ONSTAT OFF-ROAD ENGINE DYNO REVIEW & WHAT I CHANGED

[@davidgolf7562]

Great and interesting stuff, I do motorsport engines which get engine dynod, then rolling road. Always loved RC, great hobby and very educational regarding engines and chassis/suspension tuning

[@kings-racing]

Thank you. Yes, motorsports and scaled motorsports are very much alike Thanks for watching.

[@RCWright]

Wow Kings what a top job you have done on that!! Super nice. Glad you have it up and running. Looking forward to seeing the comparisons 😊

[@kings-racing]

Thank you. Appreciate the comment.

[@MrDeathlus]

King we are all glade your genius is used for good lol. Awesome vid to come back too thanks

[@kings-racing]

Thanks Mrwalt appreciate it👊

[@ThompsonRc]

Awesome video Kings I hope they compensate you for your engine you definitely made the dyno better

[@kings-racing]

Thanks Thompson 👊 it would only be normal to take responsibility for a mistake.

[@TastyBRC]

Awsome, I am very impressed, very clean job, the oneway bearing system, the brakes, the engine plate, everything is looking perfect. A shame they didnt send you the video on how to use the dyno.. its very sad for the r5r wich is a great engine. I cant wait to see the umpcoming videos this is going to be very interesting.

[@kings-racing]

Thank you my friend. I wish they did send me the video. A question would arise immediately. And i wouldn't have destroyed my favorite Reds engine. It's very sad when a piston sleeve set is nowhere to be found. But i'm glad i got it working the way i want it to work. It's going to be very interesting and we are gonna learn a lot.

[@a2rc]

Kings, that is a great improvement ‼️ I’m with you, you need to be able to trust the dyno and all of the components of it. It looks like you have a solid system now 💯 Awesome work I’m really looking forward to see your future test 🩷

[@kings-racing]

It's much better with these mods. With extra costs of only 10% of the dyno price. The added weight and friction (maybe even oneway bearing slipping) will have effect on the numbers. But for comparing it's perfectly fine. The computer and sensors are very sensitive and pick up the slightest difference. Very good. Thanks for the comment buddy 👊

[@tonysands2837]

Awesome 🙌 job bro appreciate you sharing good damn that’s high tech 💯🤜💥👍🇦🇺🔥

[@kings-racing]

Thanks bro. I finally got it working the way i want it to work. Appreciate the comment 👊

[@NitroFreak]

awsome vid i hope the company compensates u for the engine there dyno destroyed awsome to see how u rigged it up to work u da man kings and yes i agree should never have to pull plate to detach the engine thats definatly not how a dyno works love the upgrades u did to this nice job brother

[@kings-racing]

Thanks brother. I hope so too. If you admit and apologize for a mistake, not providing essential information, i would take my responsibility. We will see. I'm glad i got it working the way i want it to work. Appreciate the comment 👊

[@NicholsonNitroWorks]

Hello Kings Racing! Im glad you beautifly modified the Dyno Ive been anxious to see your new testing videos! Please test if an air filter robs horsepower. Also the increase with ceramic bearings and high nitro content. Thank you!

[@kings-racing]

Hello NicholsonNitroWorks.There will be a lot of testing in the near future. Stay tuned buddy👊

[@Serialcrasher]

Cool video Monsieur Kings 👍

[@kings-racing]

Merci Monsieur Serial 👊

[@TexasHill]

Excellent work my friend !!! Very Impressive !!! 💯👍

[@kings-racing]

Thanks buddy👊

[@xskyaflake]

Best nitro guy on KZbin

[@kings-racing]

Thank you very much for your kind words

[@haywirerc]

This is so cool! Good work on the dyno!

[@kings-racing]

Thanks bro.👊 I can finally do some testing.

