just came across your channel, I have the same car, have watched all the videos, you doing great thanks for all the valuable explanations. you make it feel less intimidating.
@solveitautomotive94857 ай бұрын
Thanks much appreciated
@nigeldaniels678017 күн бұрын
Thank you for this video. Did you ever experience fuel smell in the cabin? If so do you think its the Fuel Carbon filter under the driver side fender? This is really bothering me at the monument. Your help with this would be great.
@DimpieDeBruyn8 ай бұрын
I did mine about a year ago ... the first time is not easy. I also messed up something with the float when putting the new one in, as the fuel gauge is completely out of sync with the actual level in the tank ... I will have to drop the tank again sometime to fix that,but im really not in the mood. These bakkies should have come with a trap door at that location by default ... I don't see myself cutting mine, as the kids usually sit at that location. Nice idea tho.
@solveitautomotive94858 ай бұрын
Hi. Yes it's a crappy job, but you did it. The float is an issue . You can put the old one back or adjust the pointer on the fuel gauge. Keep the ignition on when doing it. I will cover it in a video.
@DimpieDeBruyn8 ай бұрын
@@solveitautomotive9485 Mine is weird... Shows full even tho the tank is about ½ ... then its a quick drop to about a ¼ tank on the gauge and by then the tank is actually close to empty. I fill up every 500km just to be safe. 😄
@DimpieDeBruyn8 ай бұрын
@@solveitautomotive9485 Yes please do a video 👍
@KasNarainen29 күн бұрын
What brand fuel pump did you fit
@paperdreamsservices82388 ай бұрын
Thank you, very informative and well presented
@JanPietersen-ms9wb6 ай бұрын
Would the smell stop if I replace my idling and throttle sensors
@solveitautomotive94856 ай бұрын
It would be better to do a close inspection of the entire fuel system and see if there are any leaks especially if you can smell the petrol from inside the cabin or while you are driving. Replacing the sensors are likely not going to solve your problem.
@SirKK-zy9qz7 ай бұрын
With what did you seal the leakage on the plastic top cover?
@solveitautomotive94857 ай бұрын
Do not do it it won't last.
@Patrick-jo9eb7 ай бұрын
I have a Corsa utility,petrol pump pack up,replace pump with new pump,now I drive then there is a jerk then it cuts out,if I start again bakkie drive fine then it jerks again,don’t know what the problem is,any help please thanks👊🏽
@solveitautomotive94857 ай бұрын
You should recheck your installation. Loose pipe or leak. Make sure you have the right pump in there . Also check plugs
@Patrick-jo9eb7 ай бұрын
@@solveitautomotive9485 Thank you sir will do that today,did change plugs already 👍🏽
@leratolovas68366 ай бұрын
Thanks for info please use the old floater to avoid wrong reading which is what happened to me now
@solveitautomotive94856 ай бұрын
Hi . 100 % correct . The episode will be released in two weeks. The Bosch pump and housing does not have this problem as the float and arm has the same position as the original one .
@solveitautomotive94856 ай бұрын
@leratolova6836
@SphiweKhanyile-et5vl7 ай бұрын
If is not a pump what is it?
@solveitautomotive94857 ай бұрын
It can be many things , it's difficult to diagnose, it's best to take it to a mechanic.