OSTER FAST FEED: HIGH TAPER FADE (FINE HAIR)

Second of the OSTER FAST FEED SERIES. Leave a comment down below if you have any questions, tips, recommendations to what I should teach, and simply show love to the kid! The taper fade is when you fade in the sides to any size to a higher size on top and finish it off with the taper.
EQUIPMENT USED:
$60 OSTER FAST FEED:
amzn.to/2DqPEm4
$50 WAHL DETAILERS:
amzn.to/2CZoOAn
WAHL 5 STAR SHAVER:
amzn.to/2mrfVJ2
STRAIGHT RAZOR:
amzn.to/2D8YO9j
RAZOR BLADES:
amzn.to/2DrU9wO
DISCLAIMER: This video contains affiliate links, which means if you click on one of the product links ill receive a small commission which helps support the channel to create great content. I appreciate the support!!

[@my240sx2]

At first I was like,”hell naw I ain’t listening to a barber with a bowl cut.” Then I brought up the brightness of my screen 😂😂😂

[@Arvinmalaca]

😭😂 I’m hella weak

[@TSupraLano]

Use the corner of the trimmer around the ear, only like that last 2 teeth. You will get a lot more precision

[@Arvinmalaca]

Advice from others always accepted💯 appreciate you g!

[@sgbabyflex]

This kid is clean with it. Needs more views . I've seen the big number youtubers and this kid explains it better in detail . Much love from El Paso TX.

[@Arvinmalaca]

I appreciate you big time brotha✊🏼 Im coming out with better quality videos soon!

[@kevinperez1674]

Bugs the hell out of me when barbers leave the bottom hairs for last 😭

[@Arvinmalaca]

Lol it all depends how I feel that day or haircut, nowadays I bald everything then blend down

[@TheGamer1661]

really nice fade, good hair made magic , shout out from the uk

[@Arvinmalaca]

THE UK!!! Thank you so much bro, I will be back with more knowledge to youtube in JULY!

[@terrellpartlow3899]

That was dope my boy...

[@Arvinmalaca]

More coming out in JULY for y'all, appreciate you my guy!

[@earthangelhealing8363]

Great video bro just started learning on fast feeds started with waul

[@ecapone4389]

Best taper toturial ive seen

[@derjck]

Can you link your guards

[@BIGNORM1031]

How long you been barbering? That nice job..I'm trying to be a barber too.

[@BIGNORM1031]

Dope shit bruh.

[@Arvinmalaca]

4 YEARS!!

[@cee4788]

I always get scared ima push the taper up too high so I just been practicing low tapers on myself but I still leave somewhat of a line

[@Arvinmalaca]

Trial and error, don’t be afraid to cut too much!

[@ahkeelcarter1791]

I have the same weakness. Fading from short to bulk

[@Arvinmalaca]

Ahkeel Carter Trial and Error results in growth, don’t be afraid to test out cutting more hair off as I found it to help me with bulk🤘🏽

[@rizavelesrubio7118]

Thank u brother . It helps me a lot . 🇵🇭🇵🇭🙌🙌

[@Arvinmalaca]

I’m glad I️ could help brotha, do your thang🙌🏽

[@skysk8r10]

Straight Smoke 💨

[@Arvinmalaca]

More of that coming in July! Been studying stuff for y'all!

[@sonat2008]

Do you find the lever on these clippers to be stiffer then others clippers

[@Arvinmalaca]

All clippers have a stiff lever when it’s brand new. Overtime it will loosen up

[@AjFitnessInc]

Are the fast feeds a .5 all the way open or a 1 all the way open ? because the box says “000 to 1 blade “ im coming from wahl clippers which at .5 when they fully open but with fast feeds the box says 000 to 1 please help

[@StikFiga]

I’m a a new student and these are the clippers we start with. What kind of guards are those? Thanks in advance.

[@alexlucero4318]

STIK FIGA these are double magnetic andis guards

[@Arvinmalaca]

STIK FIGA Andis Dual magnetic. These are the original guards as their are 3 different kinds of Andis magnetic guards. Apologies for late response!

[@carlosvaladez9084]

Do you know how to zero gap whal seniors

[@Arvinmalaca]

Yessir! I’ll do a video on that soon🙌🏽

[@DanielRuiz-ih3pk]

Nice work bro. Is there a link for the clipper guards you used?

[@manuelito2299]

were the fast feeds zero gapped?

[@sergiocortez2371]

Dope cut man

[@Arvinmalaca]

SERGIO CORTEZ APPRECIATE IT🙌🏽

[@imthatnigga8123]

Does anyone know why my fast feeds barely cut?

[@Arvinmalaca]

Im that nigga If it’s pulling hair try to take the blade apart, clean off the hair and oil right after. Go to maintain your clippers so it will last longer🙌🏽

[@imthatnigga8123]

VinBarber going to try it today bro thankyou!

