Optimize Your Arrma RC Vehicle: A Step-by-Step Guide to Setting Your Endpoints

Рет қаралды 10,176

Күн бұрын

Optimize Your Arrma RC Vehicle: A Step-by-Step Guide to Setting Your Endpoints
In this video, we'll show you how to optimize your Arrma RC vehicle by setting your endpoints correctly. Endpoints are an essential part of your RC vehicle's performance, and getting them right can make a huge difference in how your vehicle handles. Our step-by-step guide will walk you through the process of setting your endpoints, so you can get the most out of your Arrma RC vehicle. Whether you're a beginner or an experienced RC enthusiast, this guide is a must-watch for anyone looking to improve their vehicle's performance. Don't miss out on this essential guide to optimizing your Arrma RC vehicle!
Hey there, my amazing followers! I just wanted to take a moment to thank each and every one of you for helping me hit another milestone on my channel - 600 subscribers! I'm so humbled and blown away that you guys find my Welsh bloke babbling interesting. I mean, I'm not even sure my own mother finds me that fascinating.
But seriously, thank you for being a part of this amazing community. Whether you're an old follower or a new one, I appreciate each and every one of you. You guys are the reason I keep creating content, and I promise to keep bringing you the best upgrades, tutorials, and new truck content that I can. Speaking of which, have I mentioned the new truck? You guys are going to love it.
So here's to all of you - the best followers a Welsh bloke could ask for. Thank you for making this journey so much fun, and here's to many more milestones to come!
#rccaroffroad #hobby #rc #offroad #rccar #bashing #sendit #arrmatough #arrma #arrmabigrock #arrmaoutcast #radiocontrol #radiocontrolledcar #tutorial #wrenching #radiocontrolcars #arrmatyphon3s #christiwithac #welsh #pantsiderc #arrmaupgrades #arrmakrayton

Пікірлер: 58

@boomjeep99 Ай бұрын

I ran across your video on Facebook I think and I had no idea about setting endpoints I'm glad I come across your video and I subscribed

@ChriswithaCrc Ай бұрын

@@boomjeep99 hey buddy , well thanks so much for the kind words and so glad your able to use this to help you ! That was the plan :) Stay awesome Chris 🤙👍🚀🤘🤩👊

@angkorpeck 4 ай бұрын

This was very helpful step by step programming, i just upgraded the servo on my 4s outcast due to the stock servo being absolute garbage.

@ChriswithaCrc 4 ай бұрын

Hey buddy , Yeah i hear what your saying it does seem that the stock servos are a bit crap to say the least . Really glad that this video helped you get the endpoints sorted . Stay awesome Chris :)

@nahnah21 3 ай бұрын

@angkorpeck what servo did you go with? was it a 25T?

@angkorpeck 3 ай бұрын

@nahnah21 The 35kg Pro Amazon special for $35. I'm still using the stock saver, it's 25 tooth on the v2.5. I put the steering rate at 80% when I set the end points, I turn it up to 100% when I run it, I let the servo saver take care of the extra 20% over steer. The turning radius is cut in half.

@paulus842000 22 күн бұрын

I came across your channel whilst looking for an endpoint setting video for my Mojave 4s thanks for the great simple explaination Im now subscribed to your channel

@ChriswithaCrc 22 күн бұрын

Glad I could help! And thanks so much for the sub really means a lot . Stay awesome buddy Chris 🤙👍🚀🤘

@geoffjewkes6887 Ай бұрын

Great video..... bought my senton last week but only been out once and I haven't set it up properly..... I'll sort this later on today ! Thanks !!

@ChriswithaCrc Ай бұрын

Congratulations on the new truck buddy , Your most welcome as well so glad i could help you out . Stay awesome Chris :)

@delmartinez9349 11 ай бұрын

Thank you this helped me set up my new Mojave 4s! My first Arrma Truck

@ChriswithaCrc 11 ай бұрын

Glad I could help buddy , really does help with keeping your servo safe and makes sure the truck handles well . Congratulations on your new 4s Mojave also . Stay awesome Chris :)

@blainerust7479 6 ай бұрын

Hey Sir. Exceptional video on setting up the Spektrum SLT 3. Thanks so much for covering something anyone with this transmitter could use.. Blaine...

