Onyx Punch / Flange Tool Review

  Рет қаралды 18,849

groutaone

groutaone

Күн бұрын

Пікірлер: 36
@prancstaman
@prancstaman 6 жыл бұрын
Handy little tools. I made one of those flange tools from an old pair of vice grips, fully adjustable but not a wide. Works real good, I'll eventually use it on a project coming up. Happy New Year to you and yours.
@groutaone
@groutaone 6 жыл бұрын
Thanks man
@weloveups831
@weloveups831 2 жыл бұрын
I just bought this exact model you have. It appears on your video. That the tool fully closes on itself as one would imagine it should. I have 110 psi even hook directly to compressor , no Hose. I can't get it to barely close maybe 1/2 actuation. Question is there an adjustment I am missing? Or just defective tool
@saebbi
@saebbi 6 жыл бұрын
I have a similar tool from Eastwood, it worked fine for about a week of use doing bodyword, only thin sheetmetal 0.8 millimeter, it was a great tool but it didn't last, and customer service for international buyers is clearly not a priority. I will look in to buying a new tool like this, of higher quality.
@kmcwhq
@kmcwhq 6 жыл бұрын
What gauge is that metal you have there? How is your vacuum tube solar heater system working ? Would you do an update on it please? Best wishes in the new year.
@groutaone
@groutaone 6 жыл бұрын
Thanks for watching, I'm not sure what gauge, likely 18-20 range, I measured it with a caliper to be a little under 1/32 inch, I think maybe I will do a solar update video.
@kmcwhq
@kmcwhq 6 жыл бұрын
Please do the solar update vid
@zackprysiazniuk2541
@zackprysiazniuk2541 6 жыл бұрын
What ever happened to the long travel suspension build!? Love the vids
@mq1991
@mq1991 6 жыл бұрын
he probably realizes that a lot of us are subscribed for that, he probably sold the project awhile ago, and isnt going to inform us because we will stick around then. If he tells us he sold it a lot of us wouldn't be here....
@groutaone
@groutaone 6 жыл бұрын
mq1991 I still have it, progress has stopped. if you are subbed waiting for more now is a good time to unsub.
@AndyFromm
@AndyFromm 6 жыл бұрын
groutaone why no more?
@groutaone
@groutaone 6 жыл бұрын
I considered what I was actually doing and promoting, I suspect I could have built a large channel by driving it, crashing it, show what's broken, show how to fix it and repeat the process over and over and it just does not fit with my Christian faith, I felt I would be promoting myself and the machine as idols, not cool, I would rather be a nobody than a somebody. That's also why there are no more cr500 videos among other things.
@bobbastion7335
@bobbastion7335 6 жыл бұрын
So, you think people would be worshipping you and a machine you built? And what's a cr 500?
@teiganharris2376
@teiganharris2376 6 жыл бұрын
Great little tool! Any updates on the long travel suspension build? Miss that buggy!
@hobbit321a
@hobbit321a 6 жыл бұрын
thanks for the vid i like your punch i have seen others but yours seams to work more consistency was going to ask for the return of intermissions then you went one step beyond thanks for putting the info out there its great to see god in your work thanks
@Mercmad
@Mercmad 4 жыл бұрын
These work great, but .. they will stop working or will refuse to punch holes. How to fix it? Simple,these are actually air over hydraulic and the hydraulic parts are pretty lousy,so simply undo the screw in the side of the head and add a few more drops of hydraulic oil, and it will work again. I also store mine in a redundant air fitting screwed to a bracket so it sits vertically and the oil doesn't leak out when it's not being used. Plus, oil it every time you use it with a few squirts in the air line fitting.
@Finchnz
@Finchnz 6 жыл бұрын
hi mate, bit of an odd question and couldn't work out where to ask it, but why have you removed so many of your old video's? are they on different channels? I wanted to show my kid your CR500 build videos and the ones of your traxxis car as they were awesome.
@kolbyflathers9892
@kolbyflathers9892 6 жыл бұрын
