Meet the new Saturn 4

BUYMEACOFFEE - buymeacoffee.c...
PATREON - / onceinasixside
KZbin - / @onceinasixside
Affiliate Links
Elegoo Saturn 4 (Direct): shrsl.com/4kkxv
Elegoo Saturn 4 (Amazon): geni.us/ZV0tQ4
Elegoo Saturn 4 Ultra: shrsl.com/4kgzz
Nova3D FastCure2: shrsl.com/4kouo (expensive AF!)
Anycubic Wash & Cure Plus 3: shrsl.com/4jg1n (Great value!)
Anycubic Mono M5s Pro: shrsl.com/4dpud
This months STL Donors - go give these legends a follow!
Kickstarters
Dungeons & Dreadnoughts Planar Portals: bit.ly/4bTE7em
Dao Miniatures Sunforged Legion: kck.st/3yTO6BT
Arcane Whiskers - www.myminifact...
Artificers Mini - www.myminifact...
Dungeons & Dreadnoughts - www.myminifact...
Imp3dSion - www.myminifact...
Lucas with a C - cults3d.com/en...
MOID - www.myminifact...
Neoteric Miniatures - / neotericminiatures
Skulltown Minis - www.patreon.com/SkulltownMinis
Smuggler Boutique - www.myminifact...
Traktor Minis - www.myminifact...
Other Mentions from the Video
Fume Extractor Adapter:
NEW Fume Extraction V3: makerworld.com...
GeekDetours Video: • Saturn 4 Ultra: the Be...
Uncle Jesse's video: • How is this only $300?...
M I N I R A T E R
www.minirater....
My Music Channel 🎵
/ @onceinabside

[@ElegooOfficial]

Alright, alright, we've heard you loud and clear! We're more than happy to send a brand new Saturn 4 ULTRA to Mr. Once in a six side. We've already DM'ed him, hoping for a prompt response to accept the review unit. Can't wait to see the Saturn 4 ULTRA on this channel!🙃

[@OnceinaSixSide]

Hey look that's great and all but do you hear us about the firmware? Are calibration and recovery on power loss features able to be ported over to this machine? That would honestly be more exciting for everyone I think, and I'd rather make that video.

[@kurtryankoch7356]

This is why I watch you real solution suggestions to real issues we have as 3D printer hobbyist Im in the market for a new resin printer after my mars 2 pro killed another lcd absolutely using your reviews to make my next purchase

[@mitcho590]

I was going to buy a saturn 4...nope not even an option now since the exposure thing is a deal breaker for me lol

[@leobro6398]

​@@OnceinaSixSide I respect you alot for not instantly backing down just for getting a review unit of the Ultra. Some channels might would have done that

[@thrrax]

Send me one too, maybe you'll convince me to give up Anycubic.

[@crispy_338]

Gotta say, you’re quickly becoming my favorite printer reviewer. These long form no BS reviews going through quality of life and little details is what most people skip over. The chill delivery and slick presentation really sets you apart from everyone else. Appreciate your vids man. Keep it up 🤙🏻

[@OnceinaSixSide]

Appreciate that! 🤘

[@nobirdsnomasters]

Same. I prefer your style of real life walk through over scripted waffling any day.

[@themadhater9003]

Oh shit I left when the patreons rolled didn't realize there was 30 minutes left, literally thought he was so pissed he was like fuck it buy me a coffee.

[@ThroatJunk]

Give this man an ultra elegoo. I won’t buy one til he says they’re not shit.

[@nasigoring1525]

100% the same.

[@schmiddy8433]

Elegoo i need to see the saturn 4 ULTRA on this channel!

[@Rocknoob49]

No we need them to bring the calibration tool to this firmware.

[@schmiddy8433]

@@Rocknoob49 the ultra has more than calibration, the biggest new feature is the tilt release.

[@RoseKindred]

Two videos in one day? The All Mighty Rabbit has blessed us again!

[@chuck2703]

Praise be 🙏

[@spencerarnold669]

We want to see the ellego saturn 4 ultra on this channel. This guy literally is dying for the multi calibration. Give it to him ellego. If anyone will champion this feature its this man!!!