[@ofnaguycarlwatts8602]

King's My Brother. Brilliant design.just send them a bill for brilliant design and sell them your design along with a contract for sponsorship. 100k a year sponsorship should be suffice 😂😂 ok enough of the jokes Great job and design you came up with My Friend.very unique and professionally done Sir.now come up with a brake for clutch bell and stop using your finger. 1sharp burr and its gonna be a metal splinter and i can tell you it hurts like a mo fo 😂😂 can't wait for so action on track and Dyno videos . patiently waiting 😂 Top notch as always Brother 👊👊 🔥🔥🔥🔥

[@kings-racing]

What up Carl. Thanks. Yeah, i will need to patent it, but that's too much hassle for only 100K a year😆 I only need to stop the clutchbell when i Install the engine plate. Think my finger will manage.😅 I don't touch the clutchbell after the pull. This is gonna result in very interesting information. Appreciate the comment brother👊

[@ofnaguycarlwatts8602]

@@kings-racing you know me brother 👊 I like bringing humor I knew you would get a chuckle at my Crazy. I was paying close attention to detail.i seen what you were doing. 😂 Only thing I was serious about was Great work and can't wait for videos to come 👊👊 Great job Man.

[@rogeriovalentim9446]

Estou desejoso para ver esses resultados

[@kings-racing]

Stay tuned. Planning to do a lot of testing..

[@hotrod67rc6]

Awesome Vid sucks about engine that company should take note on your mods to improvements on their dyno👊💥💯

[@kings-racing]

Thanks brother. Yeah, if there is no piston sleeve sets for this engine it's very sad. These mods cost only 10% of the dyno price. And it's 100 times better imo. Appreciate the comment 👊

[@treasurekapo7306]

Isn't it a direct connection? What is the result of measuring the increase after passing through the reduction gear?

[@kings-racing]

It's connected through a 13t clutchbell and 52 spur. It measures/calculates rpm, hp and torque on the flywheel

[@treasurekapo7306]

@@kings-racing This looks like a test wheel result, not an engine test?

[@kings-racing]

​@@treasurekapo7306the flywheel is powered by the engine

[@jukkaovaskainen]

So sad to hear that you burn the engine and it was Onstat's fault. Dyno looks great though. Is that Reds piston/sleeve part number ES214987 ?? I think that I know one set (not from my engine 😁), if the stock situation is correct.

[@kings-racing]

Thanks buddy. Yeah, it really sucks. The partnumber is ES214986. It's from a Reds r5r racer 5.0 (ENBU0025). Got this partnumber from Marco Rossi at Reds. Think there are several numbers, ES214985, ES214986 and apparently ES214987. Didn't know about the 87 and not know if the 85 or 87 will fit or what the difference is. I can't find neither of those. I could take the risk and see if those other ones fit. Let me know were the 87 is. Thanks

[@jukkaovaskainen]

YT not allow to put direct link

[@jukkaovaskainen]

You could send me email if something to ask etc

[@kings-racing]

​@@jukkaovaskainen Thank you. I'm gonna check. Maybe ask Marco if that set will work. I will let you know. Thanks

[@jukkaovaskainen]

I could send a message for them that could they send parts to you.

[@Dirty263]

Hey buddy if I paid u could u make me them parts u have ? I have the same dyno here at the house . Do u have a email i can contact u at . I pay for it i really dig the setup .

[@kings-racing]

What up bud. Did you get the instruction video with the dyno? Hope you didn't destroy an engine. Unfortunately i can't do that. I'm a busy man and like i said, i'm no metal worker and this took me a lot of time. It also would get very expensive with all the material, parts, labour and overseas shipping. Maybe you have a local metal worker or machine shop that could make this. Or maybe ask the guys from OnStat. I'm sure either of them can make this better and cheaper than me. Keep me posted.

[@Dirty263]

@@kings-racing lol ok 👍 thanks 🙏 bro

[@kings-racing]

​@@Dirty263 so did you get the instruction video??

[@Dirty263]

@@kings-racing yes i did

[@Dirty263]

@@kings-racing i just didnt want to blow nothing lol. Do u have the dimensions thar u used that way i can have it made . And parts u used boss