Thank you all for the love ❤🎉 i am very happy that you guys love this video! Don’t forget to subscribe to support my channel. I really appreciate you 🙏🏻🙏🏻🙏🏻❤️🔥❤️🔥 design by cinderwing3d
@Nevex9828 ай бұрын
Yo every time I print the printer just goes to the corner and it just does nothing but just spew out PLA
7 ай бұрын
Which 3d Printer did you use for this Dragon?
@agusmorelli84657 ай бұрын
Hello i want you to make a toy that only exist in wander over yonder (the H.A.T.E.R.V) Please please please please please 😊😊😊😊😊😊😊😊
@everettmartina89714 ай бұрын
😊
@EricCarroll-ys5jw4 ай бұрын
How do I need to get in contact with that will do 3D printing a 2 square blocks
@Overcoast722 жыл бұрын
That’s what my bones sound like when i stretch in the morning.
@djkv91132 жыл бұрын
Who cars
@Genysis_overdrive2 жыл бұрын
It dont happen to me"
@malaysiaball40842 жыл бұрын
@@Genysis_overdrive boneless
@Genysis_overdrive2 жыл бұрын
@@malaysiaball4084 i'm not boneless i just have a strong bone🥛😎
@malaysiaball40842 жыл бұрын
@@Genysis_overdrive men i wish i was NOT boneless
@emilyfogerty64382 жыл бұрын
What the heck filament is that!? So cool!
@OchdDottMp3 Жыл бұрын
Looks like maybe tri extrusion filament with different colours throughout, correct me if I’m wrong tho
@Pukanjan Жыл бұрын
@@OchdDottMp3 It's a rainbow filament i think
@nicolefoyt5115 Жыл бұрын
@@Pukanjanyou are correct about the rainbow filament but it’s called pla silk rainbow
@Pukanjan Жыл бұрын
@@nicolefoyt5115 I mean can't they just call it rainbow filament?
@maple_gamer4011 Жыл бұрын
@@Pukanjansorry for the nerdy stuff, but no its PLA or polylactic acid which they need to know for gases etc. And The sil part of silk shreds through nozzles, atleast i think so🤓
@KODER-ou2rx Жыл бұрын
I can't even imagine the effort that was put in the 3D modeling phase😯.
@SlashX_482 жыл бұрын
ASMR crack noises 🎧🎵 That dragon is so cool
@fizzay57412 жыл бұрын
Can you send the file?
@johanaangarita15942 жыл бұрын
Megusto
@PagalMPx2 жыл бұрын
@@fizzay5741 8u8
@3DPDoctor2 жыл бұрын
Thank youuu
@reynaulmorales90092 жыл бұрын
@@fizzay5741 jajajañ
@Ender_Bonnie2 жыл бұрын
My thought process the entire time you were taking it off the board: *don't break. don't break. don't break.*
@nomnom75792 жыл бұрын
I agree
@somedudewatchingyoutube91632 жыл бұрын
F*ck, it broke Guess I wasted 16 hours
@nicolasmaldonado78782 жыл бұрын
Same
@eggsheeran49742 жыл бұрын
same
@MayaBee-is2uv2 жыл бұрын
Omg SAMEE
@naturestastegrenade71902 жыл бұрын
Imagine your kids leaving that on the floor and then stepping on it in the middle of the night💀
@jameskeller3425 Жыл бұрын
still wont hurt as bad as a Lago piece
@WATCHING-247 Жыл бұрын
You shouldn't write things like that online you just set off my PTSD of legos 😂😂😂😂
@LickeyTongue Жыл бұрын
Already been done and it hurts 🤣
@Thunderbyrd. Жыл бұрын
You would lose your leg all the way up to your hip! Did you see the spikes on that thing?
@szymusiek22 Жыл бұрын
4 year old twins don't like this one because it "bites" (yup booth managed to step on it)
@vikkicain56742 жыл бұрын
That's some nice colors
@3DPDoctor2 жыл бұрын
Thank you
@annamorin50825 ай бұрын
What are those colors called do u sale
@SFVMTV2 жыл бұрын
That is the best thing ive ever seen coming off the printmat
@3DPDoctor2 жыл бұрын
Thanks
@Alucard07152 жыл бұрын
@@3DPDoctor is that just 100% size? And if so, what infill % and what filament?
@hektorp7287 Жыл бұрын
That’s really cool and satisfying at the same time
@3DPDoctor Жыл бұрын
Thanks
@hektorp7287 Жыл бұрын
Your welcome man
@Avelyn-17g2 жыл бұрын
Me the whole time “don’t break don’t break don’t break.”