[@danijeltadic9649]

What’s the closed 2 in comparison to 1 open. Would the one open leave a line in. Or is it just enough to not see a line? Of course in yours there’s no line but on my self I see a line and I think it’s the 1 open going to two closed?

[@Arvinmalaca]

Danijel Tadic Sadly we all go through this problem brotha lol. As a barber always trust the process of your guide system(how you fade guidelines) if the 1 open can’t blend the 2 closed, play with the lever and go between Halfway and open, if that doesn’t blend, change the lever to half way and so on. TRUST THE PROCESS

[@raymondoyos4160]

Yo man! dope cut are your clippers 0 gapped?

[@Arvinmalaca]

Thank you! But it is, with the Fast feeds its hard to zero gap without the Ceramic blade, so if you have trouble zero gapping fast feeds.. the ceramic blade is the way to go!

[@itaintme3603]

Can I still deliver a fade like this with my oster fast deeds not zero gapped?

[@Arvinmalaca]

Yes, but you need to have a lighter touch on the guidelines because if you set it too harsh it can be time consuming staring out. You’ll most likely need to use your liners to blend out the first initial bald line

[@itaintme3603]

VinBarber are corded seniors good? I been thinking about getting them but I don’t know how to zero gap it

[@Arvinmalaca]

Can’t go wrong with one of the OG clippers of the game, unfortunately I gave my corded seniors away to make a video but there should be plenty of videos on KZbin on how to zero gap them

[@itaintme3603]

VinBarber I’m sorry for asking so much questions, I’m getting into cutting hair , but what does zero gapping do to clippers? What does it help with?

[@Arvinmalaca]

I’ll be making a video about it👌🏽

[@dennismadison6281]

🔥🔥🔥

[@2ndNatureHairSolutions]

Its coo.

[@Arvinmalaca]

The '95 CA Barber Yadadda?! Thanks g, my cuts ain’t where I️ want me to be so I’m tryna progress everyday💈

[@infamous1ao]

Don't use alcohol to sanitize use witch haze or a tea tree oil or something similar don't use alcohol!

[@Arvinmalaca]

Thank you! I currently use a hair tonic my shop uses!

[@ysnantraxx7837]

Where can I buy some guards for the fast feed?

[@kadenhicks2510]

Believe it or not , beauty supply stores have all you need as guard wise

[@Arvinmalaca]

Leave a comment down below if you have any questions, tips, recommendations to what I should teach, and show love to the kid! And has anybody ever got zeeked?🤔

[@mjlathrop]

There’s an andis purple 1.5 guard?

[@Arvinmalaca]

No there isn’t, although if you’re using the 1 guard and you open the lever all the way then it’ll be a 1.5

[@IsshmanGarcia]

Yes there is. Came out last month. Here you go: www.barbersalon.com/barber-shop/attachment-guides-combs/andis-master-dual-magnet-2-pcs-comb-set-01420.html

[@IsshmanGarcia]

@@Arvinmalaca and actually, the 0 or 1/16 open fully is a 1.5, not the 1.

[@Arvinmalaca]

Sheesh thank you for helpin me out! I️ always was told I️t was the 1 open😩

[@IsshmanGarcia]

No Prob. Here you go: www.dropbox.com/s/jlar9h96l47iajg/ClipperGuys%20Andis%20Guard_Blade%20Chart%20UPDATED%202015.pdf?dl=0

[@fbonino9500]

Fast feeds or masters ?

[@Arvinmalaca]

In my opinion I love both clippers because you can hear when the clipper cuts the hair. It's good so you know what hairs are being cut and whats not. The masters heat up too fast for me so FAST FEEDS all day!

[@Arvinmalaca]

Ive only used masters when I first started, for now I say Fast feeds is my all time favorite! but I will give masters a try again

[@AM-lz2jr]

@@Arvinmalaca fast feed or wahl seniors?

[@lupesboo]

It was Milky 🥛

[@VDM32]

How do you stroke the blade to fade away a guide line? Like straight up against the hair or like in and out ?

[@Arvinmalaca]

cali Fifty It really depends on the hair type and shape of the head, Keep the blade flat agains the scalp and scoop out once you hit that guideline. If you still see a line go half a size down and use the corners of the blade

[@dfresh17]

Fire cut bro. Did you put the ceramic blade on your fast feed by any chance?

[@Arvinmalaca]

Appreciate you my man! Yes I did, can’t use the fast feeds without em. You usually can tell it’s a ceramic blade when the cutting blade is white

[@Ccruz165]

What ceramic blade u use .

[@edz1890]

nice, clean ,fresh, aka milky...lol

[@Arvinmalaca]

ed z appreciate it fam✊🏽

[@SoKrayzie]

flyy

[@Arvinmalaca]

Thank you!

[@najibtelha6351]

😟 pleaz gad give him 100 k

[@Arvinmalaca]

AMEN BROTHA🙏🏽 Appreciate the support!

[@harry9937]

TOIT bro

[@danielv1607]

Lmao milky gtfo