[@OnceinaSixSide]

Truth 😂

[@nobirdsnomasters]

Seems like every machine should have the exposure test as standard, it just makes it easier for everything and everyone.

[@OnceinaSixSide]

We'll get there eventually!

[@KolMan2000]

Watching this man leave a permanent scrape in visible spots of stuff to see if it’s plastic or metal is hilarious

[@themadhater9003]

The jerryrigeverything of resin printers, at least it still works.

[@martinmckee5333]

I suggested the Saturn 4 Ultra for work. My boss decided to "save money" by buying the Saturn 4. Now he gets to pay me to do several hours of calibration prints to then test several resins for production. It's gonna be a boring week.

[@GeekDetour]

@OnceinaSixSide OMG! I heard the sweetest sound ever right after 12:42 ... "Geeeeek Detooouur" 🤣 Oh man, I know how it feels. I had reviewed the Saturn 2, then when Elegoo launched the Saturn 3 and Saturn 3 Ultra, I was super excited about the Wifi feature - then Elegoo sent me the regular 3. It feels a bit "whuooo whuoooaahh" when the cool kids get to review the super hot stuff and you get to review the 2nd hot stuff 😂 You are right, the Exposure Test Tool should be in ALL printers now. It is essential to start printing with a new resin you never used before. Thanks for mentioning my review.

[@OnceinaSixSide]

That Geek Detour guy makes some pretty neat videos! 😁

[@GeekDetour]

@@OnceinaSixSide He does... Thanks! I mean, he might appreciate if he ever reads this. I read somewhere that he struggles to make the videos. But that's just a rumor.

[@nobirdsnomasters]

The ultra is what I want you to go over with an angry comb.

[@Katazo98]

Please Elegoo send this man the Saturn 4 Ultra. He will love it, if not it will make Great content

[@formicarufa7943]

Hi ! Electronics technician here. I have a supposition as why only the Ultra has the range exposure calibration. You see, in embeded development, firmware is often deeply tied to the hardware you are developping for, and you often can't simply port features to another machine like you would do on a PC. I'm pretty sure the ultra needed quite the hardware refresh, with the camera (video is a lot of data for small microcontrollers) and the wifi (often directly integrated inside the chip). That probably meant recoding/porting a big part of the software was needed anyway. Considering the load of work that had to be done, they probably tought it would not be worth spending development time to develop in parallel these features for the non-ultra, considering next gen printers will probably run on the new microcontrollers anyway. Reskining the old software and adaptating it to the new sensors/screen would be way faster. So yeah that sucks for the non-ultra buyers, but it's understandable and definitely not as simple as "just give it the same firmware as the ultra". And it's highly unlikely to come during it's life cycle considering it's probably an old platform now.

[@OnceinaSixSide]

That makes a lot of sense! But even so I feel I have a duty to kick up a stink about this, and especially so in this case where they're debuting two nearly identical printers. I will not rest until all manufacturers are giving us calibration tools all the time 😂

[@MrPetersVideo]

Yes, but this calibration stuff is SIMPLE coding to implement, as has nothing to do with any other aspect of the printer (camera etc). It is just incredible that almost no manufacturers have included this super simple function to ALL printers! It is just ludicrous. And to do it on one 'higher' version and not its 'brother' is even dumber!!

[@formicarufa7943]

