Orthographic Projection_Problem 4

[@sravanmudiraj677]

no words for ur help for students.....you just awesome sir.....

[@PraveenKumar-qr8wx]

Civil Engineers be like, first vp, hp, bla bla, Electrical Engineers be like 2 floppy disks and a triangle

[@jareerjs5520]

Hello sir Thanks for all your videos.. But i have a doubt regarding this video.. in front view,at first you are not drawing that small triangle,but later you have drawn using the top view..why do you did so... all the dimensions are given..we can directly take 12 cm on the inclined side on front view...Plz reply...

[@tgvishnu3712]

This channel is very helpful in exams

[@ManasPatnaikofficial]

Hi Vishnu.... Keep learning and do let your friends know about this channel so that they can also benefit... All the best

[@tgvishnu3712]

Manas Patnaik thanks

[@adityabarve2373]

sir i thnk top view is wrong ..bcz tht cutting portion will be on top not on bottom.

[@deepakshah4037]

Sir I think in side view when u cut a side of 12 units inside...the right line of this should be black not blued...sir it's my doubt explain just I'm wrong or right?

[@nag7432]

u are a life saver man!

[@ManasPatnaikofficial]

Thanks Naga for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@yashdesai1977]

Sir particularly this problem wrong because top view is doute please let me know.if wrong or write. Plz replied fast because exam is soon

[@venkatasatyak2090]

is this 1st angle projection and 2nd angle projection.....?

[@nehatiwari2730]

Sir can u tell your initial setting by which u can make u diagram so fast and accurate.

[@nehatiwari2730]

Or the setting we should have while make diagram on AutoCAD so that we finish on time.

[@ahamatibrahimhassan3265]

Sir i have a doubt, about previous exercises this different for first angle of projection because you made side view right than top and front view but why?

[@mylifeoutofourworld2451]

In question 4 how can we draw it in first' and third angle projection....??? The solution which is shown it is first or third angle projection....??

[@shubhampreetsingh8630]

It's in 1st angle of projection. The only difference between 1st and 3rd angle of projection is in 1st angle, we draw side view corresponding to front view(above xy line), in 3rd angle we draw side view below xy line corresponding to top view..

[@sairampolisetty2059]

Sir you saved my life 😁😁😁😀😍

[@gowthamyadav1516]

sir I want isometric projections front top slide views clearly please

[@jatingupta7079]

Thank you Sir, my marks increased from 1/10 to 7.5/10 just by watching your videos

[@entertainmentonyoutube3309]

Sir ,Can you explain Auto CAD-2007

[@francklynatienza5716]

Thank you..I learned a lot..

[@shinesharon236]

Thank you so much for such a great explanation sir!!

[@Mahi-tc2ug]

Sir!!! U have left a small part in left side view..... isn't it?

[@indranilbhowmick7184]

Sir please explain the Figure 20.64 which is in the book of ND BHATT and the page no is 532

[@mahendrachauhan1444]

sir ur videos are very helpful for me, keep making n uploading videos.👍👍👍

[@ManasPatnaikofficial]

Hi MAhendra......... I am sure my videos are helping you learn..... Keep watching and do share this with your friends also... All the best......

[@amrit8445]

Sir please make a video on types of lines, types of pencils,dimension in figures, instrument used ,and lettering...(theory part)

[@ManasPatnaikofficial]

You see a video on that Amrit very soon...... Till then enjoy stuff from all these playlists..... Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@rupalimadke1096]

I think the top View should be opposite manner as u r indicated it Sir plzz explain it once again

[@ManasPatnaikofficial]

Please watch the video once again rupali...... It's crystal clear. All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@shashikiran1844]

Nyc presentation sir..

[@aldairzettewachenje9353]

Thank you sir,I had to pause and load to understand everything

[@ManasPatnaikofficial]

1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@DubsmashAdda]

sir..if the question is given..that..draw both side views..how to draw it sir..pls given me rply..

[@kasimanepalli8884]

Sir we have to draw separate fv and top view and side view or to draw in together

[@akshtutorials]

Really u help alot thnku so much for all problems BT I HV a request to make solutions in Hindi

[@mukeshajb]

thanks you for my exam preparation it is helpful

[@mansoorpashamansoor761]

music

[@lokeshdongre2564]

Please can somebody explain me why sir has made side view as front view?

[@dhirajmazumdar4712]

because in this case our front view that is in the direction of X is along the side view

[@amitdhatterwal8361]

All are Helpful videos sir... Thanks a lot

[@ManasPatnaikofficial]

Thanks Amit for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@snehaMaheshChodankar]

Sir what about section lines ?

