Origins figures, tearing apart a figure - WWE He-Man and the Masters of the Universe

[@kenten]

I've got two Clawfuls coming, the minute I get them, those forearms are coming off to make my dream Clawful: with TWO giant claws! Thanks for the how-to, He-Bro!

[@HeBroTV]

Glad I could help: kzbin.info/www/bejne/bqOWgpVtoqeAq5Y

[@JinzoCrash]

I... I did the SAME exact thing with his Revelations, even buying a realistic lobster replica, giving him funky eyes and fiber optic antenna. Glad I'm not the only one who despises his teeny claw lol.

[@Quintesson05]

*I DID IT!!!* Thanks to your video, I was able to swap Ninjor's legs onto Faker's purple "furry draws" and boots. My custom Evil Warrior "Chopliftor" is halfway complete! (Probably more like ⅓-way as I need to paint his naked Stratos upper body and wings, get him a Webstor body armor and custom head, but heck, I still feel like you've helped me with the most annoying part of the project!) *YEEEEEEEE-HAAAAaaaaa!!!*

[@HeBroTV]

Glad I could help out. Feel free to check out some of my other video with custom figures where I do a lot of part swapping: kzbin.info/www/bejne/rV6Vf52aqJV4Z5I (Green skeletor video)

[@brushstroke3733]

Awesome, I had no idea the figures could be disassembled to this extent. I'm going to have to try mixing and matching parts and making my own customs that way. Keldor and Skeletor might be getting some swaps.

[@HeBroTV]

Glad I could help

[@SergioAL]

But is it possible to dissble the handa, the feet and so?

[@HeBroTV]

Yes, it's shows it in the video.

[@mopkrayz]

for oversized holes just use some bluetack or similar putty for non permanent solution

[@masterfarr8265]

' just got a great idea, 3d printable origins waists that can printed in any color, this way if you want a certain colored loin cloth (this is mainly for like beginners who aren't ready to paint yet) just head up the old waist, take the legs off and put it on the 3d printed waist. What do you think?

[@HeBroTV]

Great idea

[@anthonybernero9720]

Nah. Just paint it.

[@retrorandy77]

Awesome video bro. I wanted to pull some Origins apart for a full paint job but didn't want to go pulling at joints and wreck the figure. This gives some peace of mind 👍

[@Nediablo]

Awesome!! Thanks for this! Now I can really really easily paint Skeletor feet blue! Thanks a lot 👍👍

[@HeBroTV]

Glad I could help!

[@brushstroke3733]

Good call!

[@bronykingamethystrain5676]

You have any suggestions to reattach the legs to the pelvis after they're painted without ruining the paintjob?

[@HeBroTV]

Before putting them back on, paint a thin layer of super glue over the paint. (Let it dry for a day or more before reassembling. ) It's best to sand the parts to create more clearance before you paint them too.

[@jpkreations]

Hey Bro, a have a question... Is it possible to split the torso (upper part and lower part) on Man-e-faces or Roboto? Thanks in advance!

[@HeBroTV]

I was unable to do it on Roboto's, but other said they have. Many, his waist come apart, but not his head.

[@jpkreations]

@@HeBroTV Thanks a lot Bro, I really appreciate the help. The reason I asked you is because I need those futuristic "underwear" for a custom. Now I know that Many is my guy. Thanks again! Keep the great work Bro!

[@Quintesson05]

Can Roboto's legs be removed? (Not his waist, just his legs... I want to pair them with Clamp Champ or Kronis/Trap-Jaw's waist.)

[@domls1317]

Do you know if Robotos Origins head comes off? I want to swap Kanes head on him

[@HeBroTV]

I'll have to try it.

[@domls1317]

@@HeBroTV all right. I wish they would've put Robotos torso on Kane and then put a reddish tint on it. That would've been a great Kane Roboto Mash-up

[@fistofthenorthstar9010]

Can those pieces be cast now ?