​@@MrPetersVideo It may seem simple, but I belive it's really not. Adding a menu to do a masking test or to control the Z axis is easy. A range exposure test needs to quite heavilly modify the way it prints, wich is way harder if the "printing subroutine" was not designed with this option in mind. Read bellow if you want details on why. I see two main problems that could be a huge wall to implement the feature. Timing, and data transfer. First, timing. Microcontrollers handle time sensitive tasks with "timers" (hardware counters that increment at a chosen speed) on these timers, you can set up interruptions, that will automatically check if the value of your timer is equal to a chosen value and stop the curent program running to run a bit of code of your choosing. Well the first problem is simply that timers are not unlimited. Since they are hardware, you often have one, two, four or eight of them, rarely more, and each has a limited number of channels and interrupts you can have. So, here, if the delay between turning the screen on or off is handled by two interrupts on the same timer, here you might not have enougth interrupts available. Or you could try to keep reconfiguring the interrupt timing on each screen change, but that would be messy and pretty hard to maintain probably. Kinda like juggling with a hammer, a saw and a screwdriver while woodworking because you don't have a belt to store them. The second problem is data transfer. Small microcontrollers have a small ram, and big data transfer (like video) are a challenge. Even a 12K raw image is a challenge ! Fortunately, some really smart people invented the DMA (Direct Memory Access). To keep it simple, it's a peripheral (so not processed by your computer core) that you configure once, and then, on a frequency will scrape data somewhere and put it somewhere. This somewhere can be another periferal (a signal generator for example), a remote data storage (an sd card), an output (a display driver) or even a section of the RAM. That's a wonderfull way of mooving around a big amount of data. The problem is that with a calibration routine, you need to turn on only part of the screen. And 99% of screen drivers won't let you actually modify only part of the display. So, if the slicer doesn't provide you multiple images per layer (wich would require to modify the slicer, and would multiply the file size by as much object you want in your range test) you will need to modify these images on the fly to black out some parts of it. That means loading it in the ram (maybe you don't have enougth ram to begin with) and creating a copy you can then send. And this copy must have up to 75% of it's pixels forced at 0. Assuming an 12Kx6K image with 1 bit color (so not even able of antialiasing), 75% of the image would be 6.75 milion bytes. Running on a microcontroller at a few tens of MHz that is far from a trivial opperation, and on short intervals for your callibration could definitely cause issues. So yeah, not that easy.

[@rustyshaklford9557]

Do the base model and ultra even use different controller boards? I'd be willing to bet they just remove that feature from the base model firmware to differentiate the product lineups. Car companies do this shit all the time, I can't imagine Elegoo wouldn't.

[@formicarufa7943]

@@rustyshaklford9557 No doubt from me. One doesn't have wifi (and has not the cutout for the connector on the side), no camera, a different front screen, and a different firmware. It would be really odd to have a mechanically identical printer (except for the tilt release, but that's only a stepper motor and a few laser cut/cast metal part, not enought to justify the price difference). Most of the production costs from car companies are mechanical parts, raw materials, R&D and certifications, small side features are not really expensive. In consumer electronics, design is quite cheap. What makes the bigger difference is the price of the components of the total assembly. A good example in a similar case would be the main board of the bambulab x1c and p1p/p1s. Even tho one is the stripped down version of the other, the few dropped electronics peripherals (an LCD touch screen replaced by a monochrome screen and button, and a lidar sensor) they redisigned the main board and changed the microcontroller (wich caused minor issues elsewhere, like for example the camera framerate stream being limited at 3 fps and the object skipping feature getting a delayed release).

[@kamilrozanski2546]

waiting for my Saturn 4 Ultra

[@doombringer4519]

Honestly the Ultra is such a good deal at the price it's at, idk why you would buy a 4 unless you wanted multiple

[@Bobby11]

Without the tilt there are better and cheaper saturn 4 alternatives

[@themadhater9003]

@@Bobby11 Like what, I really would like to know, since I'm in the market. Need to replace a 7 year old resin printer.

[@zackvirgo3597]

What ones would you recommend? I am likely getting a new printer this summer and t he 4 Ultra was what I was looking at

[@themadhater9003]

@@zackvirgo3597 Honestly GKtwo, 4 Ultra and M7 pro are the ones I've been looking at. TBH anything is an update from this wanhao d7

[@loken9124]

I'll be waiting for the GK3

[@jasoncombs3232]

I have the S4 Ultra and its been running non stop since I got it. I can't reccomend it enough. It burns a layer every 5 seconds. 2.1 to burn a layer, and 2.9 seconds to do the tilt. Its a game changer.

[@1989denver]

Quick question. What curing Machine should one use for the Saturn ultra 4?

[@jasoncombs3232]

@@1989denver any of them work fine.

[@mortcog4767]

It's insane that printers don't have the exposure finder, my AC Photon had it. The worst part about testing new resins in the print shop is exposure finding.

[@f0x4nn3]

I agree Elegoo please add calibration also to the normal Saturn 4, pretty sure it makes you an extra few sales!

