Awesome 3D Printed Toys

You can find best and awesome 3d printed toys in this video. I have printed and assembled toys for you.You can find satisfying timelapse scenes.
00:00 Intro
00:25 Cute Flexi Crocodile
01:29 Ender-3 V3 KE Unboxing
02:07 Dutch Cow
02:56 The Ultimate Propeller Launcher w/ 64x Gearbox
05:16 Carrot Garden Layered Fidget Toy
06:59 Flying Night Dragon
08:19 Huge (Curled up) Friendly Articulated Slug
09:15 Disc Shooter
11:41 Clicky Foldable Karambit Utility Knife
14:03 Flexi Bacteriophage T4
15:18 Fidget Clicking Wheel
16:10 Joy Fidget
16:52 DUMMY 13 Printable Jointed Figure
3D Printers:
www.creality.com/products/cre...
www.creality.com/products/cre...
STL Files:
Timelapse Rig:
www.printables.com/model/5701...
Cute Flexi Crocodile:
cults3d.com/en/3d-model/art/c...
Dutch Cow:
www.printables.com/model/7745...
The Ultimate Propeller Launcher w/ 64x Gearbox:
www.printables.com/model/7058...
Toroidal Propeller for The Ultimate Propeller Launcher:
www.printables.com/model/7847...
Carrot Garden Layered Fidget Toy:
www.printables.com/model/7943...
Flying Night Dragon:
www.printables.com/model/4044...
Huge (Curled up) Friendly Articulated:
www.printables.com/model/8472...
Disc Shooter:
www.printables.com/model/7684...
Clicky Foldable Karambit Utility Knife:
www.printables.com/model/6430...
Flexi Bacteriophage T4:
www.printables.com/model/7748...
Fidget Clicking Wheel:
www.printables.com/model/2316...,
Joy Fidget:
www.printables.com/model/2769...
DUMMY 13 Printable Jointed Figure:
www.printables.com/model/5931...
Dummy 13 Double Katana Holster:
www.printables.com/model/6423...

[@mireplica3d]

Thanks for sharing my Bacteriophage T4 model!

[@Gael-em7po]

I love the crocodile❤❤😂

[@JesusIsForeverAlive]

I love how they consider a knife a toy

[@Phranexx]

was my exact thought

[@mylacanzpoopyheadsummerhea1908]

Knife's are dangerous! Idk why they included that. 😅

[@jacknickel7765]

@@mylacanzpoopyheadsummerhea1908 That’s not your problem

[@Parker-gf3ht]

Yummy, knife

[@lincolnallen8670]

these are so cool!!!

[@atwater_209]

Just purchased two ender 3 v3 se, they work awesome

[@GeorgiaValdes]

My favorite one is the dragon🐲

[@MrDismountYT]

The dummy 13 is the best for me

[@nurulainshohor7282]

So amazing

[@UNITHALEHWALISLAMHospitalDuche]

LOOK , SO , COOL ,

[@CowbellOne67]

i like the robo13

[@user-rl2ro2mu7n]

My fav is knive

[@f16khaled31]

7:17 how did you print 2 colors

[@TritonPrint3D]

In slicing programs, there are often extra modules available. For instance, in Cura, in the extensions post-processing section, you can modify the G-code and change the filament at any desired layer in the filament change section. This way, you can transition to another color. If you search for "filament change" on KZbin, you'll find plenty of great videos! :)

[@diyfireking]

Really cool 🧡🧡

[@user-rp8xx9yw9q]

Can you give me the 3D printing file of the dummy?

[@stephenwlodarczyk175]

Amazing. What temperature do you have your bed and your filament set to. ????

[@wyattdray3928]

I would also like to know this, I have mine set to 210c first layer, 205c other. and 70c bed heat

[@spyro9979]

im beginner, how di you print Flexi Bacteriophage T4 with different colors in the same print?

[@Me2Yellow]

Multicolored 3d printers, multi colored filament, or swapping the colors out mid print

[@Ducks308]

How to get one???