[@HeBroTV]

Sorry, I don't do casts

[@jamesjustice4515]

Hey big guy this is sledgemaster. That a great video. We liked it. Cant wait to see ur next show. Good night and god bless every one there

[@HeBroTV]

Thanks! You too!

[@hammerlane714]

Have you tried separating the battle armor elbows?

[@HeBroTV]

Yes: kzbin.info/www/bejne/m6TWe5Z8eJJ_Z6s

[@Quintesson05]

Is there a video showing how to take apart Origins Roboto? I bought an Orange "CVS logo" Roboto in order to pair his orange legs with Kronis or Clamp Champ's "furry draws".

[@HeBroTV]

I haven't made a video specific to Roboto, but the legs should come off the same.

[@Quintesson05]

@@HeBroTV I thought I would ask. Someone once posted lots of Roboto's immovable parts (magenta waist) on eBay. I kept missing out when someone was listing his (red) legs. But since I wanted to paint the upper thighs orange anyway, I'm glad I waited.

[@HeBroTV]

kzbin.infokclmcvD6bZk

[@nickmur8829]

Have you ever tried to pull off the peg on the waist in order to create a hole for an interlocking with classics figures?

[@HeBroTV]

I have not

[@theartisanrogue]

This was SUPER helpful. I've got two torso parts though, the battle armor ones and am wondering if those upper arms can be heated up to be removed.

[@HeBroTV]

kzbin.info/www/bejne/m6uyqHhpqMuUnsU

[@marcogundam2208]

Does it works also with Trap Jaw knee joints? as they look hinged

[@HeBroTV]

I'll have to check

[@randymoses3972]

Great video!

[@HeBroTV]

Thanks!

[@cvapolo]

I tried to do that a few weeks back and let a knee cool off to much so I streched the plastic inside, now it's a little loose.

[@HeBroTV]

Just heat it up and the plastic might return to shape.

[@cvapolo]

@@HeBroTV good advice, I'll try that. 👍

[@monkeyp.i.9944]

Good to know thanks

[@HeBroTV]

Happy to help

[@masterfarr8265]

@@HeBroTV ' just got a great idea, 3d printable origins waists that can printed in any color, this way if you want a certain colored loin cloth (this is mainly for like beginners who aren't ready to paint yet) just head up the old waist, take the legs off and put it on the 3d printed waist. What do you think?

[@HeBroTV]

@@masterfarr8265 I like the idea, I may have to look into that.

[@masterfarr8265]

@@HeBroTV And then you can do different styled ones to make Lazer Power He Man or He Ro.

[@masterfarr8265]

@@HeBroTV so are you gonna do it?

[@YouvegotmailAKAEP1C_GHOST]

Your videos have been great help working g on customs.

[@HeBroTV]

Great to hear!

[@kaleomariz1000]

Have you tried ripping the arms of a battle armor figure? I think battle armor skeletor looks stupid. But I like the heads. I just don’t buy it because it’s an expensive figure. But I would if I could rip away the armor trunk and put it in some other figure that would look better with armor.

[@HeBroTV]

I think the arms may come off, but I don't think the other arms could replace it. Looking at it the arms, are not like the others but more like how the legs fit on to the hip sockets.

[@nono-re7he]

I have an origins stratos whose right arm falls off way to easily. Do you have any methods to fix that? If i leave him displayed it holds. but 2 shakes and the arm falls out. the body socket for the arm holds all other arms fine. but if i put the stratos arm on any other body it has the same loose problem.

[@HeBroTV]

Strange that 2 of them have the same issue. I would return them.

[@galvatronustv5811]

Reconnecting the boot and food part is a pain in my ass, but mostly my fingers

[@HeBroTV]

Yes

[@galvatronustv5811]

I still managed

[@eltenda]

Interesting! I love the intro!

[@HeBroTV]

Thanks!