[@alexgibson7960]

I was dozing off and the music almost gave me a heart attack

[@javierramosfuster5933]

totalmente de acuerdo con su enojo , me parece muy importante que tenga el test y mas que todo la protecion a corte de luz es algo tan insignificante de hacer en una actualizacion ademas que es de suma importancia y mas para la generacion actual de impresoras . Gracias es el mejor que e visto de hoy en adelante me veo todos tus videos

[@UriskOfTheFae]

I'm glad for a chance to see a review of the regular Saturn 4. Most people only review the Ultra, it seems

[@jormungand72]

as someone who paid the extra 100 for the exposure feature... yeah, it should be a thing on every resin printer, no matter the price.. its firmware.. its not hardware. all it takes is a slight modification to the firmware. that said, I wouldnt be surprised if someone released their own custom firmware that added this feature to the non ultra.

[@clb1024]

I'd love that feature. I'm going to start my very 1st resin print sometime this week. I'll be using a Creality Halot-Sky.

[@Old_Wizard_Minis]

All of the printers should have this feature. Hell there should be a software update for my saturn 2 to do it. I did order the Saturn 4 ultra because of the tilting bed. The calibration tool should be default from all manufactures from here on out.

[@nexo9602]

Elegoo pls give this man a printer collaboration (Elegoo+Once in a Six Side) Edit: He knows what he's doing.

[@Starganderfish]

Quick question, how does the screw placement on the Elegoo Saturn VAT compare to the Anycubic 5S Pro? I have the M5S Pro and the one downside is the the lack of a pour spout on the vat. It would be really cool if the Saturn vat worked on the Anycubic. Note on the Elegoo Mini heater they're releasing - it's not temperature adjustable - "The Mini Heater's automatic heating function intelligently engages below 25℃ and disengages above 25℃". Personally, I like to be able to crank the heat up more for faster heating or adjust for different resins. Also, Kudos to you for proper testing. I think you're the only reviewer I've seen willing to scratch the machine to check materials, stick a hard object on the LCD to test the emergency stop, disassemble the plate to see the fixings etc. Excellent job!!

[@OnceinaSixSide]

Ah I did not know that about the heater! Yeah that sounds less than ideal. I like blasting the Anycubic one at its max setting of 40c. Also I just checked and the vats are sadly not interchangeable :(

[@seeya20743]

Now I wish my Creality didn't have such a great handle. Those handles are so cool.

[@skylineg6618]

It just baffles me the ultra uses the cheap looking grey with white accents and the cheaper version uses that almkst glowing premium green. Even the swivel looks better on the basic 4.

[@buzzardb]

Cant wait for my Ultra to arrive, going to be such a massive upgrade. Wish the Ultra was green too though.

[@briandicinti9535]

I feel the same way! Love the green! An option to pick the lid color would be nice.

[@pablogallardo5100]

Elegoo anycubic uniformation please give this man all your resin printer!!!! He is the chosen one!

[@BarokaiRein]

That build plate looks like a fucking nightmare. I just recently made a complaint to stationforge for their ork bomber, which had the hollow shells face any direction that wasn't the build plate, meaning resin poured out of them when I went to remove the plate. I can only imagine this build plate doing the exact same thing, but with every damn print.

[@TheSkyCactus]

You’d have to get a magnet plate, which i’m fine with. I’d rather have the self leveling

[@FlaccidGnome]

I really like mine minus not having the rerf feature. Apparently they address the regular one not having rerf in the FaQ on the website. I can't imagine why they could include it. Maybe in a future firmware update.

[@OnceinaSixSide]

Just read the FAQ and there wasn't a single mention of it 😞

[@FlaccidGnome]

​@@OnceinaSixSideSorry it's under the answered questions at the bottom of the Saturn 4 page.

[@OnceinaSixSide]

@@FlaccidGnome I'm struggling to find it 😅

[@FlaccidGnome]

@@OnceinaSixSide Sorry, I pinned it to the discord in general chat.

[@FelipeAsprillaO]

At 27:30 this is the reason I dont like this printer, too much resin mess in the build plate. I also notice Elegoo did send the ultra first to some KZbinrs. Doing some research it seems Elegoo did send version 4 to those with less than 50k subscribers. Except Uncle Jessy he has both models

[@JerC838]

Love my Saturn 4. One of the easiest models to use. Not a single failure in over 150 runs thus far.

