Origami Acorn (Beth Johnson) + Spread Hex Tessellation (Eric Gjerde)

Don't forget to like and favorite this video :)
And read the video description for more info!
Origami Acorn desined by Beth Johnson (bethorigami.wor...)
Spread Hex Tesselation designed by Eric Gjerde. From the book "Origami Tessellations" and also on his website: www.origamitess...
Presented here by Jo Nakashima with permission of the creators
Difficulty level: Intermediate
MY PAPER:
Two sheets 15cm x 15cm before cutting into hexagon (7,5cm each side) and circle (12,99cm of diameter )
● Copper Tissue Foil for the top
www.origami-sh...
● Brown Tissue Foil glued into a thicker paper
www.origami-sh...
ACORN BOTTOM CREASE PATTERN:
● Download here:
bethorigami.fi...
HOW TO PRINT THE CIRCLE WITH THE CORRECT SIZE:
The document is a square (including the blank area) with the circle on the center. Just print this square with the same size of the initial square from which you cut the hexagon. You can do that by adjusting the margins before printing
SPREAD HEX TESSELLATION with Normal Speed Collapsing:
• Origami Spread Hex Tes...
TOP (ADVANCED VERSION):
• Advanced top of origam...
Follow on Facebook: / joorigami
Instagram: / jonakashima
======================================================
Music: Moon Lounge Omicron Prime
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
incompetech.com...
The Rain
KZbin Audio Library - Silent Partner .
========================================
Commercial use is not allowed without prior written permission from the author.
Please contact the author to ask for commercial licensing
======================================== .
Moon Lounge Omicron Prime - Kevin MacLeod (incompetech.com) licensed under Creative Commons: By Attribution 3.0 License (creativecommons...)

[@jonakashima]

[@pampao9726]

Tân Tuna because you use vietnamese

[@hipleasesubscribe1625]

I subscribed

[@GerryKHT]

⠀

[@origamicommenter1255]

.

[@probablyruth]

Why didn’t you post anything?

[@jonakashima]

Migel marquez, as "partes difíceis" que eu acelerei *não são partes difíceis*, são partes *repetitivas* de um procedimento mostrado 6 vezes antes em velocidade normal

[@tomjohnson436]

scrat's nut

[@luisangelrinconcueto9337]

OMG, one of the most AWESOME origami figures I've seen, without a doubt a great job, congratulations Jo Nakashima

[@rockmonkey11100]

5:42 i can easily do that 5:52 .... ok i will do that too 6:02 ...this becoming annoying now 6:26 Oh my gosh....... 8:15 FINALLY DONE! 8:27 FFS * throws paper in the bin*

[@WarningTrolllAlert]

That is why I always watch the whole video before making anything xD

[@FunZack11]

WarningTrolllAlert I just look at how long the video is xD

[@adriantee5219]

Me too!!

[@noahtrue2114]

Amen

[@tiffanychang8614]

Patience is all it takes for this origami....

[@jonakashima]

+michael freeman video description

[@PINPAL]

여김영주 bethorigami.wordpress.com/instructions/diagrams/

[@Alex-wy7il]

+여김영주 it is in the Video discription.

[@denniskind9109]

+Jo Nakashima i've took a 15cm square and cut out my hexagon but the circle in the pdf is to big and i can't change the size and the link in the pdf is deleted

[@murttun738]

me too

[@jonatasdavimacieldeoliveir147]

Jo Nakashima - Origami Tutorials

[@christiandanielgil7479]

No entiedo porque no tiene 1000.000.0000.000.000.0000.0000.000 likes si lo explica demasiado bien y hay que tener pacienciencia huf!! Mucho apoyo jo nakashima❤❤❤💕 tour chanel is the best!!!!!!

[@sibs2126]

My dear, you are a great artist and teacher … I love your tutorials and it is so nice that only the sound of the paper is to hear... and you have such beautiful hands

[@harddatrium3458]

And I'm half way making this, just cz Jo Nakashima's tutorial is so easy to understand!

[@miner4diamonds424]

Jo, your tutorials are awesome, you do it very clear, and I can't think of a way that you could be more awesome. Thanks!

[@jt-ub1on]

I'm new to origami and I started reading origami tessalations by eric gjerde and picked for my first the spread hex tessalation and I was having so much trouble doing it. My fourth layer of hexagons was such a mess. Lucky for me you did this one, I didn't do the acorn but the spread hex came out awesome and so easy with these instructions thumbs up

[@toni7575]

i did it! it took me 3 hours but i managed, very nice instructions but this is definetly not intermediate. had as heck but worth it. the top part is very hard but satisfiying to do once your brain gets how to do it.

