Opsmen Earmor M32 Mod4 Headset Review: Is It Worth Your Money?

[@TacticalMagfed]

These are actually the M32 Mod 4 version!

[@gds10-83]

How did you know that it was mod4 m32h instead of mod3? I have the exact same box you have with reference mod 3 while I ordered mod4 and from what I see, you thought you had mod 3.

[@TacticalMagfed]

@@gds10-83 the mic arm is different which made me think it wasn't the most 3. This one is solid with a hinged joint and adjustment. The mod 3 is flexible without the hinge. But it was one of the viewer comments that confirmed it as they have the mod4 too. Hope that helps 😎👍

[@bobbobo4748]

Nope Earmor actually still calls this the mod3 on their website, no offical mod4 available. Basically its mod 3.5

[@TacticalMagfed]

@@bobbobo4748 Thanks for the heads up, odd that they haven't updated the version.

[@nsnl_]

@@bobbobo4748they however got now 3 different models. 1. M32(H) PLUS - BEST ONE ATM 2. M32 (2 Versions) (mod 3/4) 3. M31 (mod 3) - - - - 4. UNAVAILABLE 299€ MILSPEC VERSION

[@TurkishBenAirsoft]

Great video got some coming tomorrow for airsoft.

[@TacticalMagfed]

Awesome, thanks for watching! Glad you liked the video😎👍

[@helikon06]

These are 100% capable for actual shooting. I'm using the new mod4 and they are really good.

[@TacticalMagfed]

Hi there, thanks for commenting 👍 great news for anyone looking for some budget ear protection 😎

[@rc-pm1fe]

Just got mine but trying to figure out how to switch the mic to the other side. I feel like I'm going to break the mount if I try to pop it off the muff. Is that the correct way to switch the mic over?

[@helikon06]

@@rc-pm1fe it should pop straight off. It's open on one side, I just pulled and it popped off.

[@rc-pm1fe]

@@helikon06 well I decided to not go gentle on them and they did pop off without breaking, so thanks for the guidance.

[@helikon06]

@@rc-pm1fe good job 🤙🏼

[@oggy620]

Thank you i have been searching the internet for info on this. You are a life saver.

[@TacticalMagfed]

Awesome, glad it helped you out 😎👍

[@paradisewithmoto4196]

Awesome video, gonna buy the PTS Flux helmet and put these M32 Mod 3's on them! Thank you for the info

[@TacticalMagfed]

Thanks, buddy 👍 That sounds like a great setup! If you're going to have the headset on the helmet double check the mounting system. My setup had ARC rails, and the FLUX may have M-LOC. It should say in the description which type it comes with. Also looks like they have just released\updated to Mod 4 of these headsets so you may get the newer version (same price) direct from Earmore\Opsmen. Hope that helps and thanks for watching 👍😎

[@paradisewithmoto4196]

@@TacticalMagfed Oh wow, thanks for the response I just thought the helmet had ARC rails. You just saved me hahaha. Gonna have to find a way to connect them now.

[@TacticalMagfed]

@@paradisewithmoto4196 no problem buddy 👍 Just checked on the Earmor UK store and they sell an m-lok kit so you should be OK. earmorstore.co.uk/earmor-mtek-m-lok-helmet-rails-adapter

[@cuestatv9900]

@@paradisewithmoto4196 hey mate, did you complete this setup with the FLUX helmet and m32? I am about to get the same helmet and headset combination and some feedback would be great.

[@chrisjeffrey5880]

Really good review! I am currently looking at buying these.

[@TacticalMagfed]

Thanks buddy, glad you liked it 😎 They are a great bit of kit 👍

[@karner9929]

Really nice review, thank you! I would've liked to see them on with goggles though.

[@TacticalMagfed]

Hi there, glad you liked it! I'm working on some future videos that will have more detail regarding my helmet setup and showing how it all fits together 😎👍

[@prochu975]

I got those mounted on my helmet, but even if I pull up the headphones to the top, they are still too low for me, I tried putting something inside my helmet to raise it a bit, but that caused my helmet to not fit well and it would just stick above my head. You think it's that I have a terrible helmet or too small and terrible helmet?

[@alphax4786]

guys can i wire the cables of the headset to a civilian 7.1 surround type and just use it on my computer or phone?

[@TacticalMagfed]

Hi there, you can get a PTT with an audio jack output, so in theory, it could be possible to wire them to connect to an audio jack. I doubt you could get 7.1 audio though. If you are looking for a military-style gaming headset with 7.1 check out the Razer Blackshark v2 x 👍😎

[@alphax4786]

@TacticalMagfed is it mono or stereo audio i never found anything about that tho

[@TacticalMagfed]

Hi there, it's stereo audio 👍

[@AmorSevenn]

How did you mount it to The helmet???

