Organic Style Copper Bezel DIY | Step By Step Jewelry Tutorial

My new book, SOLDERING IRON JEWELRY is here!: amzn.to/4bqiZfA
Quick link to all of my tools and materials: www.amazon.com/shop/laurabeth...
My bestselling soldering book Soldered Alchemy is now back in stock and you can find it here: www.amazon.com/dp/B0BMTFSKBG
How to make a copper bezel with a soldering iron or mini butane torch:
Here are links to the tools and materials I used in the video. These are affiliate links:
28 gauge copper sheet: amzn.to/3HzpI7W
Tin snips: amzn.to/3GmiNO7
Copper strip: amzn.to/35yt5ho
Soldering iron: amzn.to/3ul3dQH
Butane mini torch: amzn.to/34c5nY6
Soldering surface mat: amzn.to/3K53vQH
Flux: amzn.to/3GtbRz2
Flux brushes: amzn.to/3olFv2W
Copper patina: amzn.to/3rldFpd
Steel bench block: amzn.to/3gidKUA
Metal stamps: amzn.to/3J0yuMW
Mallet: amzn.to/3L3bpe2
Follow along and learn step-by-step how to make a handcrafted copper jewelry bezel using basic tools and materials. #jewelrymaking #jewelrytutorial #copperjewelry
This project can be done with a 80+ WATT soldering iron but it is easier to heat larger surface areas and keep them hot with a small butane torch.
This tutorial is copyright ©Laura Beth Love 2019 and may not be republished in any form without written permission from the owner.

[@LauraBethLove]

My newest book, The Broken China Jewelry Book, will be available on Amazon in late July/early August! Be sure to get your copy! tinyurl.com/4ffrm4ys

[@annacornelison4901]

Thank you so much. You are awesome

[@aussiemachandmadeeverything]

So beautiful ❤ i can see that as a ring with resin centre do good 😁

[@tammydouglas1012]

Thank you!

[@samanthasmith8376]

Love it! And I already have everything I need to start the project 😸

[@PawSativeVibez]

Thank you so much for this. I was having a hard time trying to figure out how to color match my copper and solder.

[@Fullinwoolens]

Thank you so much for sharing your expertise!

[@IAMGiftbearer]

Wow! I never knew about that copper patina and had no idea you could soft solder such a large bezel! This is really getting me inspired!

[@Simplylisette]

I learned so much in such a short time, thank you! I look forward to watching all your tutorials, and buying your books too.

[@cindikeelejohnson8339]

Laura Beth, this was so helpful. Thank you!!

[@CraftyHope]

You make this look so easy, I might just have to give it a try. And, thanks for introducing me to the copper patina. I'm a big fan of the novacan black, but haven't even use the copper. I can't wait to see what else you share.

[@pyrosketcher1490]

Really excellent video. Thank you!

[@S.MCOPPERMART]

I deal with copper ...the concept of jewelry is amazing

[@ethereal369]

SUPER helpful information ~ Thank you!!

[@moonsofourmother2815]

Thank You! I am going to be more determined with my attempts to solder. Thank You.

[@LauraBethLove]

Thanks for watching 🌻

[@kjirstenboucher9682]

Lol... I just aked a question on another video about the copper patina. Guess this answers that question.😂😅 I do love these bezels!🥰

[@lynnfleming9432]

I just found you and I am binge watching your videos. Love your etsy shop. I also thank you for sharing your knowledge and expertise.

[@LauraBethLove]

Thanks Lynn!

[@jademckay-robinson8447]

Loved this video 🙏🏽 So easy to follow, and has definitely boosted my confidence in restarting my jewellery projects! These bezels came out so beautifully. Thank you for sharing this tutorial, and will defo check out your book you mentioned ✨🔮🌹 have a lovely day! Xx

[@LauraBethLove]

Glad you enjoyed the video, and good luck with your future projects! 🌸

[@babaranwar5462]

Lovely video

[@cristianebregge8004]

❤❤thank you so much

[@tracyboudreau4266]

thank you

[@AS-oj3cw]

Helpful!

[@LauraBethLove]

Thanks for watching! 🌻

[@malcolmthompson9848]

When soldering bezels, heat the piece from below otherwise the solder will climb up the bezel instead of the plate. I only use silver solder on copper

[@hectorgarcia8691]

self taught jewelers are the best !! thank you for sharing your craft

[@jenniferb.6476]

Thank you so much for the tutorial - so informative! Quick question, do you ever use a tripod stand with mesh vs the brick and if so, are the results different? Also, does the patina lose color over time such as plated jewelry?

[@LauraBethLove]

You may need to polish it over time

[@chicken_ornery7719]

Thank you for the great tutorial! If this is used as a pendant that sits on the skin, do you coat the backing with something to prevent skin discoloration? Also can you pour resin in side the bezel once it's finished?

[@LauraBethLove]

Yes I show how to do that in the next video so be sure to check it out

[@nstyle-jewelry524]

hi, Laura, so if i right understood copper sheet is 0.3mm (28 gauges) but strip copper is 3mm(5/32inc)?! why sheet less than strip? it's big difference!

[@nstyle-jewelry524]

why not same thikeness?

[@lorenegade1271]

Loved the video! What flux are you using? 🥰

[@LauraBethLove]

In the description

[@yourpracticalmystik8593]

Thank you! I’m also self teaching currently learning soldering. Does the patina work on paste solder?

[@LauraBethLove]

You know what? I don’t know the answer to that because I’ve never tried it… You would have to try it out and let us know!

[@yourpracticalmystik8593]

@@LauraBethLove ty for your reply! I’ll get some patina product and give it a try.