@CatSynthwave2 жыл бұрын
Same xD
@hakeemjohnson5052 жыл бұрын
Ikr XD
@snigdhasingh56822 жыл бұрын
The black sheet right 🤣
@anonmiswolf81932 жыл бұрын
that sheet is desined to bend to get the 3d prented object
@drinkswatere2 жыл бұрын
@@snigdhasingh5682 no the dragon…
@thecleanslateshow45932 жыл бұрын
We did 3-D printing in one of the clubs I did in highschool. They wouldn’t let me print the master sword but they let me print gengar ^^
@asyoucanclearlyseeiamPerson2 жыл бұрын
Bro f for respect my dude I was literally in the exact same situation. It was the gifted class, and they had two 3-D printers, but they couldn't print really big things so the master sword was a no go. But what they did let us print was what looked like a weird version of a lego brick but the studs were really tall and had a hole through to the bottom.
Little tip for you, bend both ways. The print releases because the surface underneath stretches and it releases when it pinches too. Try it, it will be a world if difference
@bobbybobberson478325 күн бұрын
Thanks
@agent1gamez2 жыл бұрын
Just imagine the dragon breaking while removing it from the plate
@Dragon-Slay3r2 жыл бұрын
Lol
@t3a2r Жыл бұрын
An arm came off of one I made. I had printed one out perfectly then dropped it. Broke in three pieces. So I did it again and the arm came off while removing it. 🤦🏾♀️ They are more fragile than I thought.
@agent1gamez Жыл бұрын
@@t3a2r bro that's sad ngl
@LoonaMoon1262 жыл бұрын
Beautiful🥺✨
@3DPDoctor2 жыл бұрын
Thank you
@nickcanonАй бұрын
If Kevin McCallister had a 3D printer, Home alone would have been rated R
@medishiki2 жыл бұрын
The sound is so relaxing! The dragon is amazing 🔥
@BigRheno2 жыл бұрын
That sound will never be relaxing. Not now, and not a thousand years in the future.
@joob5252 жыл бұрын
That is literally the coolest 3d print I've ever seen, how long did it take to print?
@manuelcarrera3062 жыл бұрын
Like 5 year for those details
@a_alex_l20412 жыл бұрын
Well I think a day or two.
@Adrninistrator2 жыл бұрын
2 hours and 50 minutes
@rahuilali68542 жыл бұрын
Nnnnoooo
@colinmanlives2 жыл бұрын
When I sliced a dragon like that is prusa it said 18 hours 37 minutes
@360Fov4 ай бұрын
That is so damned sturdy what the heck....and all those articulated joints....3d printing has evolved so rapidly....it still feels like a future thing to me but really its totally mainstream and current.
@DevjKaiser2 жыл бұрын
I want to make one now lol
@3DPDoctor2 жыл бұрын
You should
@X4T1C4L2 жыл бұрын
I also want to make one but I don't own a 3d printer
eu quero que você muda essa tela de D para uma tela de tipo de pipa Play grande Tá legal Eita esqueci de falar oi oi como você viu aí em cima eu já falei tudo mas eu espero que uma pessoa não brigue com você tá que tem outra tela de graude Então mude um pouquinho essa tela tá eu não tô fazendo nada de mal com você só estou falando para você mudar a tela senão você não vai ter seguidores e eu vou olhar o seu canal tá
@wzdee18142 жыл бұрын
Bro that crunch was so good my phone lagged
@3DPDoctor2 жыл бұрын
Hahhahah
@carlosadrianramoslugo80542 жыл бұрын
The sound Is so satisfying, and the dragon looks amazing 👍💯👌
@3DPDoctor2 жыл бұрын
Thank youuu
@draskopopovic95432 жыл бұрын
Your profile pick fits your comment
@hassanlamar372 жыл бұрын
This is the best 3d print i have ever seen
@KihanaKat2 жыл бұрын
It’s so cute! Gosh darn it I wish I had a 3D printer so I could make a billion of these and stick them all over my room.
@HollowMoon52 жыл бұрын
I feel the same!
@emptyasmrman2 жыл бұрын
Buy one then, the starter printer is only 180 then you just buy the filament and download the blueprints
@mekeditt2 жыл бұрын
@@emptyasmrman I n my country starter printers 3500 :(
@ghidorah.stan209 Жыл бұрын
I once went to a reptile show and they had an entire stand of 3d printed stuff like dragons, dinosaurs, lizards, etc. I got this exact dragon lol
@Pancaketimbah2 жыл бұрын
That looks so cool I wish I had it!!!!
