл бұрын
@@damfancycreations your welcome
@bernicestocker4100
@bernicestocker4100 3 жыл бұрын
I just found your chanel and I must say I live it.
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you so much!
@elizabetholeson3492
@elizabetholeson3492 3 жыл бұрын
Love this! Thank you for sharing
@karenvallone5785
@karenvallone5785 3 жыл бұрын
Awesome tutorial. ☺️
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks so much ☺️
@laurie-lionessnotaewe5902
@laurie-lionessnotaewe5902 Жыл бұрын
The stone in your ring is STUNNING! Is it morganite? I love this cup! The topper is “over the top “! 😂 Sorry, bad joke. The colors in this design is GORGEOUS!
@damfancycreations
@damfancycreations Жыл бұрын
Haha thank you! And yes, it is! I wanted something ‘different’ for my wedding ring 🥰
@laurie-lionessnotaewe5902
@laurie-lionessnotaewe5902 Жыл бұрын
Beautiful choice! I looove morganite. 💜
@kamigarcia5179
@kamigarcia5179 3 жыл бұрын
Love it amazing, thanks for sharing
@MC-bj6kr
@MC-bj6kr 3 жыл бұрын
This was an awesome tutorial! Thank you so much for sharing!
@damfancycreations
@damfancycreations 3 жыл бұрын
Of course! Glad you enjoyed. :)
@ttoptina24
@ttoptina24 3 жыл бұрын
This is absolutely gorgeous 😍❤ thank you for sharing ❤
@sarahbethxoxo
@sarahbethxoxo 3 жыл бұрын
you always come up with the cutest designs! now i need a drink tho 😆
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you so much
@aliciat2216
@aliciat2216 3 жыл бұрын
That sounds like a great idea! drink and make a cup haha are those real birds in the back ground???
@damfancycreations
@damfancycreations 3 жыл бұрын
@@aliciat2216 right?! Yes, they are. I filmed one of my tutorials outside and every one loved how you could hear the birds vs just zero sounds or music so I record outside now!
@KP-nx8lo
@KP-nx8lo 3 жыл бұрын
I’d use UV resin instead of epoxy, quicker but just as strong. You can flash cure it so there’s no drips.This is great! Love the colors too. This would be great on a clear tumbler too! Make it look like there are fruits in the drink using the vinyl!
@damfancycreations
@damfancycreations 3 жыл бұрын
For sealing the ‘ice’? UV resin would be great to top coat but since I drip the epoxy inside the ice and seal all the cracks- the UV light wouldn’t reach those areas so the Uv resin wouldn’t cure.
@elizabetholeson3492
@elizabetholeson3492 3 жыл бұрын
@@damfancycreations i wonder if you used uv resin to apply the ice if that would work
@damfancycreations
@damfancycreations 3 жыл бұрын
@@elizabetholeson3492 possibly but hot glue is a lot quicker imo, with uv resin you would have to hold each piece in place for 60 second. Since I go back and epoxy all if the ice to fill in all the cracks hot glue is okay to apply it with. I would not fill the cracks with UV resin bc the light would nit reach the resin that woild be in between all the cracks and therefore would have uncured resin in there. Also- I did go back and remove and replace a few pieces- hot glue is easy to pop off, UV resin would be more difficult you needed to readjust something.
@erinrahal6428
@erinrahal6428 3 жыл бұрын
You are amazing!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you ☺️
@loragrant9495
@loragrant9495 3 жыл бұрын
Love this tumbler!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you!
@scrappinkochie
@scrappinkochie 2 жыл бұрын
Love this. Can you tell me did purchase the mold or make the coaster you attach the ice to??? TIA! Love your video. And subscribed to check out more 💗
@astariaeverett9215
@astariaeverett9215 3 жыл бұрын
Love this can’t wait to make mine
@damfancycreations
@damfancycreations 3 жыл бұрын
They are so fun!
@ladyg1150
@ladyg1150 7 ай бұрын
Hello. Did you sand your tumbler at all? Thank you for making this so easy! I am trying this on all my ruined tumblers
@damfancycreations
@damfancycreations 7 ай бұрын
Hi! I don’t sand my cups. I use to but when I had to strip a bunch of tumblers I realized that sanding doesn’t make much of a difference if you base paint your cups with a primer- which I do for all my cups.
