I show you how to terminate, Van damme 268-027-060, classic quad microphone, Ultra Pure SPOFC Conductors, for making analogue interconnects. Ebay item no:- 322931285723.
Пікірлер: 41
@CagedPaps5 жыл бұрын
I just bought a cable for some headphones (Sennheiser HD600) and the guy who made it happened to use Van Damme Cable, so was curious. Good to know you rate the cable, it wasn't expensive so it's nice to hear.
@tweakerman5 жыл бұрын
Hello, I wired my son's hd595 with this van damme star quad cable, this is one of the best cables van damme make, it takes around 500 hours to break-in, to reach optimum performance, thanks for commenting & watching.
@imas14155 жыл бұрын
Hello mate, love your videos, could you please tell me if this sort of cable could be used to make a balanced headphone cable for the hd800 and will you ever be doing a tutorial video for a balanced cable, thanks.
@tweakerman5 жыл бұрын
Hello, this cable is perfect for balanced cables & yes you can use it as a headphone cable, I've used this cable on my son's HD595's, you need to run this cable in for around 500 hours, to get it to sound the best, I hope this is help & thanks for watching.
@imas14155 жыл бұрын
Thanks very much
@drewe59615 жыл бұрын
Great video! Would that specific cable be good for audiophile RCA interconnects for car amplifiers? Or is there a better van damme cable better suited?
@tweakerman5 жыл бұрын
@@drewe5961 Hello, it should be good for car audio cable, thanks for watching.
@synaesthesia2010 Жыл бұрын
this is a bit late as i've just found this video, but the definition of an 'unbalanced' cable means it only has a single conducter for the center pin on the plug. 2 or more conductors, like this cable, is balanced
@WyreForestBiker3 жыл бұрын
Just found your channel ... love it ! . i need a digital coax for between cd player and DAC , do you have recommended cable for that purpose .. I believe it should be a different spec than ordinary interconnects ... thanks ..( a vid would be great ! )
@tweakerman3 жыл бұрын
Hello, here's a link to a excellent off the roll digital cable 75 ohms, its none stranded one you need, thanks for the kind word's & thanks for watching www.vdctrading.com/shop/van-damme-cable/analogue-video/Transmission-Grade-11mm-Triax-Camera-Cable/van-damme-transmission-grade-11mm-triax/
@tweakerman3 жыл бұрын
Alternatively, you can watch my video on making one kzbin.info/www/bejne/eH-TZ5d5p6umqtE
@misterwirez7731 Жыл бұрын
I always give myself some room to work and strip out inch or so.
@MrBeblis3 жыл бұрын
Can you please direct me to where I can buy some silver filled copper conductor wire for speaker wire construction. I am having a difficult time finding the exact one you were using. I appreciate it
@tweakerman3 жыл бұрын
Hello, here's a link, & thanks for watching www.wires.co.uk/acatalog/silver_filled_cu.html
@michaeldauskursas39583 жыл бұрын
Great video could you please tell me if you use this as a speaker cable could you cut the jacket off it and put ptfe tape over with braid also would u ground it to your amp thank you Michael
@tweakerman3 жыл бұрын
Hello Michael, if you want to use it for Speaker cable, you will need 6 lengths to build up the size, so what I would do, is cut the jacket off of 3 lengths, twist the 3 together, then wrap ptfe tape around, then join the 3 braids together, & then gound them, so 3 for negative and positive, if you get what I mean, thanks for commenting and watching👍
@michaeldauskursas39583 жыл бұрын
@@tweakerman thanks so much michael enjoy all your videos could u suggest a good lead for a dac michael
@tweakerman3 жыл бұрын
@@michaeldauskursas3958 this cable is excellent, look on ebay for it, www.van-damme.com/vandamme_product/van-damme-transmission-grade-11mm-triaxial-camera-cable/
@michaeldauskursas39583 жыл бұрын
@@tweakerman thanks for your time Michael
@Broadmaynewood5 жыл бұрын
Keep up the good work.Really enjoy your very informative videos.Ive always thought that cables were a rip off from these large companies.Ive just started using Belden electric cable for speaker wire and it seems to be working really well.How long do these cables take to burn in ? Kind regards Terry.
@tweakerman5 жыл бұрын
Hello Terry, speaker cable, usually takes around 300-500 hours of listening before they reach optimum performance, I hope this is helpful & thanks for watching.
@Broadmaynewood5 жыл бұрын
Thanks for getting back and thanks for sharing your knowledge. Cheers Terry
@paulfretz67773 жыл бұрын
Will this method of termination work well with car audio interconnect cables?
@tweakerman3 жыл бұрын
Yes, it will work really well, thanks for watching
@jackvanderwerf12945 жыл бұрын
FYI, I'm in the States, can't find it on ebay, and can't find this cable on the Van Damme website. Maybe a link?, thanks, j
@tweakerman5 жыл бұрын
Try this link www.vdctrading.com/search/Star%20quad%20microphone%20cable/
@sophalkin55284 жыл бұрын
What kind of cables is that?
@tweakerman4 жыл бұрын
Van Damme star quad microphone cable, thanks for watching.
@MrBenchfitter4 жыл бұрын
Hi there, interesting video , could you tell me the item number for the phono plugs please, thanks
@tweakerman4 жыл бұрын
EBay item number 151270900718, thanks for watching.
@MrBenchfitter4 жыл бұрын
@@tweakerman thanks for that, have just bought the plugs and cable, i`ll let you know how i go on. ta
@MrBenchfitter4 жыл бұрын
Hi tweakerman, made 2 sets today, quite bassy though, I`ve put it on cd to preamp, i`ll see how it goes, thanks again.
@AudioFlat4 жыл бұрын
The spec for that cable says the braid is tin plated - not silver plated as you say.
@tweakerman4 жыл бұрын
Hello, yes your right, I do these video off the cuff, so make some mistakes, nice to see you are so observant, thanks for watching
@paulorosario73784 жыл бұрын
great man tks
@ЄвгенДомашець4 жыл бұрын
not bad - but with good flux - solder will be more better and shine like mirror.
@MrFox19523 жыл бұрын
Can i use this as speaker cable? if so will it affect sound quality
@tweakerman3 жыл бұрын
Hello, its a interconnect cable, its to thin to use as speaker cable, thanks for commenting & watching.
@EmilioGarcia-fr5po4 жыл бұрын
Stop saying basically cmon
@Destructor80314 жыл бұрын
lol getting them cryogenically treated makes 0 difference to the sound. I cant believe some people fall for that bs. While cryogenically treating the increases the electrical conductivity it only does that while it cold, as soon as the cables warm back up to room temperature the benefit is lost so you would need have the cables submerged in LN2 indefinitely. And cables do not need to be broken in ffs.
@AvalancheUKOfficial Жыл бұрын
Think he said it was for preservation of the cable. Just need to get two cables - 1 which has been used for 50 hours and a 2nd which is unused and A/B compare the two.