[@shelleymacdonald6965]

Great tutorial. What size gage is the 1/4 strip copper that you use?

[@LauraBethLove]

I forget off the top of my head but it is in the description

[@karensintuitivejewelry]

Hi Laura Beth! I’m having an awful time getting good results with the copper patina! May I ask what solder you use to achieve a bright shiny effect? I’ve tried 2 different solders both with no or low silver content & I’m wondering if the silver content is the main factor I’m missing? I did note that you were using silver solder with a torch in this video but have you used the copper patina in soft soldering techniques? Thanks for your help!

[@LauraBethLove]

Hi Karen! To answer your question, this IS a soft soldering technique and I am using regular lead-free soft solder - the torch has nothing to do with it being hard or soft soldering. Soft just means I am using metal with a lower melting point. You could do this project with a soldering iron instead of the butane torch but it just would be more difficult and take longer. Copper patina can be tricky to work with. I am using regular lead-free solder (I don't recall the exact brand I used that day but check in my video descriptions for my most recommended brands, I usually have links to Silvergleem) Copper patina takes a lot of of "scrubbing" (elbow grease) to get a good finish and to get rid of the dark spots and the finish is never perfect as you can see in my project! You might also need to try a different brand of patina. There are a lot of different variables/learning curve to the process and sometimes it takes a bit of trying different things. Good luck!

[@jennydaymusic]

Hi Laura thanks so much for this helpful video. Do you know if there’s a patina if you’re working with brass by any chance? A patina that will turn the solder brass colored

[@LauraBethLove]

Not that I know of!

[@johngarcia9030]

Any videos on how you did your bezel. I can’t get the solder to stick .

[@LauraBethLove]

This video shows the entire process from start to finish. Make sure you are using the correct materials (see the video description)

[@heathersmith6305]

I am just getting into soldering.. I'm adding to my cart to make an order.. I mostly use copper.. I see there is copper colored solder available...what are the pros and cons of using copper solder vs silver solder for projects like yours?

[@LauraBethLove]

Well, first off, what temperature does it melt at? You need to examine all these aspects to know whether you can even use that with a soldering iron/what type of torch. So you would have to find that out and/or experiment and see how it works. It's not just the color that is different, it's the metal, and each melts at different temperatures, etc. I know that doesn't exactly answer your question, but it's because you have to first know those technical things/differences. Let us know what you find!

[@jenniperkins4260]

Why do we need a solder gun and butane torch ? I have a solder gun my step father had in his workshop but doesn’t know how to use it. Also what is the solder - are they pieces of metal ? where do I buy that ? And also for the patina can you use alcohol ink? Thank you so much I adore your work I’m a mixed media artist mostly boho jewelry bc there’s so much you can do handmade (gems, glass, resin, poly clay, leather, sari silk, wiring, stamping hammering red copper and more . ) I’m looking forward to making my own gemstone buttons (bc they are so expensive to buy ) I’ve had no clue how to begin and you’ve helped me - thank you ! I have had to teach myself everything it’s not easy.

[@LauraBethLove]

Check out my latest Q&A video where I talk about this extensively! kzbin.info/www/bejne/b3aUqGqNqdSDna8

[@LauraBethLove]

PS I do not think you could use alcohol ink, but you could try!

[@annethammond8384]

Do you need to do this with a torch or can you do it with a soldering unit ? I have a Hakko but I couldn’t get the pieces to melt together not sure what I’m doing wrong

[@LauraBethLove]

Check out my latest Q&A video where I talk about this extensively! kzbin.info/www/bejne/b3aUqGqNqdSDna8

[@MountainAirOrganicBeds]

What gauge of copper do you use? Is there any kind of cooper patina we can use for lead free solder?

[@LauraBethLove]

I think I used either 28 or 30 gauge and you can see in the video that I use lead free solder! So yes, this patina is great for that. Thanks for watching!

[@MountainAirOrganicBeds]

@@LauraBethLove Thank you for making the video. It was very inspirational and informative.

[@LauraBethLove]

@@MountainAirOrganicBeds Thank you Joyce, you're very welcome! I'm glad you enjoyed it.

[@catherinemartina6469]

what are you using for solder? thank you

[@LauraBethLove]

It's all in the description below the video!

[@catherinemartina6469]

do you have to anneal the metal that you are bending?

[@LauraBethLove]

No

[@justinbrackett9186]

Does the copper patina fade off the solder?

[@LauraBethLove]

No, but it does tarnish overtime

[@nicolekruger59]

What kind of solder do you use?

[@LauraBethLove]

It's in the video!

[@deborahhardeman8802]

So what kind of solder? I never have soldered copper. Hard solder, soft solder?

[@leighannwindsor7092]

Hi. I tried to use my soldering iron 100 watts. I failed miserably. I bought the same copper you used and it was a disaster . Help. I really don’t want to use a torch. They stress me out . Lol

[@LauraBethLove]

What failed?

[@nygrl6102]

Having a hard time finding your book Soldered Alchemy. Is it still in print? Where can I find it?

[@LauraBethLove]

It is in high demand but out of print! But I possibly may be offering future copies, I'm working on it!

[@nygrl6102]

@@LauraBethLove Please let me know if you do!!

[@LauraBethLove]

@@nygrl6102 Will certainly announce on this channel! 🌼

[@nygrl6102]

@@LauraBethLove one copy available at Thrift Books and they want $76 for it!

[@S.MCOPPERMART]

Hi

[@Ashley-il6oy]

😢 my copper bezel melted and my solder didn’t 😢😢😢

[@LauraBethLove]

Well then you're definitely doing something wrong! Sounds like too much heat or the wrong type of solder. Lead free soft solder melts at a low temperature.