[@TacticalMagfed]

Hi there, I use arc rail adapters opsmen\earmor have there own version. Check out this video at the 12:30 chapter for my setup kzbin.info/www/bejne/iH63oWd6rdx-nMk hope that helps 😎👍

[@james_wheelz]

what radio do you use with these?

[@TacticalMagfed]

Hi there I use a Baofeng UV-5R, check this video out for my radio setup kzbin.info/www/bejne/bGOvg6Rmbc6pjdE hope that helps 😎👍

[@stephanemorosoli180]

Hi there, what's the differences between mod3 and mod4 ? Sorry if it's explained in the video but I'm not fully fluent in English... Thanks

[@zhuoshili7780]

The mic arm is different and is reinforced and I believe the ear pads are factory gel based,

[@TacticalMagfed]

Hi there, externally the mic arm has been replaced and is stronger. Most of the upgrades are internal. I think the speakers and audio quality have been upgraded too. Hope that helps. 👍😎

[@TacticalMagfed]

Hi there, the mic arm is a great improvement. It's so much better than the old bendy style arm 👍😎

[@seaocean4868]

i have earmuffs like this that are big brand and meant for firearms and they have a db rating of 23 so these would be fine for shooting.

[@TacticalMagfed]

Hi there, thanks for the information 👍

[@subxi5744]

I've seen a lot of videos of Ukrainian military using such headset in the trenches. If they do, I'm sure you can use it on the shooting range :)

[@TacticalMagfed]

True, I know that I would prefer to have a set of these Earmor/Opsmen headsets than have nothing at all 👍

[@BobBob-il2ku]

I saw another review where the battery caps popped off easily any problems with that?

[@TacticalMagfed]

The caps twist on and lock in place. I have managed to twist one off with my thumb. It was more me faffing around getting my mask to fit. I wouldn't say it's a problem as it's only happened once. Hasn't changed my opinion of this headset at all, it's great 👍😎

[@Alexmaine1]

How do you change the batteries

[@TacticalMagfed]

There are twist off caps on the back of each ear cover. You twist the caps just over 90 degrees and they come off so you can insert or replace the batteries. Then twist the caps back and you're good to go 😎👍

[@Alexmaine1]

@@TacticalMagfed thank you, what size batteries do these M32’s use is it AA or AAA. Also how do you tell if your headset is on or off, I bought a set last fall but haven’t used it yet in a game so can’t tell of there off or off.

[@TacticalMagfed]

@@Alexmaine1 they take 2xAAA one in each ear piece. You hold the power on for about 3 seconds and you will hear a voice notifying "Power on" to turn them off hold the power button until you hear "power off". If you leave them on they will turn themselves off after 4 hours. You will know if they are on because you will hear ambient noise around you. Hope that helps 😎👍

[@Alexmaine1]

@@TacticalMagfed so I have a midland radio and it sounds like a screeching through the headset, how do I fix this.

[@TacticalMagfed]

@@Alexmaine1 what PTT are you using?

[@emil_hristovv]

Hi can you hear in the same time outside noise and radio convs

[@TacticalMagfed]

Hi there, I haven't noticed the ambient sound cutting out when using Comms. I think you hear both but it makes the Comms slightly louder or clearer. Hope that helps 👍😎

[@bigbobkill6517]

They hover slightly over my ears when I mount them agar cold I do to make I better

[@TacticalMagfed]

Hi there, have you mounted them on a helmet with rail adaptors? If so there are two positions that the adaptors can click into. One position is "out" or away from your ears and this will make them feel very loose against your head. The other position is "in" which makes them much tighter against your head. To make them click to the in position you need to push on the adaptor arms (towards your head). you should hear them click and then they will feel tight on your head. You can pull them out again and when they click it loosens them to make it easier to remove your helmet. Hope that helps 😎👍

[@jacobthombs9714]

For firearms a 22 is the minimum I would go 30 is better

[@TacticalMagfed]

Thanks buddy 👍

[@ozzelot1983]

mod3 is really bad - mod4 is such a better headset!

[@TacticalMagfed]

The mod 4 came out shortly after I got the mod 3. The mod 3 works great for me. Thanks for commenting 👍😎

[@bobbobo4748]

theres no mod4 version, earmor still calls it mod3

[@rigger4695]

You should not be doing reviews. You have absolutely no clue what you are talking about.

[@TacticalMagfed]

Thanks for the feedback 👍😎