ORIGINAL Hoonicorn Parts for Ron’s Gymkhana GRiD Evo IX

[@43Disciple]

LETS GO! That handbrake has Ken’s energy, it’s science. The evo is my favorite Grid build so far, sorry guys. But Ron did go full Gucci on the build.

[@_Otaku-kt8be]

KB43VER

[@blakeog2034]

Idk wtf Scotto is doing over there lol

[@jasonabell8631]

The Godzilla blazer has to go on grid for the lols

[@patrikpolda]

​@@jasonabell8631 it will go million MPH on the straightaways but 2MPH in the corners 🤣

[@andrewmackemzie4565]

#KensPattenedScienceEnergy

[@Mldavis1214]

Easily the nicest car of the group. If the transmission shows up then it’s an easy W. That handbrake hits you in the feels.

[@Runna88-w1m]

5th finger

[@stevebarnette]

Double-barrel hood exit is rowdy street race car style. 👌🏻

[@HooniganProjectGarage]

Gotta do it for the Internet

[@nathangee7075]

Scotto: “we don’t know how to work with gear this nice” 5 minutes later Jameson’s cutting pipe with the hose-clampomatic lol, Scotto wasn’t kidding!

[@ViRtUaLheretic]

In case you didn't, make sure you added a rubber grommet where the new brake lines come into the car so they dont rub on the chassis and eventually cut the new lines.

[@RobYeates]

Glad this got called out, basically a single circuit brake system now - one leak == no brakes at all..

[@jerodTSI]

I just commented this lol

[@RobBrewerSARGuy]

My thoughts exactly when I watched him feed the lines through

[@andycapp1981]

How can you not dig Ron’s enthusiasm. This is gonna be sick

[@wiggidywakwak]

Top tier Rontent

[@BrettFalc]

Shit Car being stripped down to bare chassis means it's either being reborn (finally) or scrapped (finally).

[@HooniganProjectGarage]

It's Schroedinger's car. it's both scrapped and being reborn at any given time

[@foamdataservices]

@@HooniganProjectGarage That was a deeply philosophical reply, didn’t expect that lol.

[@Soaryjp]

A 43 brace to tie those waste gate dumps together would be sweet

[@troythetinkerer]

I love that almost everyone has builds going right now. We get new Hoonigan videos almost everyday! Very happy to see Kens' old parts finding new homes.

[@TheRealTerranMarine]

Hell of a tool storage set-up. I'll give you guys a week or two before it's out order

[@ThomasBlithe]

That long? I give it 4 days

[@jeffreywilliams8927]

That is far from a little thing, that's a big part of Hoonigan history you'll never see anywhere else. Awesome job Ron!!

[@kylelanger4234]

Can we just appreciate the, gift of a man, Ron is..... he explained that handbrake system so well... ive heard before, that if you cant explain the subject to somebody who doesnt know anything and have them understand it, you dont enough about it to claim to know what youre doing....

[@Yvolve]

22:02 Please put a grommet on the flex lines if you haven't already, so it is held in place where it goes through the frame. That lines are going to be rattling around with the forces it'll be under doing Gymkhana, and can get damaged by the holes they pass through, with no easy way to inspect them. It would thoroughly suck if you suddenly find yourself without brakes, heading for a hairpin with K-rail barriers. Or a cliff.

[@thejacksonmurphy]

“If you can’t find the tool you need in the garage, you don’t belong near a car” is all Boxo was thinking when they partnered with you. Props boys!

[@oughtnot]

GZ on that holy relic of a handbrake. Also I like how the shop just gave you some jack stands while everyone else gets a lift.

[@HooniganProjectGarage]

Ron can't shake the rally roots, they're always working off the ground

[@Taintlessdisc]

Just wanna say thanks for letting us in on all the lil ken block easter eggs in all the cars and in general just keeping his memory and legend a part of hoonigan we the veiwers appreciate the honor and respect you show in every video for a hero we share with you!

[@jimk2762]

“I want this thing to look oem as possible” Has flames shooting out of the hood 😂

[@Yvolve]

Isn't that how Mitsubishi really wanted to do it though, secretly.

[@Pictoru2]

Brah, Jameson is KILLING it this new 'season'! But...really now, what in the hell is my man Suppy?? These boys need some Suppyrvision!

[@aaront4494]

Bro, the hand break is so great. It is awesome that things like that are still around from Ken and that his “family” can still use them.

[@bpsprintservices1961]

+1 for the Jameson and Angelo with the bolt-on boys show

[@adamjulian_drifts]

That whiteboard was incredibly concise

[@bennyfactor]

This one is the best looking build so far. Bolt on boys represent! Also the gold foil heat tape gives a real classy aura to the exhaust / dump tube area.

[@Simyo69]

I'm not even a mechanic but this white board section was instructive as hell. The entire series is sick content, keep it up guys!

[@matthewmckibben7445]

Great job RONCAR. Love seeing all you guys (&gals) doing what YOU want. Party on.