@lalalu78662 жыл бұрын
Now this is what I call a perfect piece
@3DPDoctor2 жыл бұрын
Thank youuu
@3DPDoctor2 жыл бұрын
Don't forget to subscribe to my channel! Here is new cracking dragon video: kzbin.infoJb8UP6K8o9E Here is new rose dragon: kzbin.infoNPyO-KnXwhs?feature=share Here is new galaxy black crystal dragon: kzbin.infoyhNgBXXztlg Here is Shenron from DBZ: kzbin.info1QncJ_BlJp8 For the most common question you guys asked: 'Unfortunately it is not for sale'. I saw lots of people selling this model on etsy and over other platforms. Go check them out!
@botsha46612 жыл бұрын
kzbin.info/www/bejne/g4DGnmyZeMRloJo No offense here’s what I saw I’m sorry for explaining like that 🤍
@игорьзеленский-р2п2 жыл бұрын
🤙👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@MrGhosT29.2 жыл бұрын
Thats a prusa 3?
@jknights31682 жыл бұрын
What kind of 3D printer did you use for your dragons? I always wanted to do 3d printing and your 3d dragons have inspired me to try it out
@hobbes281 Жыл бұрын
You need to pin your comment. Thanks for the info. Will definitely check out those vids & your channel.
@Levi_Or_Lizah_xX2 жыл бұрын
I like the asmr and the COLOURFUL DESIGN of the dragon.
@marcellajoseph57402 жыл бұрын
Wow, that's really cool. It looks amazing.
@Esomres2 жыл бұрын
I need like 5 of these
@3DPDoctor2 жыл бұрын
Hahah why not lol
@OhhhMygodd10732 жыл бұрын
Collection?
@Z.E.A.L84762 жыл бұрын
3d printing doctor pls give me the dragon
@OhhhMygodd10732 жыл бұрын
He cant sorry he dont know where your house is
@PagalMPx2 жыл бұрын
@@OhhhMygodd1073 babiesuyu
@ballistic_fortniteyt32722 жыл бұрын
This is the coolest thing i have ever seen
@robertthecollector22292 жыл бұрын
Woaw that dragon 🐉 is cool 🤯🥳🔥🤘🔥
@editsthearms81272 жыл бұрын
So ASMR crack noise That dragon is cool the colour
@evejobs78012 ай бұрын
This was satisfying and I wish I had one
@Rainbowpotty Жыл бұрын
Doctor: bismuth dragon isn't real, it can't hurt you Bismuth dragon:
@hipperbeast74702 жыл бұрын
I been watching this types of videos and this one my favorite that dragon is a master piece😮💨
@3DPDoctor2 жыл бұрын
Thank you
@katycorns7856 Жыл бұрын
it still amazes me what 3d printers can do.
@samuelsalgado37802 жыл бұрын
wow that is so cool 👍 I really like it so much the dragon 👍👍
@3DPDoctor2 жыл бұрын
Thanks
@SkullzV32 жыл бұрын
The sound tho 🤩
@AddisonWoodward-pp5lj3 ай бұрын
I had a hard attack when you began to pull it off I was like DON’T BREAK IT!
@facundomedina9902 жыл бұрын
I need one is so beautiful 😯
@Phoenix2.5D Жыл бұрын
I saw these being sold a little while ago at Phoenix! Brilliant designs. Wish I had brought my wallet.