[@kolibri9132]

It took me 2 hours to make it but I finally did it and Im just 11 so you could too.

[@br9906]

It took me 6 hours +

[@jasonweng5579]

But I'm 12

[@andreamangia5965]

I do prigami once I was 8 yrs old and I'm 12

[@folderfolderson7042]

But im 7

[@folderfolderson7042]

So eazy

[@thepigasus]

I want to make this model, but the link for the bottom pdf doesn't work?

[@alfonzfistron]

I did eight acorns. the Scrat loves them, so I must have done it.

[@toquival]

Oh goodness! My acorn looks more like a pineapple. Guess I need to practice more! :D

[@jonakashima]

origami katakana yup

[@HansDybkjr]

An excellent instruction video on a great, complex model. Thanks!

[@tinakhithani2454]

Hans Dybkjær

[@michaelfreeman1066]

thanks, but i red the description and i don't get how i get the printed pattern templet?

[@jonakashima]

michael freeman there is a link, look for "ACORN BOTTOM CREASE PATTERN"

[@michaelfreeman1066]

Jo Nakashima ware?

[@SupperOsum]

Hi Jo. I was wondering how you personally feel about prints and specially shaped paper. Do you think that using a circle is no different than getting different sized squares or is using a non-square shape cheating in a way? What about prints and etches?

[@mathewsamuel8490]

Watch the video from 17:25, It's really satisfying!

I just made this model, it's awesome. You made great video, it's not so hard when u know how to fold this little pieces on top. The thing is I used thin paper because i don't have foil like you. Anyway ty for this video and i will like to see more model made with this technique you used on top part. :D

[@markz8353]

I FINALLY DID IT AFTER 3 DAYS OF STRUGGLING

[@frantisekolbricht5493]

Very, very nice. Ostáva len obdivovať presnosť a šikovnosť rúk.

[@acura108]

When I went to the link for the cp for the bottom of the acorn, it showed a page that said "the content i was looking for was either moved or deleted. " Is there another way to find this cp pattern?

[@johnmarkramos8642]

I have this problem too...

[@rozkangalaxia7639]

The 32 folding part was so goooddd 😂😂

[@Synderai]

Awesome video.. One thought though, maybe next time you could do the first part of each step slower for those of us not use to doing tessellations. You know so we can get the hang of it before you super speed through it and slow down at the end of each step.

[@theunknown1545]

@Jo nakashima the paper is unavailable at the origami shop link (which is in the description) so if I want to make it, where do I get the paper from? Are there other options? Also, can you tell me the link for the paper at the bottom of the acorn? Thanks.

[@jonakashima]

the link was broken, but I fixed it

[@theunknown1545]

Oh, ok I mean, I don’t know how that’s supposed to work. Also, if I want to buy any paper, how do I exactly do it, as it really won’t get shipped ‘worldwide’ these days... and I have many of your projects pending like the scrat and the devil dragon.

[@chenyingwang6593]

I‘m mesmerized by this...how the fuck did you come up with it?! It's UNCANNY!!!

[@thepowerfulbudder9957]

Hey Jo I know this is kind of a bad question but, whenever I went to the website to print the crease pattern, it wasn't a square, but a rectangle along with the "ACORN BOTTOM CP" title, and I'm not sure how to save it and print it to say a 15cm by 15cm square. Sorry if this doesn't make sense, but if you or someone could possibly help me, it would be great! Thanks!

[@Melon_Cloud]

Wow, during the video: see also advance version! I think this is already pretty advanced!! But I just started, so maybe it's me.. But this is a freakin masterpiece!!

[@jasperlee2295]

For the brown tissue foil glued on thicker paper used for the bottom, would printer paper be thick enough?

[@markpalser6852]

Great video. The links to Beth's diagrams don't work anymore but I found the crease pattern for the nut online elsewhere. I followed the advanced video to the sticking out bit on the cup but I think on balance the basic version looks better.

[@gaelmoron9389]

Where did you find It? I cant find It anywhere online

[@markpalser6852]

@@gaelmoron9389 I've sent a note to Beth from her website contact page mentioning the broken link: I can't find it any more myself now although I did download it so I have a copy.

[@OrigamiTwist]

This is amazing! I will definitely be trying it! Thank you!

[@probablyruth]

Origami Twist.

[@MeatBall_RBLX]

When i first saw the corn: IT IS BEAUTIFUL, I WANNA MAKE IT😮 when I watched just to 10 minute: I mean is all right😅 When I watch to the end: MOM, I’m blind When I watch it second time: is actually not that hard When I started making it: * TOSSING THE PAPER TO THE BIN*

[@megaconure]

my thoughts: this looks really cool!!! *looks at the length of the video* wait. *reads some of the comments* "too fast" maybe i wont do this:(

[@Supershreeko]

I had trouble too. I figured it out by first practicing on a hexagon that had only 16 lines across each parallel lines. it came out much simpler, but prepared me for the 32 folded one. made the model much easier.