What happens to the long travel suspension go kart and would you sell it
@stephenyoshida9966
@stephenyoshida9966 4 жыл бұрын
Are none of the comments going to address the endtimes prophecy at the end? Was that not a twist for anyone else? Not making a value judgement here... just noticing no one in 9,000 has had much to say!
@keysautorepair6038
@keysautorepair6038 6 жыл бұрын
Hey were is your video of you cutting apart a bbc head
@ACA332
@ACA332 6 жыл бұрын
Have you been following the Peterson biblical lecture series on youtube?
@groutaone
@groutaone 6 жыл бұрын
No not familiar with that one.
@ACA332
@ACA332 6 жыл бұрын
He's a clinical psychologist and a professor at University of Toronto. Since May he's been selling out a lecture theater exploring the psychological significance of the stories of the bible. I've never read the bible, always considered myself agnostic. But those stories, they've helped me understand a lot about the world today, and what it means to be human. Search Jordan Peterson biblical series. You might find it interesting.
@groutaone
@groutaone 6 жыл бұрын
I watched only a few minutes of I'm sure many hours of video that is available, he was of the view in those few minutes that the creation account in Genesis should not be taken literally, I do however. You know his thoughts much more than I do so I will ask your opinion. If someone were to ask him, is Jesus the Son of God who came in the flesh? How do you suspect he would answer?
@ACA332
@ACA332 6 жыл бұрын
I don't know how he would answer. I think it's a great question to ask. And I think you ask it with very specific intent. I don't know to what degree his views align with your views. The lectures are grounded in the science of psychology, as that's his primary area of study. But there is an awareness of the limitations of that. If you get the time to watch a couple, I'd like to hear your thoughts from your perspective.
@EivinSukoi
@EivinSukoi 5 жыл бұрын
No i havent yet , I've been busy jerking off .
@805ROADKING
@805ROADKING 6 жыл бұрын
Nice tool to add to the Arsenal!! Everyone is a Bodyman eh!!☺
@shoe2241
@shoe2241 5 жыл бұрын
great tool, liked the ending alot better!!!
@omyajt
@omyajt 6 жыл бұрын
Thumbs up Groutaone.
@groutaone
@groutaone 6 жыл бұрын
Thanks man
@Oldsmob455
@Oldsmob455 6 жыл бұрын
More Nasa picture reviews please. :)
@groutaone
@groutaone 6 жыл бұрын
I had a look at your channel and you are very capable with auto repairs I see, what were your thoughts on those nasa.gov moonlander pictures?
@Oldsmob455
@Oldsmob455 6 жыл бұрын
Total hoax! I really enjoyed the bit by bit break down of those pics from the viewpoint of a fabricator. Keep up the good work.
@groutaone
@groutaone 6 жыл бұрын
I used to think the moon landing was real. Prior to those pics did you believe it to be true as well?
@mikebrace252
@mikebrace252 6 жыл бұрын
This used to be a good channel then you brought your religious horseshit for some reason. Unsubscribed
@eddylanzboy
@eddylanzboy 6 жыл бұрын
God is great.
Metal flanger comparisons
9:42
Outlaw Edge
Рет қаралды 13 М.
JPP-1 - Joggler & Punch Plier (S200)
4:17
Hare & Forbes Machineryhouse
Рет қаралды 283 М.
HELP!!!
00:46
Natan por Aí
Рет қаралды 15 МЛН
605ST FLANGE AND PUNCH COMBO AIR TOOL REVIEW
4:19
Spiral Design Works
Рет қаралды 1,5 М.
Test It Tuesday - Hole Punch And Flange Tool And Why You Need One
13:00
Butt Welding Automotive Patch Panels - Start to Finish
9:39
Lakeside Autobody
Рет қаралды 327 М.
Chief (Harbor Freight) Air Punch and Flange Tool.
5:44
EJH British cars
Рет қаралды 6 М.
HARBOR FREIGHTS BEST KEPT SECRET!!! AN ITEM SO GOOD EVEN INDUSTRIAL COMPANIES USE IT
8:45
Official Welding & Farming Archive
Рет қаралды 865 М.
Tipping A Flange On A Curve - How To
10:12
HotRodHippie
Рет қаралды 76 М.
Vevor CH-70 Hole Punch Tool Review and Demo
8:11
Mechanic Secrets
Рет қаралды 21 М.
🔧Tool Tech Tuesday #37 | Sheetmetal Punch Flange Tool
5:03
MoonBuilt Garage
Рет қаралды 4,3 М.
Which center punch is best?
7:25
Robert Cowan
Рет қаралды 104 М.