[@JambonJovii]

Can we all agree, regardless of results between Scotto, Ron and Vinny... .., Jameson built the best car.

[@Harry_Gersack]

underrated comment 😂

[@baddaddybrady2]

🙏Keeping ken in the car👍

[@changes8]

First of all Omg boxo!!!!!! Second of all 😢 seeing Ken block. Legit crying 😢 I wish he was alive rn to see this tool box…. I can see not imagine how much his family misses him 🥺🥺🥺

[@christycullen2355]

This or Scottos builds are my favourite atm. Vinnys is a close second

[@Mldavis1214]

Yeah Scottos build made me realize how compact and op a vr6 can be after looking online. Turbo of course

[@FastLaneLyfe]

So you gonna 💩 on Gary and Zach like that bro? You need to seek counseling and find someone who will help you!!

[@z31drifterlf]

Love the clips from testing at Metrolina expo, we based the drift track on Ken's rips.

[@gavin-8041]

That’s a god damn legendary item right there

[@BuRn928]

This dude really using jack stands when he's got a whole garage to use? Crazy man! Looking like an insane build so far! Love it!

[@jamessizemore7103]

Loved the whiteboard diagram

[@JasonAJames]

The whiteboard cleared it up for sure. Slick set-up

[@bigdfitness5020]

"The trick is you have to pretend you know what you're doing and then it usually works." I've been doing that my whole life lol 😂

[@benjaminbeebe9182]

The white board expo needed more lab coat😂😂 Love this build!!

[@dakotalenzi7630]

Fuckin love Jameson dude, keep him around forever!

[@joederue9900]

man I was hoping for a "I'm Dr. Boxo, I do Carcaine!!!"

[@HooniganProjectGarage]

Ahh yes, a man of culture we see

[@ViRtUaLheretic]

k k k k k k k k k yeeeeeeeeeeeeeeeeah!

[@562frankrivers2]

I can say I’m jealous and happy for you guy cuz all them tools now we should get more completa 100% builds

[@davidblanck4131]

You don't know how much this build speaks to my heart lol. I'm essentially planning on doing all the same stuff. However being modular to a RWD configuration. The clincher..... I'm planning on making it all work in a Starion. Even if I don't finish. I'm at least putting time into it now.

[@MishraArtificer]

The world needs more Starion/Conquest builds!

[@azamuddinsuhaily]

here! damn unbelievable to become one of the earliest this ep

[@boznorris527]

RON THE DON has got this in the bag, big ups man 🤙

[@justini2351]

Boxo hooked y’all up! Now we should see builds built with ease!

[@felixmasis6919]

10MM SOCKET, coming to a Hoonigan Project Car engine bay near you!!

[@5ter1ingNothings]

Ron you should get that torch guy to torch your double hood exit. Because that was an incredible transformation watching that turn blue and other colors. Think it would really really pop on your ride.

[@Gu1tarZer0]

I used to think it was normal to spend 90% of your working time looking for tools, thanks to my dad's excellent ability to misplace things. (how do you lose (not stolen) 2 impacts, a table saw, and a belt sander??) Organization makes working so much less painful! Dang that Ebrake setup is sweet, nice and simple.

[@R.J._Lewis]

I dig the double barrel shotgun look of the wastegate pipes, but I think I would cut them off a little bit closer to the hood and maybe add something subtle like an "aiming point" in the center to make it look even more like a sawed off double barrel shotgun.

[@spyingbigfoot1181]

yay more evo, more-ron

[@petetofani4896]

Looking forward to seeing what it makes on the dyno.

[@younglui9222]

definitely my favorite of the gymkhana grid cars

[@hyper8545]

Evo powah 😤🤙

[@chadmatson4009]

That handbrake is OP dude.

[@shkrosse]

Way to go Ron! Getting stuff done!

[@joshuamiller598]

Awesome setup, I am excited for this, especially with that Handbrake. Them Rims be spicy, Lovn’ it!

[@we-r-one_automotive.daniel3108]

Dude thanks! I've been trying to figure out a breaking system for my truck. I'm transitioning into a wheelchair. So I am needing to add a hand brake with a throttle lever. This is the key 🤘🏼👌🏽🔥🔥

[@danielspencer1973]

Doing it right Roncar, excited for you!

[@ReverendClaydough]

+10,000pts of sentimental value. So rad. KB43ver!! ❤️

[@jeffrey88888]

That was a great explanation on the handbrake!

[@latrinedveen]

lab coat ron moment incoming lol love the EVO dude

[@sushiandpizza]

I like how Jameson is building everyone’s car.

[@Graver81-69]

I need a toolbox like that boxo. I’ve been building ambulances for the same company for almost 22 years and you can’t imagine all the tools and gadgets I need to get a unit built

[@architectjeff]

Nice install! I wonder if rubber grommets would be warranted at the locations where the lines run through the holes in the floor?