[@yuniekapuspitasari8273]

i want the dummy but im in malaysia my home number is 37 house colour yellow

[@nurulainshohor7282]

What is that

[@user-db6sv1vo3r]

The joy fidget us kinda sus

[@owlosaurus66]

How

[@gabriel25934]

Ilovi

[@jacksoncolleen2817]

Can you print my name my name is Gabriel

[@alexcavalcanticosta1585]

First of all, this report has nothing to do with the channel, it's just a rant about the 3D printing industry. Today, I bring a different perspective on 3D printers, based on the research I carried out. I came to a conclusion that I would like to share. I have a comment about the world of 3D printing, which, contrary to what some say about accessibility, is still a world for few. Despite the criticism I may receive for this, I believe that although printers have become more affordable, there is still a long way to go before they become an achievable dream for many people, including myself. It's not just the initial cost of the printer that must be considered. An often overlooked point is the ongoing cost of the filament. Just like in the early days of inkjet printers, where the price of ink was an obstacle, today we face similar challenges with filament. Even though printers have become a little cheaper, filament remains a considerable investment. It is notable that, over the years, we have not seen a significant reduction in filament prices (especially here in Brazil). There appears to be a lack of real competition, resulting in companies setting prices almost like a monopoly. Filament quality is also a concern, with reports of poor quality not justifying the investment. Another aspect that is rarely addressed is the amount of material wasted due to unsuccessful prints, especially for beginners. Even though errors decrease over time, they do not disappear completely. This is a relevant point to consider, as it contributes to additional costs and not to mention environmental issues. That's why I say it and I repeat, cast the first stone if anyone who has never been through this, even with vast experience, still continues to print with errors and has to do it all over again, no matter the printer or your knowledge, there will be errors and as a result waste of material and input costs. what we need and start thinking about this issue, well the filament should be cheaper or there should be a collection of inputs by suppliers especially those that went wrong or leftovers that new printers leave to make multicolor parts and why not buy return the material, it would help the person who bought it and nature thanks you. Antes de mais nada, este relato não tem nada a ver com o canal, é apenas um desabafo sobre o ramo de impressão 3d.Hoje, trago uma perspectiva diferente sobre impressoras 3D, baseada nas pesquisas que realizei. Cheguei a uma conclusão que gostaria de compartilhar. Tenho um comentário sobre o universo da impressão 3D, que, ao contrário do que alguns afirmam sobre a acessibilidade, ainda é um mundo para poucos. Apesar das críticas que posso receber por isso, acredito que, embora as impressoras tenham se tornado mais acessíveis, ainda há um longo caminho para que se tornem um sonho alcançável para muitas pessoas, incluindo eu mesmo. Não é apenas o custo inicial da impressora que deve ser considerado. Um ponto muitas vezes negligenciado é o custo contínuo do filamento. Assim como no início das impressoras a jato de tinta, onde o preço da tinta era um obstáculo, hoje enfrentamos desafios semelhantes com o filamento. Mesmo que as impressoras tenham ficado um pouco mais baratas, o filamento continua sendo um investimento considerável. É notável que, ao longo dos anos, não tenhamos visto uma redução significativa nos preços do filamento (principalmente aqui no Brasil). Parece haver uma falta de concorrência real, resultando em empresas que estabelecem preços quase como um monopólio. A qualidade do filamento também é uma preocupação, com relatos de baixa qualidade que não justificam o investimento. Outro aspecto pouco abordado é a quantidade de material desperdiçado devido a impressões mal sucedidas, especialmente para iniciantes. Mesmo que os erros diminuam com o tempo, não desaparecem completamente. Este é um ponto relevante a considerar, pois contribui para custos adicionais e sem falar das questões ambientais. por isso falo e repito , atire a primeira pedra quem nunca passou por isso ,mesmo com uma vasta experiência, ainda continua imprimindo com falhas e teve que fazer tudo de novo , não importa a impressora ou seu conhecimento , vai haver erros e como consequência desperdício de material e gastos com insumos. o que precisamos e começar a pensar sobre esta questão , poxa bem que o filamento deveria ser mais barato ou houvesse o recolhimento dos insumos por parte dos fornecedores principalmente aqueles que deram errado ou sobras que as novas impressoras deixam para fazer peças multicolor e porque não comprar de volta o material , ajudaria a pessoa que comprou e a natureza agradece.

[@mylacanzpoopyheadsummerhea1908]

You have much FreeTime. Which I need. °^°

[@chubbyche18]

alligator or crocodile - i reconside crocodile 🦖🦎🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊🐊

[@mylacanzpoopyheadsummerhea1908]

B o t h. As I insist that they are the same thing. *I say that I like both`*

[@mylacanzpoopyheadsummerhea1908]

don't mind me, just hanging around for likes.. >//

[@jacknickel7765]

That failed huh. Stop like begging

[@umitguneygunaydn8128]

turkish mi AS BAYRAKLARI AS AS