@tiffanypownell326
@tiffanypownell326 3 жыл бұрын
So now I need a tutorial on how you made your fruit I have some ideas for tops and don't like anything I'm finding
@septinawillis31
@septinawillis31 3 жыл бұрын
Your tutorials are very easy to follow..Question: Do you use a mask when applying your epoxy?? Are your epoxies toxic??? Thanks for sharing..
@damfancycreations
@damfancycreations 3 жыл бұрын
Hi Septina! Thanks so much! Even though the Epoxy I use has zero VOC I do still wear a respirator. When you mix part A and B a chemical reaction occurs and releases fumes and you definitely don’t want to be breathing that in. It is always best to protect your lungs when working with chemicals like this. :)
@ChannelFiend
@ChannelFiend 3 жыл бұрын
I just stumbled upon your video. This is so cute!!! Can I make a suggestion or two? How about an ice cream or hot chocolate topper? Those would be cute too!!! Keep up the awesomely creative work!!!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks so much! I actually have several ice cream topper tutorials up in my channel. :)
@ChannelFiend
@ChannelFiend 3 жыл бұрын
@@damfancycreations Subscribed & searching for them now!!!
@luvmystewie
@luvmystewie 3 жыл бұрын
Awesome video! In this video, you used 2 different sizes of magnets, the taller magnet on the bottom, and the thinner magnet on the top, correct?
@damfancycreations
@damfancycreations 3 жыл бұрын
Yes, I use a mix of sizes depending on what fits the lid best. :)
@luvmystewie
@luvmystewie 3 жыл бұрын
@@damfancycreations Wowwwwwwwwwww! Thank you for such a quick response 🥰 thanks so much!!
@MyssAsh326
@MyssAsh326 3 жыл бұрын
Love your videos!! Do you happen to have a video on making your fruit?
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you! I don’t at the moment but may film it The next time I make some!
@jessicajrollo
@jessicajrollo 3 жыл бұрын
This is a great idea! Where do you get the "topper"pieces please? Thank you for your help!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks! What piece? The ice? I have everything linked in the description. :)
@jessicajrollo
@jessicajrollo 3 жыл бұрын
@@damfancycreations no I meant the piece you attached the ice to that you then attached to the lid, but I just realized you made it from the car coaster molds. Apparently I wasn't paying close attention the first time around lol. Sorry!
@damfancycreations
@damfancycreations 3 жыл бұрын
@@jessicajrollo haha no worries!
@tranikamason5281
@tranikamason5281 Жыл бұрын
Where did you get the tumbler turner??
@sherylward7380
@sherylward7380 3 жыл бұрын
hi i was wanted to know where i could find the fruit file. i love this tumbler
@somehow.i.manage.3977
@somehow.i.manage.3977 3 жыл бұрын
The birds are just as pumped as I am about this tutorial! 😂
@damfancycreations
@damfancycreations 3 жыл бұрын
Lol!! 😂
@nikkikoelsch542
@nikkikoelsch542 3 жыл бұрын
Love your video! I currently don't have a coaster mold bit want to try an ice topper. I heard you mention so.ething about using the lid as a mold. Is it really as simple as spraying it with a vegetable spray and pouring the epoxy in? Just pops out after its set? Thanks!
@damfancycreations
@damfancycreations 3 жыл бұрын
Not a lid! I cut a plastic cup and used the rim- go rid of part that would hold water, rubbed the edges with oil, set it on foil and poured thicken epoxy in. I measured the size I would need and cut the cup down to size and taped it so it would hold shape. I did set a heavy book on top to keep the epoxy from seeping out. I hope this makes sense- it’s nit the BEST method but if you don’t have a mold, it will work in a pinch!
@nikkikoelsch542
@nikkikoelsch542 3 жыл бұрын
Makes perfect sense! I kept going back to that part of your video trying to figure out how you did that with a lid! I'm ordering coasters now! Thank you again for explaining!
@tamikka09
@tamikka09 3 жыл бұрын
Beautiful 😍
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you!!
