RC Jet Ranger

[@melvinw.quinene841]

Awesome heli and a very smooth.flight ! 👍🏻

[@davidcracknell2008]

Great looking jet ranger Stefan. Well flown.

[@brendanshield]

Sounds and looks real nice! Well done

[@cofgo2]

Beautiful model, nice bright lighting, the only thing i don't see right is the angle of the tail, not scale as it looks that tail is bent downward. other than that nice flying, nice colors, very balanced, it would be perfect if it wasn't for the tail that get's me crosseyed. Good work.

[@stabes70]

Lovely 206.. Nice and smooth

[@eddix27]

Beautiful helicopter and video!

[@starshipgus8578]

That's one beautiful machine and flies so smooth.I especially like the remote arming plug.Too bad there is no room for a cockpit

[@karen040257]

It would be great to know where that arming plug came from!!! I want one (and more!)

[@p.r.5628]

Oh, there is plenty of room for a cockpit.

[@pyaesoneaung2093]

Perfect landing. Nice

[@yyuzgen]

Is it a custom made high landing skids or did you just buy it from somewhere ? Beautiful landing skids makes the look of the heli real.

[@bladerunner469]

WOW Simply BEAUTIFUL!!!!

[@scalercheli]

Very nice, i also have same one. But it's smaller than yours.

[@allgood6760]

Awesome!

[@juanw6529]

❤❤❤

[@onedisser]

It's a Fun-Key 50 Size modell. There also is a fact sheet of dimension.

[@christophermarvin85]

Just like the I flu in the 80/90.

[@robertgorgol253]

Very nice one! How did you manage to drill the hole for led cables in the rear vertical fin? I have .50 size exact fuselage and I'm wondering how to drill and put cables inside the fin.

[@onedisser]

Hello Robert, the vertical fin is nearly hollow. I took a 3W emitter-led, soldered the cables and drilled left and right on top of the fin. A bit tricky, but just do it! Here is the full story of building it and you can see some pictures: www.vstabi.info/forum/read.php?10,101841 Stefan

[@robertgorgol253]

@@onedisser Hello Stefan, thank you for advice and good news about a hollow type of vertical fin! I'll surely study your build that you linked. If you don't mind, could we contact on Messenger? I'm on begining of my build so having your contact would be blessing in case I get to the wall at some point. You could find me on Messenger under the same name and last name as on YT. I could not find you, though. Again, thanks for your reply!

[@onedisser]

Hi Robert, Stefans email is : [e-mail]

[@robertgorgol253]

@@onedisser thank you :-)

[@onedisser]

Thanks, it’s a custom made landing skid.

[@majorsmackdown]

Is the tail case you used still available ?

[@onedisser]

This tail case isn’t available anymore. It was produced by Nennos helishop. May be the one from minicopter could work, but it depends on the diameter.

[@onedisser]

Thank you.

[@onedisser]

onedisser Hello skinny3715, these tailrotor-blades are manufactured by kbdd in different colours. I produced the black-white scheme by using black blades and white adhesive foil for a plotter. For example: www.rcheli-store.de/Rotorblaetter-Propeller/Heckrotorblaetter/KBDD-Heckrotorblaetter-96-mm-schwarz-z-B-Logo-600-T-Rex-600.htm?shop=rcheli&SessionId=&a=article&ProdNr=MTT-KB4075&t=11&c=57&p=57

[@onedisser]

onedisser Hello Skinny3715, take a look at this - there are a lot of informations building this scaler-heli: www.vstabi.info/forum/read.php?10,101841On top of the tail fin iIt’s an Emcotec 3Watt LED-Beacon. Take a scalpel, cut the red cap from the vertical fin and glue this cap on top of the 3Watt-Beacon. Glue the whole Beacon (cap plus Beacon) on top of the fin. The plus and minus-pins are bent downwards and the small electric cables are soldered on.www.vstabi.info/forum/file.ph p?10,file=15225The vertical fin is hollow, so you can drill and mill two little holes to put the plus and minus-cable from the LED downward towards the tail-fuselage. www.vstabi.info/forum/file.php?10,file=15217

[@skinny4070]

where did you get the blades? is that 600 size?

[@skinny4070]

how did you get the light on the vertical part of the tail without showing wires? i'm building one with a body by funky and a thunder tiger air frame. awesome job on the video and helicopter

[@codica33]

Goooooood!

[@TopGun5]

How much does that cost?

[@alfredotreglia1751]

Ciao, volevo sapere quanto costa questo modello elettrico e dove posso trovarlo...complimenti per il canale.,grazie

[@janosch160-ronny7]

nice

[@jeffmullinix7916]

Being a Mikado mechanics why even buy a Funkey body . A lot of money and it is not even scale . For a little bit more money i would have bought a Vario heli or a old Kavan so the tail rotor would be on the correct side . Then there is the stupid switch on the side . To me this is just a fun scale heli at a high cost . I do like the Kavan Jet Ranger fuse better and it is a bit more scale than this . I am converting my Kavan Jet Ranger into all electric modifying what I have to work with . I would love to find a flat bed mechanics for it where the servos , motor is all at the top of the heli . That way I can have full interior .

[@YIR78]

what size heli bell 206

[@towcobraah104]

head speed high for a scale heli. tails on wrong side for jet ranger.

[@prtka66]

Does it bother anyone?

[@samrockseagle]

exactly how I fly... In simulator of course.

[@jackielee5815]

The man did good fly his helicopter the model helicopter.he should take lesson how fly real helicopter.

[@robertolivo9487]

Hi that's a Nice Helicopter and i would like to Know how can I find one of this please let me Know when possible thanks.

[@onedisser]

Hello Roberto, a description is given at the end of the video. It’s a 50 (600) size Fun-Key fuselage like this fun-key.com.hk/productshow.asp?showid=141 Here is the full story of building it: www.vstabi.info/forum/read.php?10,101841

[@robertolivo9487]

Hi Onedisser thank you very much i appreciated thanks.