@MotoCruiseTamil2 жыл бұрын
That crunching sound😮
@bartalamao61922 жыл бұрын
Ok that is awesome I love the sound to
@FloorYOUTUBE Жыл бұрын
You should have shown us the printing process also heres a scary story Chapter I: Mysterious Rumour In my neighborhood theres a popular rumour that started in 1980's to 1990's there was a happy couple known as Mr Crawler and Mrs Crawler. Mrs Crawler was a violinist while Mr Crawler was a lumberjack. Both of them lived on a Mansion and were happily married but it wouldnt be happy for long because both of them would always argue. So one day when they were argueing Mrs Crawler got so angry that she grabbed a baseball bat and hit Mr Crawler on the head and accidently killing him. Mrs Crawler realized what she had done so she went to the forest and buried her dead husband's corpse but she didnt know someone was watching her and had called the police. Two officers arrived on the mansion and they heard the violin playing on the basement so they decided to walk towards the basement but that was the worst mistake of their lives. The two officers and Mrs Crawler were never seen again and nobody knows what happened to them. Now whats really mysterious is that after that event multiple children started dissappearing and people have claimed to hear the violin when they are walking pass the mansion. Anyways back to the main story. Chapter II: Candy Scam This story happened recently on halloween of 2022. Me and my friends Matthew, Malek and Freya were out trick or treating for a couple hours until it was getting late. Matthew and Malek went home but me and Freya wanted to get more candy. We went to other houses but most of them had no candy so we were about to give up until Freya said "Let's go to the mansion over there.". I replied "Isn't that mansion haunted?" she replied back with "Thats just a stupid rumour.". So I followed her and I saw a bowl of candy outside the doorstep I thought it was one of those houses were you could take as much candy as you liked but there was no candy it was just empty candy wrappers. Chapter III: Inside The Mansion We were about to leave dissappointed until I heard the door open so I turned around and a man which looked about 40 to 50 told us "Wait! are you trick or treaters?", we said "yes" so the man told us to come inside and choose what candy we liked. Both of us made a dumb decision of coming inside; the house looked very dusty, the walls looked damaged and the floor looked like it didn't get cleaned for the past hundred years. The man told us "Sit down on the sofa I will get your candy upstairs.". Chapter IV: The Horrible Smell While waiting Freya asked me "Do you smell that?" I replied "Yeah I do, it smells like rotten eggs.". Both of us went to check where this horrible smell was coming from and it led to the basement door. Freya opened it and we saw a woman's body hanging on the wall with a massive hole on her stomach that revealed her intestines. We ran out of the mansion but the man saw us and started to chase us while holding an axe. Chapter V: The Man's Fall While I was running I yelled "SOMEONE HELP SOME GUY IS CHASING WITH AN AXE!" I heard the man say "Shut up will ya?" then I heard a loud thud. I turned around and im guessing the man tried to throw the axe at me because it almost hit my foot. Freya grabbed the axe and told him to back off but the man didn't listen instead he took out a pocket knife and started to run towards her. Freya managed to cut off the man's leg making him fall and drop his knife so I took this opportunity to call the police. Chapter VI: False Rumour Luckily the police arrived quickly and arrested the man. Turns out the rumour wasnt true because the man was Mr Crawler himself and he was a cannibal who killed and ate the two police officers along with his wife and unborn baby. Mr Crawler was also responsible for killing and eating multiple children. Whats even worst is that theres a total of 21 missing children but only 3 children were found in that mansion and none of them were alive.
@thewolvessquad4045 Жыл бұрын
Dam
@thewolvessquad4045 Жыл бұрын
That should be a book
@nikkitolliver892311 ай бұрын
Why does the 2nd chapter have my dogs name in it (freya)
@Iminurhouse_111 ай бұрын
Omg its so much like asmr i love it❤
@isabellarobinson6082 Жыл бұрын
Family member got me a small version of this for my 16th birthday, one of the best birthday presents I've ever gotten!
@nergal_172 жыл бұрын
This is satisfatory
@demonking77232 жыл бұрын
There are wants and needs and this beautiful creation is BOTH I WANT AN NEEED THIS IT LOOKS AMAZING!!!!
@jhumdas46912 жыл бұрын
The Chinese dragon is so beautiful
@curedanxiety16792 жыл бұрын
That's not a Chinese dragon, it's a serpent.
@enyhegonzalez75352 жыл бұрын
Donde lo puedo comprar
@Enzodgwolf_6662 жыл бұрын
It's beautiful dragon 🐉😍😍😍❤️
@3DPDoctor2 жыл бұрын
😍😍
@Enzodgwolf_6662 жыл бұрын
😁👍
@Ashley_C_2134 ай бұрын
Wow, so beautiful!!
@aaronbuzzard57682 жыл бұрын
i struggled making a little stand for my phone, i couldn’t imagine😂
@nob97052 жыл бұрын
Bru all u need is a book lmao
@joda46802 жыл бұрын
He probably has a phone holder on their chest
@TRASHGHOST6662 жыл бұрын
Watched this last week and i had to watch it again jus so satisfaying XD
@3DPDoctor2 жыл бұрын
Niceeee
@AirCactus_8 ай бұрын
You probably don’t need a brim with that adhesion 😂
@banu82152 жыл бұрын
That dragón is beautifu :O
@CelesteaLovesMC2 жыл бұрын
The colors are so bootiful🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩
@shashankdoharey2752 жыл бұрын
This is so amazing... I wish I had a white dragon like this which I could have used as a shoulder muffler or a crown while taking weird selfies... 😂😂😂😂
@nunyabidness60452 жыл бұрын
Oooo I love the ASMR like sounds! And I need that dragon in my life, just to clink it around for the sound. 😆
@proviser_d1295 Жыл бұрын
LOOKS AND SOUNDS SICK!!!❤
@Yehal_Mij2 жыл бұрын
Super cool, what filament did you use?