@borntobecrafty4585
@borntobecrafty4585 3 жыл бұрын
Nice video . A little bit of the subject, the back ground noise I could swear you live by my house. Every time I record I get the same exact background noise. Lol
@damfancycreations
@damfancycreations 3 жыл бұрын
How funny! I love all the birds around us!
@sherriethummel3475
@sherriethummel3475 3 жыл бұрын
Your work is always fabulous!! Can you tell us where you get your magnets?
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you! From Amazon- the listing I originally used isn’t active anymore.
@wendybuchanan3582
@wendybuchanan3582 3 жыл бұрын
I was wondering what size coaster mold you use so that it’s not visible? Your creations are amazing. I’m typically the silent admirer 💕💕
@damfancycreations
@damfancycreations 3 жыл бұрын
I either use 2.5 or 3” mold- depending on the lid size of the tumbler!
@blueroze27
@blueroze27 3 жыл бұрын
thank you for this tutorial! it's amazing! just wondering if you could explain your ending just a taaaad more. My fault for not understanding the epoxying of the magnets part. I understand epoxying them down, but got lost at the part where you put epoxy on top of the magnets and then put the topper on top of that to cure. How do you get them back off? thanks again!!!!
@damfancycreations
@damfancycreations 3 жыл бұрын
After the bottom magnets are epoxies to the lid you STACK the second set of magnets on top and then epoxy top of those, then place your topper. When the epoxy is cured you can remove the topper and two magnets will be epoxied to the top of the lid and two magnets will be epoxied to the bottom of the topper. Does that helps explain it a little better?
@blueroze27
@blueroze27 3 жыл бұрын
@@damfancycreations very much so!! thank you so much!
@saralawson4467
@saralawson4467 Жыл бұрын
I want to get the svg u use on that tumbler
@ShawneesJourney07
@ShawneesJourney07 3 жыл бұрын
For clarification. You use the CCDIY regular artist resin. Not medium viscosity or thin. Just plain artist resin?
@damfancycreations
@damfancycreations 3 жыл бұрын
I use Fast Set and Artist Resin. I do have medium and thin viscosity as well but I prefer the thicker formula of Artist Resin. If you like a thinner formula I would go with medium viscosity. :)
@ShawneesJourney07
@ShawneesJourney07 3 жыл бұрын
@@damfancycreations thank you
@karijohns8141
@karijohns8141 3 жыл бұрын
How did you apply your glitter? Little holes in the bottom of the med cup?
@damfancycreations
@damfancycreations 3 жыл бұрын
I mention in the video that It is a tea strainer, it is shaped like a medicine cup though haha!
@cathymurphy9001
@cathymurphy9001 3 жыл бұрын
Great tutorial like always! What do you use to color the fruits when you make them?
@damfancycreations
@damfancycreations 3 жыл бұрын
Of course! I use either micas or inks depending on the fruit.
@daroyalboutique
@daroyalboutique 3 жыл бұрын
Can you use fast set to adhere the magnets or is this a bad idea
@damfancycreations
@damfancycreations 3 жыл бұрын
Definitely, I actually started using UV resin!
@daroyalboutique
@daroyalboutique 3 жыл бұрын
@@damfancycreations thanks for your help
@Nileenadash
@Nileenadash Жыл бұрын
How do you make sure the hole for the straw is not covered with epoxy or ice?
@damfancycreations
@damfancycreations Жыл бұрын
I just place everything carefully and watch where I drizzled the epoxy after :)
@cherylmasters3116
@cherylmasters3116 3 жыл бұрын
where did you get the harvest peach spray paint can't find it anywhere to buy
@damfancycreations
@damfancycreations 3 жыл бұрын
Walmart
@cherylmasters3116
@cherylmasters3116 3 жыл бұрын
@@damfancycreations thank you will check there
@bellala5713
@bellala5713 3 жыл бұрын
This is a great tutorial!!!! 😍 Where did you get the coaster molds? I want to make sure I get the right ones. Thank you!!
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks! I have several different car coaster molds so I’m not sure where these came from... may have been CCDIY. Just look at the sizes- they are pretty much all the same other than that. I want to say these were about 2.5 inches.
@bellala5713
@bellala5713 3 жыл бұрын
@@damfancycreations thank you so much! 😊😊
@coochiepeppa
@coochiepeppa 3 жыл бұрын
I’m really curious out how you made the base without a mold.
