Orico Dual Bay USB 3.0 Dock Station Review and Demonstration

Connecting and Cloning Demonstration of Orico Dual Bay USB 3.0 Dock Station
Product Specification:
Compatible HDD Type2.5 & 3.5 inch HDD / SSD
Output Interface SuperSpeed USB3.0
Clone1 to 1 Standalone Clone
HDD InterfaceSATA I,II,III
Power Supply12V3A Power Adapter
Data Cable1M USB3.0 Cord
DriverDriver Not Required
Supported SystemWindows 10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above
Dimension132 x 117.5 x 65mm
Max Capacity / SlotSingle 10TB, 20TB Max
Link
www.amazon.com/ORICO-Duplicat...
**************************************************************************
My Facebook ID
profile.php?...
Follow me on Instagram
techinfomania5544
instagram.com/?hl=en
Like My Facebook Page
/ techinfomania-14376905...
*************************************************************************
Music in My Video
CAME BEATS - BAD BUNNY x ARCANGEL TYPE BEAT | No Copyright Trap
Free Download Link
bit.ly/2wFwDek
Link to video
• CAME BEATS - BAD BUNNY...

[@yajnalgibno6536]

Thank you very much. Your explanation are slow and clear which is good to me. Thumbs up

[@ictbreeze1186]

I did enjoy this clear and very deailled information anticipating all kinds of stupid errors humans can do - a marvel of an explanation...

[@techinfomania598]

Thank you

[@rifathussain2956]

Thank you very much. Your explanation are slow and clear which is good to me. thank you

[@budipurnamasitorus]

ulasan ini sangat detail dan sangat membantu saya, terima kasih

[@raphal1]

amazing review, just what i needed

[@romeorefilente6682]

I like the review very detailed ☑️ now im sure to buy the item online thanks

[@MrJomahe0143]

Followed instructions, waited for the three beeps (there were more than three) and pressed start. Nothinh happened. I was not able to clone my HD. Please advice.

[@MrFordShelby]

It was very useful, thank you!

[@everaldpalmer8016]

Great - clear - to the point

[@kaverjordankharbteng2550]

Can we use this to recover data from a failing harddrive?

[@ezral94]

Thank you so much sir

[@h3n7r1kotakuboy4]

What does it mean when it stops on 50% and the source drive flashes?

[@koreanfriedchildren]

I have this same one. Very good.

[@techinfomania598]

Thank you

[@gavenlin6405]

Hi. If my portable hardddisk is WB passport (which is smaller and it is WB designed), can I still use this device?

[@mahaabdillah]

What's a good way to eject, bro? it's still on and the light is still blue, if you turn it off immediately from docking, it means that it's forcibly turned off.

[@hernandoyulianto]

What happens if i did cloning n press the start button 2x times?

[@PREMKUMAR-qq6pk]

Can I connect 2 hdd drive and connect in my modem usb

[@rommscarino7155]

Where is the REVIEW part? Is it good? bad? how is the performance?

[@petiirrzzz]

Does it work to connect to a USB share modem?

[@gamerlandspower5093]

Great 👌

[@Freddie1871t]

But did the target drive say 1 tb or did it show as 320gb?

[@FAKEPLASTICDUDE]

Thanks, so clear explanation.

[@Zero_System81]

I'm using it as of now and it's working great, just wanna ask does it support 5TB and above?

[@techinfomania598]

yes according to there website they said 10TB so 5tb will be

[@Zero_System81]

@@techinfomania598 nice thanks!

[@L0V3Dr3Am]

@@techinfomania598 bro can i use it for nvr or only for pc?

[@waqas76739]

your voice is like from movie Die Hard 3 - Simon Gruber

[@Maga1v3r]

I use this docker on my server. But when the electricity in my neighborhood is down the Orico stays off and I can't use my Server. I have to come home and push the power button to power on the device. Any ideas how to make it stay on after Power outage? Thank you

[@mhmurshed6599]

do you use it for 24/7 ?

[@choongkeat]

What happens if the Target drive have existing partition / data? Will the clone process erase / format the target drive or nothing will happen?

[@techinfomania598]

Target drive must need to be empty. Becasue Target drive will get formated during cloning process

[@hmnwenghweng3395]

Thank you zzt zzt very much zzt zzt

[@rlnwvr]

i'm using windows 10 and the window thing to install driver thing don't pop up like you do. help?

[@rlnwvr]

nvm. got it.

[@universaInformation]

Hi, I have WD My book hard drive that won't power up, power plug and cable works but hard drive itself wont power up, I have so many videos and pictures that I need to recover. If I pull out hard drive from inside and plug it to these will it work?

[@techinfomania598]

did you check the power supply? is it working? any led light turning ON after connecting WD my book with power connector? it may work or may not, not sure, but if i were u, will definetely go for it taking out from the case and trying it connecting with it that you ask for it

[@universaInformation]

@@techinfomania598 I attach [pwer cable to my trimmer it works, but when I attach back to hard drive led light wont turn on and device not visible on pc.