@eduardoigor91542 жыл бұрын
Perfect!
@vanesa-ky7dx2 жыл бұрын
Nomeregalas soy yovi
@Turtle-sq3ct Жыл бұрын
YALL DONT KNOW THAT SOUND!!! That is the sound of me dying from my friends but also THE BIGGG ASMRRRRRRRRRRRR
@arpitmishra99462 жыл бұрын
Very dangerous dragon 🐲🐉
@jayaswati15052 жыл бұрын
Ohh wow 😲. I love these.
@ShaquiquiHouse Жыл бұрын
Dude that is so freaking coooooool
@alpaca37062 жыл бұрын
The noise is some nice asmr
@PrinnyLover2 жыл бұрын
For some reason as soon as I looked at it the only thing I thought was..."that could be a side hustle".
@XcerberusX8138 ай бұрын
I got one of those yesterday there AWESOME
@SaltwaterTaffyz2 жыл бұрын
I have a question, have you ever accidentally broken one of them when trying to take it off the printing mat thing- I’m not going to make fun of you for it, I mean we all make mistakes, I’m just curious
@3DPDoctor2 жыл бұрын
I did one came off missing a part between chains. I didn’t broke any. I fixed it using a 3d pen 🤭😃
@MgJzChannel.07112 жыл бұрын
Cool
@SaltwaterTaffyz2 жыл бұрын
Oh
@mazuinhamzah88822 жыл бұрын
AKU NAK JUGAK
@yomamawanmadikku90942 жыл бұрын
@@3DPDoctor you got that gorilla dexterity fam slaming that dragon around when you took it off lol
@Amaro_ai2 жыл бұрын
NECESITO UNO DE ESOS!!! AMO AMO AMO AMO 🥰🥰🥰🥰🥰🥰
@EAGLEHORDER7 ай бұрын
OMG DUDE!!! BEND THE PLATE BOTH WAYS!!! YOU'RE KILLING ME WITH THE ONE WAY BENDING LOL
@barythedragoniclord20562 жыл бұрын
amazing
@Pepinoforever2 жыл бұрын
Nice its incredibol
@Aisyah-xx1jd6 ай бұрын
Bro that look sick!
@AM-ey6id2 жыл бұрын
Simplesmente lindo, faz um desses para mim ❤
@wesleyff86132 жыл бұрын
Olha um Dragão de carnaval
@tyrezz18832 жыл бұрын
Wooooow
@ionic7777 Жыл бұрын
It looks like it’s made of bismuth crystals, that’s pretty cool!
@jerrelscott4182 жыл бұрын
Mad rough with it 😂😂
@larissadamata7142 жыл бұрын
Linda ! 💓
@Dragon-Slay3r2 жыл бұрын
Nice
@bean8055 Жыл бұрын
this is the incarnation of legos. Legend says one step will annihilate your feet.
@sekharmadiwal37082 жыл бұрын
Good
@3DAIGOATАй бұрын
😂
@geralddijkman58722 жыл бұрын
Thats nice men
@juciene4322 жыл бұрын
mulher deixa eu te falar uma coisa mude essa tela de G eu desafio você para você mudar essa tela de G para a tela de G do alfabeto agora do jeito
@juciene4322 жыл бұрын
mulher deixa eu te falar uma coisa mude essa tela de G eu desafio você para você mudar essa tela de G para a tela de G do alfabeto agora do jeito
@neiacormae9550 Жыл бұрын
the perfect sound akin to spinal vertebrae 😌
@MADEIN3DPRINTING2 жыл бұрын
❤️
@silvanasantos63882 жыл бұрын
💜
@my-youtube-channel-q111 ай бұрын
Omg ! His confidence
@AnimalsandInfotainmentTube2 жыл бұрын
😍❤️❤️❤️
@SlavaStV2 жыл бұрын
❤️❤️❤️
@Qaita10 ай бұрын
Omg I have a smaller one of the same color. I love mine. Now I need that big one
@myang_cat_08162 жыл бұрын
와우...ㄷㄷㄷㄷㄷ
@lukky6648 Жыл бұрын
This is what opening up a toy felt like as a kid
@josemanuellepe3492 Жыл бұрын
The first time I see a good print in the snapmaker!
@TKY-티케이와22 жыл бұрын
Wow! This dragon is so cute!(?)
@FOGUIN_WSX2 жыл бұрын
man this is too perfect 🤩🤩
@sniffermovies11222 жыл бұрын
Can anyone agree on this hearing the crunch of him pulling his dragon out is so satisfying