[@peterpeter5666]

LOOKING to get my first resin printer in the next two months , just to print med to large figurines to paint once in a while. im considering this machine , the ultra and the anycubic mono7 which im waiting for reviews to start poping up and people to actually buy them to see real world usage

[@bonesaw1996]

Elegoo give this good sir an ultra to review please. at this point ive been watching for a while and have greatly took the straight forward reviews into every consideration for my current printer which is saturn 2. im super stoked for the new features that the ultra offers but i want to hear every possible hassle i could run into if i do purchase it. as for the channel tho you keep doing the best work and feeding us such amazing content and reviews praise be you and the bunnies

[@KriegerKatze]

I just realized today that the paper funnels are liners. I tried using them as a funnel by themselves. That didn't work obviously lol. And I thought they were useless. The more you know

[@MrPetersVideo]

14k has 'square' X/Y voxels, and 12K has rectangular ones. eg Saturn 3/4 at 18um X 24uM (rectangles). But they are all so fine (small) that the rectangles are not that critical (but is still not as 'nice' as a square!).

[@Adam_Lynn]

I bought the M5S PRO based on your video about 3 months back and I'm super happy with it. My main small issue is it seems to get a film of resin inside the top cover. Not sure if its because i'm constantly running the heater but with several thousand hours of printing time under its belt and the spare screen i bought still in its box it was a fantastic buy. Moved over to Sunlu ABS like after your video the other week and I am blown away at how good a resin it is and how goddam cheap it is compared to some of its competitors. I've tried the clear and grey resin so far and both are super bendy and durable unlike the brittle Anycubic resins I tried.

[@OnceinaSixSide]

That's great! The m5s pro + Sunlu abs-like is a phenomenal combo. Happy printing 🍻

[@MoonWind32690]

My ultra has been mind blowing. The calibration tool on the ultra is so fricken helpful!!! Hope you get to take a crack at the s4u soon.

[@BrushpointJ]

absolutely insane that the RERF is exclusive to the 4U, absolutely insane. i get the tilt-release hardware stuff, but the RERF feels inexcusable to leave missing. I SERIOUSLY hope that the do a firmware update to give it to the regular S4s. Great review as always. You've got my favorite videos in 3d Printing Miniatures space, long form and no filter, telling us how it is.

[@redline3090]

Please test Nova3D's "Mecha" Resin - water washable. ABS-Like. I am having good results with this and almost as durable as Wargamer resin.

[@Darski710]

Elegoo, we need to see a Saturn 4 ultra here!

[@LordNerfherder]

A resin printer without a built in calibration is a braindead miss by bad salesmen making the choices for the printers instead of people actually using them. It's a disease in the business. Our input matters. We need calibration. We want them to be easy to clean. These printers are bad because noone who had a brain actually tested these and supplied constructive criticism during the testing of them. Any hobbyist would have noticed this immediately and asked for it to be fixed over spending the marketing dollars tinting the glass and other garbage. We want printing quality, QOL and utility. Nothing else.

[@nasigoring1525]

Not going to lie, I’m just not going to buy a printer without that calibration set up tool. I love my elegoo Saturn 2 but it’s dialled in for sirayatech fast and I won’t change it now because i dont have the hours required to calibrate new resins based on temp, FEP ware etc. Maybe the ultra is the way to go? But I want to see it in mass use before I buy the new tilt function.

[@mitcho590]

Man i wish this was the ultra. I cant find answers to my questions 🤦‍♂️🤦‍♂️ people say the tilt ststem gives you 2x the speed but it doesnt seems to be that much faster? I wish elegoo put a holder for the plate like the mega 8k s has so you can let the resin run back into the tray Also how often do you need to replace the lcd screen?

[@abovewongart]

The M5s pro is fantastic but I've been using the new M7 Pro more.

[@OnceinaSixSide]

I'm keen to have a look at that printer too, I hear it's fast! How do you find the two pumps? Is it a pain in the ass to change out resin?

