Opel GT headlight install Part 3
Рет қаралды 11,530
This is the assembly of the passenger side
PART 4 LINK
kzbin.info/www/bejne/f32zm6ZofLmgiac
www.newvintageauto.com
@christopherlynn1845 5 жыл бұрын
Well putting these back in the car that is already painted is hard. The micro switches must be wired first. I had to remove the bracket on the back of the light assembly and remove the front post holder just to get in in the hole. Getting the bracket bolted back on the rotation headlight mechanism assembly is very difficult in addition. I taped up the housing and the body and it's almost impossible not to chip any paint. Be patient. It's easy to want to cram these back in :)
@Opelspyder1 5 жыл бұрын
If you are getting that close to chipping paint, your bodywork to the headlights may be off. I tape them too, but many times, its not even an issue. I've even installed the wrong side onto the opposite side and didn't come close to chipping and it worked.
@5chrislynn 5 жыл бұрын
How are you able to wire the micro terminals with the lamp installed? Is there a technique.
@Opelspyder1 5 жыл бұрын
You cannot wire the microswitches with the headlights installed, everything comes out, the mechanism as well, because the microswitches are behind them
Jas Аlash
Рет қаралды 343 М.