[@tevanos]

Does this work the same for the female characters?

[@HeBroTV]

Yes

[@allenduarte757]

Informative

[@HeBroTV]

Thanks

[@victorpinchulaf]

I got here looking for how to fix a loose knee, after watching the video and read all the comments, I still don't know what to do😞 Great video though 👌🏻

[@andygarand8122]

Have you ever tried or been able to swap classics style legs onto an upper origins body to give it more of an overall classics look and height?

[@HeBroTV]

Have not tried it yet.

[@justinmohan7103]

What do you do when you want to put it back together after your done painting it. If its boiled again won't the paint come off?

[@HeBroTV]

I use a heat gun when I have painted parts.

[@kaleomariz1000]

Wow 😳!!! You really know how to do this! I wonder if putting in the hot water makes the paint decay or lose the quality of the plastic. My he-man has a factory flaw in that the knee joint of the left leg is longer than the other leg. I probably want to fix this but I am scared it may ruin the quality of the plastic.

[@HeBroTV]

You don't have to use Boiling water just around 205 degs. kzbin.info/www/bejne/aGfFe4uOidx7q7c

[@kaleomariz1000]

@@HeBroTV Too late! 😬. I already did it! I hope I didn’t do permanent damage to the plastic.

[@HeBroTV]

@@kaleomariz1000 It should be fine. 2 ways to tell, did you smell plastic fumes, or see lots of residue in the water after?

[@kaleomariz1000]

@@HeBroTV I did feel the smell of plastic. But no plastic residue in the water. I guess it turned out fine! 😬 hopefully!

[@anthonybernero9720]

You can't feel a smell. You're just being paranoid, kiddo. Don't worry about it.

[@rosemountcarcompany1000]

Hey dude! Hope your well! Need some of your expert advice again so hope you don’t mind! I had to put one of my figures legs in hot water to loosen up the joint. But after leaving it in for a few minutes, it seems to have made the knee joint now too loose! Argh! I tried reheating it, and then pinching the knee joint closed as I cooled it under the cold water but that’s actually made it even more loose! Contemplating just replacing the whole figure but thought I would check with you first if you had any expert tips on stiffening his knee back up a litter first? Hope so!! Lol thanks as anyways!! Your help is always so much appreciated!!

[@HeBroTV]

Put in a cup of really hot water, leave it there for about an hour and let it cool on it's own in the water.

[@rosemountcarcompany1000]

@@HeBroTV hey!! Thanks for coming back to me as always! You really are a saviour to the MOTU community! 🙏🏼🌟 so do you suggest boiling water from the kettle or just really hot water from the tap? And will this work 100% do you reckon? Thanks as always dude!!

[@HeBroTV]

@@rosemountcarcompany1000 Here's what I use: kzbin.info/www/bejne/f4aofmyKbNKhg7s

[@HeBroTV]

@@rosemountcarcompany1000 I also did a temperature test: kzbin.info/www/bejne/aGfFe4uOidx7q7c

[@rosemountcarcompany1000]

@@HeBroTV thanks so much for this info! Super helpful! So by leaving it in the boiling water to cool naturally, how would that stiffen the joint? I’m just very inquisitive and love understanding the science behind the techniques! 😀

[@TopshelfStopMotion]

Absolutely epic detailed review my friend, your channel is filled with great content and appreciate you taking the time to share so much info!🤘🤓Got our sub🎥 -Nick

[@HeBroTV]

Thank you

[@JMan1380]

Interesting. Does the hot water discolor the plastic at all? That would be my main concern beyond breaking the thing.

[@HeBroTV]

No, the temp you want to use is under 205 deg f. kzbin.info/www/bejne/aGfFe4uOidx7q7c

[@ILikeyVideo]

Did you fart at 5:47

[@HeBroTV]

More than likely. If I was in the Masters of the Universe I would be Stinkor.

[@ILikeyVideo]

@@HeBroTV lol