@damfancycreations
@damfancycreations 3 жыл бұрын
I just used some plastic I had and sprayed it with pam/oil to keep the epoxy from sticking.
@BrookeTannehill
@BrookeTannehill 3 жыл бұрын
Where do you get your straws from? They are so freaking cute!
@damfancycreations
@damfancycreations 3 жыл бұрын
I get them from Etsy or Amazon!
@Franseeeen
@Franseeeen 2 жыл бұрын
I worry that if someone leaves their tumbler in their car, the heat would soften the wax from the hot glue gun and the ice topper would fall apart? 🤷🏼‍♀️ Is there a different glue that could be used?
@damfancycreations
@damfancycreations 2 жыл бұрын
I seal everything with epoxy. The glue is just to hold the rocks on until I epoxy. I recommend sealing ever crack with epoxy so water can’t get trapped a d mold start to grow.
@kmahy1
@kmahy1 3 жыл бұрын
Ok, you use 4 10x3mm magnets correct? I didn't see where you used the 10x5mm. I'm trying to get all my supplies together and want to make sure I get the right sizes.
@damfancycreations
@damfancycreations 3 жыл бұрын
I typically use 2 10x5 and 2 10x3. The 10mm is the diameter, not height. :)
@kmahy1
@kmahy1 3 жыл бұрын
@@damfancycreations yes I know. Do you the 5mm on the topper part or the lid? Is it so you clear the slider?
@damfancycreations
@damfancycreations 3 жыл бұрын
@@kmahy1 I do either or. I usually measure by holding the topped onto the lid with the magnets just set on top so I know which sizes work best. :) I use two different sized magnets so I have options for different lids.
@kmahy1
@kmahy1 3 жыл бұрын
Ok,.thank you
@ShawneesJourney07
@ShawneesJourney07 3 жыл бұрын
@@damfancycreations so you dont actually NEED two different size magnets? Its just a preference for you.
@Miranda.Teague
@Miranda.Teague 3 жыл бұрын
Where did you find the fruit svg for the vinyl?
@damfancycreations
@damfancycreations 3 жыл бұрын
They are files I have had for years and edited them. I don’t know where I got the original files but I’m sure they have option in Etsy or other sites like creative fabrica/ creative market. :)
@missyrichert1015
@missyrichert1015 3 жыл бұрын
Do you have a videos of how you create svg by hand?
@damfancycreations
@damfancycreations 3 жыл бұрын
I just draw them on my ipad- it does take a good bit of practice bc you basically have to learn how to write different. There are several videos on KZbin on Procreate (the app I use). :)
@jessicamayes7601
@jessicamayes7601 3 жыл бұрын
Do you happen to have a link for the 10x5mm magents I'm looking on Amazon and for the life of me can not find them I'm going crazy. Lol
@damfancycreations
@damfancycreations 3 жыл бұрын
I just looked and I don’t see them either- these have blown up the past couple of weeks so they may be out on Amazon. Maybe try Ebay?
@jessicamayes7601
@jessicamayes7601 3 жыл бұрын
@@damfancycreations thank you 😊
@donnaball1576
@donnaball1576 3 жыл бұрын
I absolutely love your videos and the tumblers you make. I have one request at the very beginning of your video could you please speak up a little louder it is difficult to hear you. Thank you please don’t take this as a criticism, I really enjoy your videos.
@damfancycreations
@damfancycreations 3 жыл бұрын
Thank you! Hmm I wonder why?! On my devices/ computer it is pretty loud even on medium volume. Is your volume turned up all the way?
@lovelyt-rex1999
@lovelyt-rex1999 3 жыл бұрын
How easy or hard is it to change the tops? I have been trying to figure out how to change toppers for like 6 months but always come back in my mind "how do they get the top off? If I use magnets how easy will it be to pop on and off?"
@damfancycreations
@damfancycreations 3 жыл бұрын
It’s really easy. I tell customers to twist the topper until the magnets detach from each other and thats it!
@veevz13
@veevz13 3 жыл бұрын
How can I make this removable lids but for Mason jars??