[@ManasPatnaikofficial]

Sneha, there wont be any section lines because we havent been asked to do section.

[@snehaMaheshChodankar]

Ohk Thanks sir

[@krishnamanda7937]

Sir I have a small doubt, in orthographic projection the left side view is drawn on the right side the front view sir

[@krishnamanda7937]

In right side view is drawn on left side the front view sir . Is this correct or not?

[@ManasPatnaikofficial]

Yes you are absolutely right Krishna. In first angle projection, the LHSV is made to the right of FV. And the RHSV is made to the left of FV. But in Third angle projection, the LHSV is made to the left of FV. And the RHSV is made to the right of FV. Do watch my video on Concept of Orthographic Projection for more indepth explanation.

[@wssdobardiya6892]

Quite helpful lectures Sir....

[@ManasPatnaikofficial]

+wssdo bardiya Hi Wssdo Bardiya... Thanks for appreciating my work.... All the best and do let your friends know about this channel so that they can also benefit...

[@kinfeneda1959]

thank sir it is much helpful!

[@ManasPatnaikofficial]

+Kinfe Neda Thanks for appreciating the content.... And do let your friends know about this channel so that they can also benefit.... All the best and Cheers.....

[@p.v.ramana3269]

sir, you tell commands and explain clearly to catch the autocad

[@charansrisaichodapaneedi8595]

Sooperr great teachingg

[@CareerHirings]

Very good explaination😁

[@ManasPatnaikofficial]

1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@galamsuchi7912]

Presptive projections problems some explain videos

[@utkarshshinde3128]

Is diagram ka isometric view ka video banaaiye

[@drashtishah8557]

ohmygod THANK YOU SIR

[@KarthiKeyan-dx3mv]

Sir your video is awesome so me autocrat top view ,front view and side view 1

[@adarshtiwari-hn5xt]

I have problems in front view of that 16mm height box

[@ManasPatnaikofficial]

watch the video again adarsh.....i am sure u can crack it..........

[@ceelamanvesh690]

Sir top view getting confuse

[@nidhiverma9612]

Ap isko autocad 3D isometric view me bataye plzz

[@venkatadurgaraomalisetty8741]

Thank you sir

[@nichallnichall1964]

Tq bro

[@kipkorirdennis2632]

Clearly explained

[@the_true_hier_to_the_sharingan]

Awesome.... sir!

[@ManasPatnaikofficial]

+JAY TAILOR Thanks for appreciating the content Jay.. And do let your friends know about this channel so that they can also benefit.....

[@searchcivil9968]

Please sir a lot of student said to make video in hindi

[@aungkyawkyaw4373]

Thank you

[@ManasPatnaikofficial]

Thanks for appreciating the content Aung Kyaw Kyaw Do watch all the videos on drawing and mechanics...... And also let your your friends know about this Channel so that they can also benefit.......

[@Surajkumar-bz4ip]

Isme aap dimensioning ni kiye sir

[@ManasPatnaikofficial]

+Suraj kumar Mai shayad bhilool gaya

[@nikhleshsoni5941]

sir can u share link of your fb profile.I am having one doubt.

[@ravipathak9334]

Nice sir ..

[@veeraiahmaguluri8679]

Thnq so much sir

[@paulmorrey733]

Thanks

[@Omkar007-s2o]

need solve sir thank u very much

[@jatinlodhi980]

Bhut bhut shukriya

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@Surajkumar-bz4ip]

Thankyou sir

[@ogurisrinivas2858]

Thankq sir

[@gollapallidhilliswararao6843]

Tq sir

[@ManasPatnaikofficial]

Hi Gollapalli........First of all....Thanks for appreciating my work.... I always focus on giving you guys excellent quality free education.... All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....

[@kassim3101]

very good contents but a lot of ads which makes it hard for the mind to focus after the ads have being shown just for one video about 11 ads show 💔💔💔💔💔💔💔

[@ManasPatnaikofficial]

You are right...It has been reduced now.... If you come across some other video having a lot of adds...then do let me know in the comment section.

[@sathavahana5587]

thank u sir

[@nikitayadav6106]

Learning a lot is not enough i want to know the whole of it which i suppose isn't happening bcuz u r not delivering it fully....😟 Still thankz

[@searchcivil9968]

Hindi me video banaye

[@ManasPatnaikofficial]

Bohot pehle se bane hue hai.... Niche uska link hai.... Aapne friends k sath bhi share karna. All the best. Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@speeds1818]

[@mukeshajb]

thanks you for my exam preparation it is helpful

[@pallapaguroopapallapaguroo6584]

Nice

[@ashishrajput8082]

Thank you sir

[@althafta2329]

Thank you

[@hariharanm2906]

thank you sir