[@abovewongart]

@@OnceinaSixSide Honestly I dont like using resin pumps. I just rather pour it out myself back into the bottle

[@yodatreat]

Didn't expect you to wear a grudge like a crown. I'm currently awaiting the Saturn 4 Ultra as my 2018 Mars has given up the ghost.

[@SetaDragon]

Elegoo, give the guy the Ultra, or are you scared that anycubic will beat you with their pro?

[@haukke]

I bought this printer and took it out added resin and a sliced file hit print and everything it printed since that day was perfect.

[@Goreface9]

Damn it now i'm gonna spend all day listening to Tool on loop

[@Aztechnology.]

Oh blessed day lol. I’m still waiting on my 4 Ultra. Honestly the communication about my printer has not been great (preordered in April). I have no idea when it’s supposed to come. Been having issues on my Saturn S so I’ve stopped printing other than FDM for the time being. The random choice to not include the calibration tool on the 4 is a crap anti consumer move.

[@DevilsBrushGaming]

OK at the moment I had to contact elegoo 😢😢😢 my fep sheet got a hole first print and my build plate has cracked. Half way though making a review video all happy and excited has quickly gone down hill

[@manuelkarlinger1272]

Such a detailed review on the Saturn 4. Elegoo give him the ultra!

[@ronnyspanneveld8110]

Should turn all the lights off makes it look better, but thats okey since we cant see anything anyways :P

[@InTheRedShirt]

who designed that buildplate???

[@JackOiswatching]

The Patreon plug got a chuckle out of me. 'SIR.'

[@nasigoring1525]

What’s with these new build plates? They look like a nightmare to clean and a great way to waste resin.

[@nonamo5700]

For Voxeldance, they now have an activation option where you put in the code off the machines info label on the side

[@edwardnoise1899]

Tool is one of my favourite bands jesus Christ I was grinning hearing that

[@christiangruening352]

Master give dobby a sock? (Also rock on!!!)

[@BryceStinemetz]

I am screaming!!! Please stop just scratching it😭😭

[@JameTek]

It's mind boggling that Elegoo gimped their printer like that. Why? Good for Anycubic, at least.

[@nonamo5700]

Without built in exposure callibration, I don't see much reason to upgrade from my current printer. Total swing and a miss, just seems like they left it out of the firmware to upsel the ultra - which is BS

[@wombora]

SO next video is best resin for 3d printed guitar picks?

[@tylerhenry4439]

Was so hoping to see the ultra I've got one pre ordered and would love to here your thoughts on it

[@802Garage]

Some time stamps would be wonderful!

[@Politov]

So, from the intro, it seems like elegoo needs to send you a 4 ultra... to test those new features the 4 lacks...

[@wh1zz_b4ng]

I received my Saturn 4 at the beginning of the week and I love it. I’m coming from a Saturn 4K so it’s a game changer for me. Tang slicer is currently broken for the Elegoo users but I’m gonna stick with Chitubox for now.

[@ComradeJehannum]

Like smashed, it's the best I can do at the moment.

[@jimhavoc]

My 4 Ultra is arriving within an hour. We need to see it on this channel! Thanks for the great work! [Edit] It just arrived, and it is indeed shameful that they didn't put the calibration tool on both models. It seems like an easy update.

[@ChitosVids]

Really loving the way these vids review machines and calling out the BS. Would love to know which machine is your pick at the moment?

[@OnceinaSixSide]

Cheers! I'm gonna sound like an Anycubic shill but honestly it's the Mono 2 for a small/starter printer, or the M5S Pro if you want all the latest bells and whistles + a bigger build volume.

[@ChitosVids]

@@OnceinaSixSide doenst seem like you have a vid on the M5S pro. i looked around and seems there where issues with it at launch but an overall good machine. Any chance you could do a followup vid on it and what its like today? pretty please

[@bogatyr2473]

The lack of calibration tool built in is just starting to be stupid. Swapping resin on my Saturn 3 is basically a day long process of printing calibration items over and over and usually just giving up at good enough.

[@briochie]

I don’t understand the issue with the lack of resin exposure configuration in the firmware. It’s this done in chitubox in software for elegoo printers?

[@azuritet3]

I wonder if the UV exposure thing is patented.