[@danijel124]

Does it work well with usb 2.0?

[@jakeiflores]

Will a partitioned drive be cloned? I want to install an OS to to Source HDD then install it to Destination HDD that is partitioned.

[@techinfomania598]

It clone the source hdd just like the way it is, if source hdd have partitions then yes will be clone but target hdd must be at same or in bigger size

[@Mrhawklanz]

after cloning will it be 320gb or will it be 1TB. Because some docks will not make use of full size.

[@techinfomania598]

Same amount, no change, if cloning 320gb on 1tb, it will clone 320gb and rest amount will be same as a free space

[@Freddie1871t]

How do you add that free space?

[@chiefhamim]

Can you use 2 Toshiba x300 4TB 3.5 hard drives with this bay? Will the PC recognize the HDDs as two drives or one?

[@SquarePadMusic]

It will be recognized as 2 individual 4TB drives.

[@richardlampa7944]

Can you plug 2 hard drives simultaneously to be read by the PC?

[@techinfomania598]

Yes, i am using it, 2 HDD connected same time, data can be move also, read and write

[@hipsdomz7208]

tHE BEST

[@eirikTP]

Will this dock work on Mac?

[@LimsuL08]

when i start to clone after 1 or 2minutes the led indicator stopped and the source is blinking

[@techinfomania598]

Are your hard drive working good. I mean the source and the target one. This happen when one of the hard drive having trouble

[@fitandrightoslob]

same as when i tried it.there is nothing problem with one of my hardrive but when i started cloning the target stopped at 75 percent within 5 minutes and the source keep on blinking? what will i do now? please! what kind of hardrive trouble it was you are mentioning Sir and how will it made to work?

[@Sorjen108]

@@techinfomania598 I am also facing this issue The Source HDD is a 500GB Seagate (3.5"), the Target HDD 1TB Toshiba (3.5") Only the 75% indicator light is on, the Source light is blinking and the Target light is fix Can you help please? Thank you

[@PauonYT]

When you clone one harddrive bro, does it also clone the os and etc?

[@techinfomania598]

Yes dear, what ever source HD have will clone same, OS will clone too

[@PauonYT]

Thanks for answering TechInfoMania, i have another questions too. Example, i have a hard disk that needs to be reformat. But now, if I am going to used that HDD that needs to be reformat as the target to be put other files in cloning, will it work properly or it should be empty first before inserting it and cloning it?

[@GoldSeals]

You need IDE adapter to clone IDE drives

[@justw4lkbesideme]

any sas type?

[@Jeeprassic]

Don't buy the older model (5828C3). It does not have the switch between clone and PC. When placing the drive in the wrong side of the doc, it destroys the directory of the drive and then asks to initialize the drive. I sent it back. Can't have that happen with your valuable backups.

[@kaverjordankharbteng2550]

Can we access two connected HDDs via PC at the same time?

[@techinfomania598]

yes

[@bjjm9772]

So... You can't use both hard drives at the same time?

[@techinfomania598]

Yes 2 hard drives can be connected and can be use same time with windows.

[@bjjm9772]

@@techinfomania598 Thank you!!! I thought it was only for clone

[@geraldsyta6890]

Wow 4 hours!!!!!

[@geraldsyta6890]

Cloning 1tb at this moment!!!

[@RalphYapMD]

Can it clone even if the old hard drive has 2 partitions?

[@techinfomania598]

yes, same thing will comes to other HD

[@RalphYapMD]

@@techinfomania598 thanks

[@bhavinshah5652]

1 tb laptop hdd windows10 installed. 1tb hdd to 240 gb ssd clone hoga

[@techinfomania598]

data agar 240gb say kam howa to ssd may clone hojiga

[@feliperafael8104]

do this works on raspberry pi?

[@gmr2gnr]

Curious too

[@feliperafael8104]

@@gmr2gnr Hi I bought, and it's works, now I have 6TB on my rasp 3 as local cloud.

[@gmr2gnr]

@@feliperafael8104 perfect! Thanks for responding 😊

[@JS-sf1dw]

@@feliperafael8104 Hi Felipe, I face serious usb managment issues with this station on W10. Orico sent me a firmware update but I have difficulty to deploy it. Are you available for little help ?

[@Maga1v3r]

I use this docker on my Pi server. But when the electricity in my neighborhood is down the Orico stays off and I can't use my Server. I have to come home and push the power button to power on the device. Any ideas how to make it stay on after Power outage? Thank you

[@sncat]

Я хотел купить это устройство. После просмотра видео, я передумал покупать, изделие очень не удобное. Кнопки управления на задней панели, это очень не удобно.

[@AtifKhan-el2bo]

Hmmmmm

[@Akasahmed]

the only thing this dock station is good for is to clone..maybe...do not buy this for file transfers