@ChriswithaCrc 6 ай бұрын

My pleasure! So happy you found this information helpful and your able to use it to set your truck up 🤙 Stay awesome Chris 🤙🚀👊

@RussRyan7713 Жыл бұрын

That was super useful. I have a Kraton 4s v2. I will try this out as didn't know it existed. Every day is a learning day. Thanks for taking the time to record it.

@ChriswithaCrc Жыл бұрын

Glad it was helpful! This really helps prolong the life of your servo buddy , unfortunately this isn’t set out of the factory , so a lot of the time servos die due to being over extended this takes out the guess work for you . If it died after doing this well it is what it is 😎 If you enjoyed the video consider subscribing, Loads more videos like this on the channel and more to come . Stay awesome Chris 😎🤙🚀🏴󠁧󠁢󠁷󠁬󠁳󠁿🤘🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿🇺🇸

@RussRyan7713 Жыл бұрын

@@ChriswithaCrc Already subscribed 👍. Look forward to more content.

@ChriswithaCrc Жыл бұрын

@@RussRyan7713 thank you buddy Stay Awesome 😎 Chris

@402Racing 4 ай бұрын

Good video, i might give it a try on my Big Rock 6S, i just received it and i noticed the front wheels being very similar to the car you have there, i gave them a bit of adjustment and aligned a bit better, were they supposed to be like that? i know rear tires are usually set with a bit of toe in and some camber but not the fronts, or is that a good thing as well? i just cursed at Arrma´s quality control and gave them a couple of turns on each side.

@ChriswithaCrc 4 ай бұрын

Hey buddy , are we talking about toe out or was the steering off centre ? , yes rear have toe to keep the car tracking straight at speed and help with stability in a straight line , they will be faster straight but won’t feel as stable . Hope this helps , Stay awesome Chris 🤙👊🤘💪

@402Racing 4 ай бұрын

@@ChriswithaCrc fronts had some toe out, after driving it i noticed it still has some to some degree, i'll give it a try and set it back the way it came from the factory. Just to be clear, i didnt mess with the rears, i only adjusted toe in the fronts so they are almost straight looking, this beast still "scares" me lol, the sounds the tires make on the concrete skate park are closer to what a real car sounds like, if that makes sense, have not really driven it at 100%, 50-75% so far, i own a FTX Carnage that goes 45mph, but this thing is bigger and weights like double.

@ChriswithaCrc 4 ай бұрын

I hear you buddy they are a beast , but very addictive is the 6s range ! Yes some toe at the front is a good idea due to helping you turn better . So putting it back might be a good idea . Let me know how you get on Chris 🚀👊🤘💪🚀

@thomaswalton9089 7 ай бұрын

Is it the same process for the blx esc setup?

@ChriswithaCrc 7 ай бұрын

It’s sure is buddy , thanks for watching 👀 To be quite honest most ESC are the same , there isn’t many that aren’t . I hope that this helps you ! Stay awesome Chris 🤙

@aliasangelalias 9 ай бұрын

Great video, question... before even turning on the transmitter for the Calibration, should we leave the AVS ST, Brake, ST Trim = all on MIDDLE position before turning it on?

@ChriswithaCrc 9 ай бұрын

Yes buddy leave them all central and then follow the steps to calibrate . Hope this helps Chris 🤙🤙😂😂😂

@PeteWylieRC Жыл бұрын

Hiya Chris. Hey great info mate. You know I've done the throttle setup before now but not the steering end points. I just use the steering rate knob on the transmitter to make sure it's not forcing the steering too far. I guess that the end point setup is useful if you can't get it correct in both directions using the steering rate knob. Anyway good to see it demonstrated so clearly. Has the Outcast arrived yet? I bet you take it out despite the shite weather 😂 Best wishes mate 😁