[@sparkysadsup]

smh elegoo give the man the saturn 4 ultra

[@Crushonius]

@Elegoo you better LISTEN to this man because he is one of us and represents our voices loud and clear like only a true aussie can , swearing included because that is how we all talk when companies pull sh** like this sorry not SORRY , you need to do better there is no reason for the normal saturn not to have the calibration feature and you know it damn well . Give the people what they want in a firmware update asap and get him a saturn 4 ultra for comparison

[@1738Creations]

Wouldn't recommend anyone get the ultra until the tilt release system has been proven over a few months. Sounds like way too many things to go wrong. Don't be drawn in by the price. Let others waste their money first. There are always sales. There have been reports of damaged screens only on the Ultra models which Elegoo are saying are just production errors. Seems weird it's only the Ultra ones though. People are theorising it's the tilting causing strain of the connector or possibly the spring loaded pressure on the screen required by the tilt mechanism. My only printer is an old mars 2k so was looking to upgrade. Think I'm getting this one over the ultra. Print speed isn't a problem if it means reliable prints. Can leave it on overnight like with my current printer. I don't want resin sloshing around inside the vat, no good will come of that. The idea of a flat plane moving down and pushing resin out in equal amounts sounds more intelligent to me. Don't want lots of moving parts on my budget home devices either. These aren't industrial machines but people treat them as such.

[@sinithwar8991]

5:20 really hurt, you could have just used glue and a magnet. Then you could swap out handles. N52 or N48 Magnets

[@OnceinaSixSide]

May I ask why exactly it hurt? I know when I watch Jerry Rig Everything videos I HATE the sound, but I've heard from others they just hate seeing equipment scratched. Keen to hear your experience. Thanks!

[@sinithwar8991]

@OnceinaSixSide I loathe seeing such a pristine, well thought out design be butched for a well thought out handle. I would prefer to use magnets to avoid damaging it. Something just makes me crumple a little when I see the damage ✌️

[@GeekDetour]

Sorry, I cannot continue watching you scratching all surfaces like that... I stopped at 7:16 Check your analytics audience retention to see if I am the only crazy person that cannot stand that.

[@OnceinaSixSide]

Sorry about that! I haven't got any retention data yet but I appreciate the feedback. I'll replace scratchy sounds with fun sfx next time and we'll see if that improves things. If you just skip ahead to 8:06 there is not a single other scratch placed for the remainder of the video.

[@GeekDetour]

@@OnceinaSixSide Ha ha ha, well, your response surprised me well. I'll watch the rest. It was not the sound, it was seeing a perfectly new product being "abused" just to prove "yeah, metal" 🤣 I always think of people that would love to have it, and it arrives extremely expensive at their countries (Brazil, where I am from, is one example)... and they see a guy treating their object of desire so poorly 🤦‍♂ Maybe it's just me, too emotional 🥺

[@OnceinaSixSide]

@@GeekDetour Ahh I see now! Here I was thinking it was the sound because everytime I see a Jerryrig Everything video and he does his scratch tests I can't stand the scraping noises. That's an interesting perspective. For me I feel like I gotta really get to know what these machines are made of 😂 Welcome back btw, hope you enjoy the remainder of the video 🍻

[@GeekDetour]

@@OnceinaSixSide Man, we should be friends. I just watched your "This is not working" video - I wrote a lot there in a comment... And yeah. Making ends meet when you have an artist's soul is... Geeeeee... it's hard. BTW, I sent you a direct message on your Patreon.

[@ovarb12]

Isn't there 2 flavors of this printer? A $300 and a $400 version.

[@hmisay4976]

An Australian playing a guitar? Mad Max sponsorship confirmed.

[@MrPetersVideo]

Elegoo used the build plate "end" (not the screen) for the auto leveling because the Ultra has the tilting vat, and thus too hard to sense pressure down there also. It could be done but would need far more complex design in total. And they are not going to make two very different versions (plain 4 and Ultra) eg the plain 4 having a screen sensor and 'normal' build plate. So the plain 4 just gets 'half' the solution.... (the monsterous build plate!).