[@michaelcrebbin7328]

Nice job Ron the evo is looking sweet

[@andrethevegan_]

Vin will probably win since he's the best driver of this trio

[@CraigBrosRacing]

AS A FINANCIAL BACKER OF THIS SHOW (THOUSANDS SPENT ON MERCH) WE ALL WANT JON CHASE BACK ON THE YARD!!!!ASAP!!!😮

[@FormedAndFunctioned]

What has supy and grimm been up to..?

[@imSchwaggy]

This is what I been wondering. Where are they. And their cars.

[@guitarist1875]

Think they're not full time at Hoonigan? Remember a comment by Hoonigan on one video that they were brought in for the Warthog etc and only come for big builds like these

[@nathangee7075]

Supy’s New York based right? With his family.

[@HooniganProjectGarage]

@@guitarist1875 correct. They have both gone on to work at different places and on different projects.

[@thembanimdlalose5229]

This is such a beautiful build

[@ianlong5208]

I can’t even imagine having tooling like this

[@gavinstrange955]

Favorite part the osha violation😂😂 like Jameson said we poor 😂

[@micahjd865]

I had a 95 DSM, my favorite thing to do after painting the valve covers is to hit the raised letters with a sanding block. Step up the grit to a high polish and make those letters pop!

[@a456987]

"Pretend you know what you're doing" is like the entire philosophy of Hoonigan

[@alexandersillan8139]

Ron, can we have more footage of you riding bmx please... Get hoonigan to build a ramp out the back, you have the space and imagine the extra guests you could get from the extreme sports world. What a great crossover

[@MultiTravellingman]

Could you laser cut 43 or KB onto the double barrel exhaust waste gate tips?

[@hereticalhimbo]

i love the ricer spec wastegate, just need to know if sidepipes are in the furture

[@lifeofdam5141]

i was waiting for this one

[@j.son_01]

Ok. Here we go!

[@thirteen12]

I did an ACD delete in my IX and always wondered how much harder it would be to use the handbrake. Guess I should find out.

[@moimv2729]

Is Lab Coat Ron back again?

[@BraydenLeach-w6i]

Double-barrel hood exit is rowdy street race car style. . Looking forward to seeing what it makes on the dyno..

[@CriticoolHit]

Scotto threatening to throw hands lol.

[@IDlikeanEvo]

Fackin love the build so far man , keep it up !

[@sailorwolfe6127]

I see that handstyle, whatchu write big dawg? Lowkey love how yall east coast boys were writers at one point in time. I always wondered how tf yall got EWOK to pull up, but makes sense now😂 stay up!

[@civic2182]

THAT BOY ANGELO FRIED

[@DerangedCoconut808]

is there a thermo-reactive paint that can handle the heat so when you ripping it the hood exit exhaust can dynamically change color?

[@nathangee7075]

“Sup sweatpants?” There’s your new tshirt right there.

[@Splendrous]

Will the slightly different length in the brake lines result in the brakes actuating at slightly different times? The configuration of the T bracket made it seem like it was intended for a different application. Just curious!

[@HooniganProjectGarage]

It ends up staying the same, the only proportioning right now happens at the master cylinder to send a bit less pressure to the rear wheels vs the fronts. As long as the diameter stays the same, the length doesn't matter as much.

[@dim3920]

Very cool video. Does anybody know what kind of wheels are those on the evo?

[@lyzek01]

Love the build so far. May I suggest a Valve Cover and Cam Sensor Heat Shield from either RK titanium or JDC. I've used that gold tape and the still was too much for my paint on the valve cover. That hand brake system scares me a bit I a leak does occur because potentially you may have 3 brake lines without pressure. Maybe I'm not grasping the concept correctly but please be safe!!!

[@randomshoretrooper3608]

10:00 Subaru is going to file a restraining order on yall 😂❤

[@j0sh707]

I saw a boxo with a drawer full of 10mm a whole months supply!

[@louiscruz3351]

the wasgate pipes are so nice

[@UncleManuel]

I really dig this double-barrel shotgun ....... ehm, wastegate pipes. Well, they are shooting, too - they are shooting flames! 😁😇🤟

[@Djeverything17]

20:09 was that nalla, like nala stomps nala???

[@scum07k]

should plasma cut a little Hoonigan logo and use it to hold the double barrels together as a brace, maybe a wee bit of an angled cut too

[@richardpalmer2957]

You need to do a tack on the end of each for the bead sight on the end of the shotgun barrel.

[@sm42812]

The whiteboard was very helpful.

[@Airsofthelpvancouver1963]

Hey Ron, did you install the 4B11 or the 4G63 I think yours came with the 4G63 but I know the 4B11 was definitely a different animal so I was curious whether or not you upgraded to the 4B11?.

[@dopesquatch]

I wasnt paying attention... does that wilwood proportion automatically or is it located elsewhere

[@mojoson2062]

Bad ass build!!! 🎉🎉🎉

[@borkemo]

Still can't believe Ken is gone