@ChriswithaCrc Жыл бұрын

Hey there Pete , Hope that your well buddy , thanks for watching , yeah I do it this way to then know that the servo can’t overstretch itself when I’m kicking it’s backside . And then it’s still allowing full motion of the steering , the dual rate I only use when I’m trying to dial in less movement when I bashing if the truck is under or over steering for example . Ah thanks for the kind comments it’s very hard sometimes to get the point across without faffing it all up lol 😂 As for the outcast well no actually I’ve not taken it out yet , video came out this morning on the unboxing and first thoughts , plus I fitted some goodies to it also . Stay amazing Pete 🤙 Chris 😎

@markg852 2 ай бұрын

Thanks so much for the step by step setting up the steering/throttle! I have a Kraton 4S V2 and am still learning all the tips and tricks to set up properly.

@ChriswithaCrc 2 ай бұрын

Hey man , no thank you for watching 👀 really glad this helped you , just glad it’s hit the right spot for many . Stay awesome Chris 🚀🤙🤘💪

@delmartinez9349 6 ай бұрын

Great Video helped a lot!😊

@ChriswithaCrc 6 ай бұрын

Your most welcome buddy , Im so glad that you found the information that you needed . If you should want to Subscribe it would really help me out and the community we have . Stay awesome Chris :)

@Bullybeef972 5 ай бұрын

Thank you sir for explaining thoroughly! You da man. Subscribed :)

@ChriswithaCrc 5 ай бұрын

No worries at all buddy , So glad this was helpful for you . Stay awesome and thanks so much for subbing Chris :)

@chadwilliams3667 6 ай бұрын

Very informative, and really useful. Thank you for taking time to show this process!

@ChriswithaCrc 6 ай бұрын

You're very welcome! Really glad it helped buddy . Stay awesome Chris :)

@brianreardon7700 5 ай бұрын

Great info taking my new arrma outcast out this weekend.. thank you I will subscribe

@ChriswithaCrc 5 ай бұрын

Thanks for the sub! Sure do appreciate it and also the comment , glad to hear that information is helpful for you guys . Stay awesome Chris 🤙🚀🤘👊🔥

@chelmswoodjunction Жыл бұрын

hiya mate a massive well done on reaching the 600 sub mark the cannel is moving forward nicely. great how to video as always must admit i need to do this on my dr8 will get to it one day lol. one thing i did notice when you was on the head cam the front wheels looked like they was facing away from each other which was strange. keep up the hard work mate and you will surely get to the 1000 sub mark very soon we all hope. hope you and the family are all well and we have had the rubbish weather here in brum aswell. peter anne and ella

@ChriswithaCrc Жыл бұрын

Hey there Peter , Massive thank you for all your support buddy , so happy that you guys are happy to watch and hear me speak about my findings and how much I enjoy this hobby ! So humbled honestly . Yeah I would 💯 recommend you set your end points on every RTR or even new esc as it lets the esc understand your throttle position better and gives you a better feeling when driving and control , As for the wheels yes it’s normal for the wheels to point outwards when having the car off the floor a basher does have a positive toe due to the nature of asking it to turn on a dime and if you look at your rc even when levelled you should have a slight amount of toe , this is exaggerated when the wheels are not touching the floor . Fingers crossed with the 1k mark , the channel is most definitely heading the right way and it’s all down to you guys . Hope you and the family are well Chris 🤙😎🤘🚀🏴󠁧󠁢󠁷󠁬󠁳󠁿

@chelmswoodjunction Жыл бұрын

Hiya mate Well as of now I do have a drone so we will have to put a day together so we can combine your video with aerial footage. Hope you and the family are all well and hope we get better weather soon sick of the rain. Peter

@DanRussell-q8s 6 ай бұрын

Very informative video. I really like and appreciate preventive maintenance videos .

@ChriswithaCrc 6 ай бұрын

Glad you liked it , Im all about preventing issues before they arise to be honest with you . Its easy to do and your servo will last hell of a lot longer . Thanks for the kind words , Stay awesome Chris :)