[@Incarsonator]

What happens when your auto levelling M5s Pro can't level and the manual back up doesn't work? I found out this week. Basically you send an email to anycubic's long suffering customer support and they get you to video yourself following the manual leveling instructions. Once you do that they send out a new build plate. I've asked them to throw in some FEP but time will tell. Hopefully that will fix the issue, if not then I guess we will see.

[@danastratton61]

Thanks for the in depth review. I like some of your add ons. I'll look at downloading some! Can I make a suggestion? Please use a nice metal Spatula to remove your prints. You are going to ruin that beautiful textured Elegoo build plate for no obvious reason. Just my 2 cents.... Can't wait for the Ultra review.

[@UriskOfTheFae]

I HAD NO CLUE the regular Saturn 4 doesn't have the exposure calibration tool! Holy heck! Why the hell would they only put that in the Ultra? I've been looking at these printers and I completely missed that. Not having the exposure calibration tool is a deal breaker, and I still have no interest in spending the extra money for the Ultra

[@KolMan2000]

The issue is they released the Ultra as an “upgrade” to the Saturn 4. Though, in reality, the Saturn 4 Ultra is the actual only machine of the two you should get since the base one doesn’t even have proper tuning. Exposure calibration has zero reason to be a feature exclusive to an upgraded version of the printer. That is the absolute DUMBEST thing I’ve heard of a company doing on a printer. It’s like BMW charging you to use the features in your car

[@MikeSmith-gm5xo]

Excellent review, I have the saturn 4 already and I like it, It feels almost weird not to have to do anything and just let the self leveling do it's thing. I had an issue with it not booting the second time I tried to use it but elegoo gave me an updated firmware and it's working fine now. Must be because I had a very early firmware. I second you in saying it REALLY needs a calibration tool, please elegoo, add this feature.

[@forrestegan]

This printer did not impress me over the Saturn 3 Ultra…they added a lot of ‘stuff’ but I don’t really feel that it’s any better and would just get the 3 Ultra over the 4 or 4 Ultra. I hope they don’t add all this ‘stuff’ to the upcoming Mars 5…as I love my Mars 4 Ultra and am curious what’s next in that line.

[@AlliDelta]

My m5s has the adjustable build plate, the bolts are hidden underneath stickers in case you need to manually level at some point.

[@danytalloen]

At 35-ish, I think all those screws are mounted with a torque spanner at a specific torque, just guessing though. I'm only a noob at resin printing having only a Halot One.

[@3dpathfinder]

Id bet you have the funds to grabs a Saturn 4 Ultra yourself.. They are very affordable for what you get

[@CerealEater]

Hey, i have an old first gen epax x1, i been out of 3d printing for a while and been looking to get back in, what printer would you recommend as the go to for printing minis now?

[@OnceinaSixSide]

Hmm lots of good options. Latest gen stuff is cool, great deals to be had on previous gen also. I talk about this at length at the end of this video and include links in the description

[@thedafool]

You've both made me happy and mad at the same time You've been so dismissive of heaters over your previous videos, this is first time you've taken them seriously and I'm super happy to finally have your take on them I'd love to know if you've got an Anycubic M7 Pro review on the way as it's got such a unique heating system but I'm worried about potential issues

[@HelterSkelter199]

how shit must the tilt bed feature be that they have to gatekeep a software feature to keep the value up on the premium model...

[@guinhill]

First time I've seen a Tilt Screen on a Printer, was on de Prusa SL1 , they have proven it's a great reliability increase. I'm curious how the tilt screen on the Ultra handles hard to print with resins. Or even printing a big flat surface that would be stupid on a regular printer.

[@matts8023]

Haven't watched 30 seconds in before I knew. They purposely pulled those software features off. I didn't even open mine. Sold it out of irritation.

[@matthewtapia8501]

I would NEVER go back to anycubic there customer service is crap. I had one of there printer from filament and rise and both the ones I had never works. The worst experience I ever had was

[@HyJyncks]

There's no good reason not to include the calibration feature. No, elegoo should not give him an ultra, they should just do better for their customers. It's not hard to have 4-8 sections of a screen turn on/off the printer already does that. That's kinda the reason it exists at all.

[@7kortos7]

4:25 i'm not sure why the engineer thought noone likes handles lmfao. like some sort of pressure plate, overhang, texturized grip... anything at all would have been so easy.