[@megaconure]

maybe ill try it after all!! thanks!! ^ ^

[@LiorKest1]

Wow! That's genius! And tha paper you've used is very beautiful...

[@mauriartycreativeitems6349]

I just wanted to ask where do you purchase the Copper Tissue Foil (top) paper from?

[@leo25440]

eres el mejor gracias por compartir tu arte... saludos de venezuela

[@GovermentElectronics]

If I make the squirrel 40cm then what size should the acorn be?

[@tronix2125]

Erik_The_Epik 15 cm I did the math you're welcome

[@mvbp24]

This video is fantastic!!! I love the acorn :-) Este vídeo es fantástico!!! Yo amo las bellotas:-)

[@theunknown1545]

Jo where do I get that printed thingy tho it’s very good planning to make the scrat soon

[@jonakashima]

link in the video description, it's the last page of the pdf

[@theunknown1545]

Thx jo also u can make a pixelated sphere soon like how people make it in Minecraft. I would prefer u see it. It refers to cubed numbers. Even if it’s big, it will be worth a try. Also, I’m ur biggest fan...

[@franciscorios4873]

Thanks 4 your tutorials they are so clear and good

[@crummihunni8335]

Its really pretty! It looks like a beehive:)

[@manasi.k97gmail.commanasim89]

I'm not getting acorn top paper so which paper should I use sir Jo?

[@brandincason1715]

8:24 you can feel his frustration as he's flattening and turning the paper XD

[@joedsongomesprodutorcultural]

Que coisa genial, espetacular! Merece 1.000.000.000.000.000.000.000.000 de likes!!!

[@graced.neitham9117]

Hello! I watched the video and I wanted to try it, I don't think you are gonna reply but if anyone reading this. I don't have brown paper (I have other bright colours like red,green,yellow etc.) So hypothetically if I was done making the top part of the acorn can I use the printed sheet to make the top? If anyone tried this or know we can do this please reply. Also I don't know how to print the circle and the blue lines in it, I know you explained in the description but I can't seem to get it.

[@sicapanjesis3987]

As I see, top is the harder part, so if u don't use a good origami paper, u are not gonna succeed...

[@nicolasmiecznikowski4654]

Eu consegui eu se escrevi no seu canal jo voce e o melhor origamista que eu ja vi

[@ronaldinhogaucha7802]

So much simpler than the scrat. Although the scrat took me 30 minutes to fold, and the acorn took me 1hr 30 min to fold.

[@doreenwinsor220]

Please advise me as to the type of paper used and where it may be purchased. Thank you.

[@jonakashima]

links in the video description 🙃

[@cindychua4838]

I don't understand where/ how can I find the link for the circle print out? I just can't find any link to that. If replying here is difficult at times, you may like to include it in the facebook? So that it's easier haha... just my humble 2 cents. Btw this video is awesome!!!

[@juanpablobenjumea4636]

como hago para que el circulo de la descripcion de el video se pueda poner de la medida que es (12.99cm)?? Gracias

[@jonakashima]

El documento PDF es un cuadrado (incluyendo el área en blanco) con el círculo en el centro. Simplemente imprima este cuadrado con el mismo tamaño del cuadrado a partir del cual se corta el hexágono. Puedes hacerlo mediante el ajuste de los márgenes antes de imprimir

[@blupaw45]

i really liked the top so i just made it a tessellation. Very cool btw, one thing if you could slow it down a bit, i made it but it took me a long while.

[@andreavera7943]

wow! i'm really impress! can you make an origami beaver tutorial? I just can't find one and I would love to see one by you

[@_Mercival_]

Caption around 28:00 - Make a point I don't really think that's necessary. Anyone who got this far has already made far more than enough point if you ask me...

[@sicapanjesis3987]

Lol

[@p07a]

Sick! So awesome I think it must take 1 a hour or something

[@yuhunggoh7628]

Finally done it! Although it was quite frustrating trying to put the two together...

[@salty_d0lphin361]

k k

[@AtharvGoel]

Can i use copy paper? (Because that's the only paper i have)

[@alekgrabinski]

Thanks for making this video for us.Great details!

[@yangheepark8299]

no

[@saltnlight52]

Hi there😊 What kind of paper did you use in this video?

[@Henjo29]

Hello! Do you make your own paper? If so, how do you do it? It looks great!

[@GovermentElectronics]

Henjo29 he doesn't he buys it from origami shop.com

[@luishagenauer6538]

is it important that i use tissue foil jo nakashima?