@damfancycreations
@damfancycreations 3 жыл бұрын
I would drill a hole din the middle of your car coaster or mold that matches up with the straw hole and add thinner magnets to the lid and topper the same way I do for these. :)
@veevz13
@veevz13 3 жыл бұрын
@@damfancycreations thank you. And thank you for replying.🙌 Hopefully doesn't look bulky or too lifted from the lid lol
@damfancycreations
@damfancycreations 3 жыл бұрын
@@veevz13 of Course! I think if you get thinner magnets- like 2mm- it won’t look so noticeable!
@tereesahamlin3179
@tereesahamlin3179 3 жыл бұрын
Where did you get the fruit file for your tumblers. I love the strawberries.
@damfancycreations
@damfancycreations 3 жыл бұрын
Thanks! These are files I have had for a while so not sure where I got them from. I do have a subscription to creative fabrica and creative Market so they could have been from there. I did trace them and deleted the center so they didn’t look like this in the unaltered file. :)
@antoniolewis3871
@antoniolewis3871 3 жыл бұрын
Where did you get your fruit from?
@damfancycreations
@damfancycreations 3 жыл бұрын
Everything is linked in the description.
@antoniolewis3871
@antoniolewis3871 3 жыл бұрын
@@damfancycreations thank you for your quick reply. You did a beautiful job on that tumbler.
@damfancycreations
@damfancycreations 3 жыл бұрын
@@antoniolewis3871 thanks so much. :)
@tammydavis8331
@tammydavis8331 3 жыл бұрын
I like it better without the milky way but it's still a unique idea.
@damfancycreations
@damfancycreations 3 жыл бұрын
That’s the great thing about tutorials, you can take bits and pieces that you love and leave the rest. :)
@angelpetrie3746
@angelpetrie3746 3 жыл бұрын
Do you or would you consider selling already made tops? I don’t care to epoxy after but I like the idea of it being sealed 🥰
@damfancycreations
@damfancycreations 3 жыл бұрын
@@angelpetrie3746 I have had several people ask me this! At the time I am just selling them together. I may offer the toppers only down the road. :)
@morrisabrown7470
@morrisabrown7470 3 жыл бұрын
Was on website didnt c this file
@damfancycreations
@damfancycreations 3 жыл бұрын
It’s not up yet! This is the newest file I have done so I need to sit down next I have time and convert it to an svg and upload it for you guys. :) should be soon!
@Julie-yc6vs
@Julie-yc6vs 3 жыл бұрын
@@damfancycreations Are they done yet or am I missing them...LOL
@bigguyvending
@bigguyvending 3 жыл бұрын
I miss talking with you
@damfancycreations
@damfancycreations 3 жыл бұрын
Hey! How have you been?!
@bigguyvending
@bigguyvending 3 жыл бұрын
@@damfancycreations Just missing my friend. Added vending to my list of hustles.
@dianalege3863
@dianalege3863 3 жыл бұрын
How big is your round mold you use to set the “ice” on?
@damfancycreations
@damfancycreations 3 жыл бұрын
The one I made is about 2.5 inches- my car coasters are a little larger. I might see I ca find some car coasters in different sizes and just use those!
Rocky road ice cream scoop tumbler tutorial- detachable
44:42
DAM Fancy Creations
Рет қаралды 18 М.
Snow cone tumbler tutorial l DAM Fancy Creations l shaved ice tutorial
41:33
DAM Fancy Creations
Рет қаралды 26 М.
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 170 МЛН
Serape tumbler tutorial with inks and power wash
26:27
DAM Fancy Creations
Рет қаралды 9 М.
DAM Fancy Scoop tutorial- removable ice cream scoop topper for tumblers
23:09
UV Resin Removable Magnetic Lid Topper Tutorial
26:43
Lovely Lou Lou Designs
Рет қаралды 27 М.
Ice Tumbler Lid Topper
14:22
HayleyBug Art Studio
Рет қаралды 8 М.
Fake Ice Topper: How to Make a Fake Ice Topper for a Sublimation Tumbler!
30:52
Vintage | Antique Inspired | Aluminum Foil Tumbler Tutorial
9:31
Everything Tumbler Tutorials By Rebecca Escott
Рет қаралды 33 М.
Over The Top-3D Toppers
23:29
Mr. Nola's Glitter
Рет қаралды 58 М.
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 170 МЛН