[@jonakashima]

No, it is not

[@odsivalmoutinhoverly4340]

muito linda essa ''noz'' de origami,da pra ver que e bem dificil de fasela,so vc mesmo jo,pra faser com tanta tecnica e perfeiçao!

[@pomidorowypomidor4144]

From witch link the description can you print the bottom of the acorn?

[@jonakashima]

ACORN BOTTOM CREASE PATTERN: Download here: bethorigami.files.wordpress.com/2013/11/acorn-tutorial.pdf you just need to expand the description to find it

[@pomidorowypomidor4144]

Thank you

[@trentbeale4798]

very complex and very awesome great job!

[@Leon024]

+Jo Nakashima The page for the bottom half is gone... What do I do?

[@leejuhsu]

+Leon Lee bethorigami.files.wordpress.com/2013/11/acorn-tutorial.pdf

[@rezomebank1353]

Thank you🌹

[@jinception01]

could you make this out of just regular kami paper?

[@Coolpackers]

The link for the bottom of the acorn doesnt exist please help

[@noahtrue2114]

the diagram for the bottom of the acorn is to big. what should i do?

[@nilmarmelodosreispintonilm5825]

Belíssimo. Parabéns.👏🏻👏🏻👏🏻👏🏻👏🏻🙏🙏🙏🙏🙏

[@Flawake]

waar haal je het ronde papier vandaan waar je de lijntjes moet overtrekken

[@fatcookie1000]

I don't understand how I can adjust the margins in a PDF file. Can someone help me?

[@mjaslam09]

is the paper you are using strong?

[@fertubado]

obrigado Jo, a ti e à Beth e ao Eric.

[@dwijv8750]

hey jo can you teach us how to do the bottom part without printing because i dont have a printer :(

[@moonbeam1691]

what paper did u use for it? i dont get it ._.

[@Algorhythm027]

could you try to make robert lang's horsefly? ive seen pictures on his site and have instructions, but they are far too hard to follow.

[@marcusbosnic1305]

17:13 ...and that's when you know it's a jo nakashima tutorial

[@alltypesofthings4559]

i donot have printer so can you give the method to draw those creases on circle

[@typo691]

Can you *PLEASE!!!* tell me what and how many books do you have by Beth Johnson

[@jonakashima]

none...

[@yilmazburhan2650]

إلززنمططظتلسص ﻷر

[@typo691]

yilmaz burhan what? also no need to reply this is too old

[@MartinR33832]

hola jo tengo un problema no hay forma que saque el circulo de 12.99 no se como achicarlo si me das una mano al subir el circulo achicado estaria buenisimo desde ya muchas gracias

[@jonakashima]

El documento PDF es un cuadrado (incluyendo el área en blanco) con el círculo en el centro. Simplemente imprima este cuadrado con el mismo tamaño del cuadrado a partir del cual se corta el hexágono. Puedes hacerlo mediante el ajuste de los márgenes antes de imprimir

[@progamingab2455]

Sir, Can You Please Tell Me The Margin You Used In The video Please I Can't Find The Perfect Margin 😢

[@jaketeabo9973]

Where do you get ur paper for this origami acorn?

[@wilbership]

jo nakashima is amazing !!!!

[@samruddhaa513]

That was so nice Jo

[@dominicappleton3890]

where did you go to learn origami

[@ncntdragn]

Gracias por el tutorial... logre terminarlo ❤️❤️❤️❤️❤️

[@yungtravo]

Where do you get your paper?

[@jonakashima]

Link on video description ;)

[@rayyanrayyan4872]

I make squrillel also and acorn also thank you for sending this video you are my Best friend

[@SukhvinderSingh-ty3sh]

hi jo i want to download the pattern to make the botyom how can i download

[@oktay944]

Bayıldım, çok güzel, ellerinize saglık😊👏🏻🇹🇷

[@jepl11]

how long did this actually took you?

[@alyssashih2895]

26:32 it looks like bread

[@cayocarlos1]

what kind of paper did you uuse?

[@origamikatakana]

Thanks for your tutorials!

[@игорькаток-ф1щ]

how to make the bottom of the acorn do not understand

[@Chicago60644-p]

How many hour it takes?

[@PentameronSV]

How to spend a year of your life.

[@jhedricksotto8189]

No how to spend your life

[@origamikatakana]

There's one thing I wonder: did you get permission?

[@thijmenmeijer9533]

You have to let shrink the base of the glans.

[@KHR97]

happy birthday vid!

[@bigshottm9302]

I kinda shaped the top by not using the Spread Hex Tessellation instructions. But mine But it still looks good.