Tutorial on how to change your regular blade to a ceramic blade and zero gap your Oster Fast Feeds Get the Andis Ceramic Blade goo.gl/P1fn1e Check out my new website www.thebarberteezy.com
Пікірлер: 121
@lakerboy168 ай бұрын
Thanks man!
7 жыл бұрын
awesome vid
@martinvillegashernandez67203 жыл бұрын
Thank you!
@milijanb2 жыл бұрын
Great tutorial 😉😉
@cloxberg5 жыл бұрын
dude when i replaced the blade i didn't push the plate forward when screwing it back in and it kept pulling hair (thought i broke it).. thanks to this video, its all fixed and i came close to buying a new pair of clippers... lol thanks again!
@ogwasabij2524 жыл бұрын
Clox Berg lmao same I’m new to this
@jonnypollo67823 жыл бұрын
I bought a different “branded” ceramic blade and every time I put it on my oster fast feeds after a min or so while on everything pops off idk if it’s bc it’s not the andis or I did it incorrectly
@thedonkilluminati29245 жыл бұрын
What was the point of taking off the grey piece?
@liljohnny56665 жыл бұрын
Frs huh😂
@TheBarberTeezy5 жыл бұрын
Information
@liljohnny56665 жыл бұрын
@@TheBarberTeezy gotchu
@experienceprecision54065 жыл бұрын
When you zero gap you lose some length. So lever open changes.
@jkicks7553 жыл бұрын
True but if you’re zero gapping in the first place, isnt that what you expect
@Pj1921305 жыл бұрын
Can the fast feed clipper with ceramic blade be use to trim and cut beards in other words adjust the blade to even the beard down to let’s say a 1 or 2 blade cut.
@TheBarberTeezy5 жыл бұрын
You will still need to use a guard for precise measurement on your cut
@Nompas4 жыл бұрын
For some reason whenever I put on the ceramic blade, the blade is to long and it’s longer than the metal one causing it to cut skin, can someone please help? I’ve tried adjusting the lever and trying to push the metal blade as far as you can.
@saulbntz885 жыл бұрын
Will this ceramic model you have fit the Osner Classic 76?
@Cutsbycarl6 жыл бұрын
I put the ceramic blade on and the middle is zero gapped but the corners got a little space between em lol any help ?
@MrColimon256 жыл бұрын
I went to the link it ssys dog clippers do they fit the regular fast feeds
@TheBarberTeezy6 жыл бұрын
Luis Cortez yes it fits. It’s the exact blade I used
@bentesla82036 жыл бұрын
Does anyone know what the difference between the medium and course cutter is?; in terms of how they cut.
@sp37506 жыл бұрын
the medium is ass, it cuts hare shitter than the stock blade... the coarse cutter is sharper imo
@akuma4u4 жыл бұрын
I use to dry shave with a zero gapped ceramic fade blade...now i have scars on my face.
@guillermopena52174 жыл бұрын
I zero gapped my fast feeds with the course cutter and it works good only problem is when I open the lever all the way it makes a loud noise any tips to fix that ??
@mike23239094 жыл бұрын
Guillermo Pena I was looking for this comment right here... I bought that same andis ceramic blade and put it on my Topaz aka fast feed and when I open the blade all the way up it hits the side of the lever and completely stops moving... took that out right away... I found the oster ceramic blade on amazon gonna see how that goes
@Nompas4 жыл бұрын
Michael Manzano Jr. Hey, how did it work?
@mike23239094 жыл бұрын
Nompas works like a charm... literally just did a tapper on myself with them.. super clean
@brianmcreynolds24312 жыл бұрын
@@mike2323909 was it from the Oster 1A detachable blade? I just ordered a paid fast feeds from Amazon, with the andis coarse ceramic blade along with the double magnetic guards. It seems like there are mixed reviews on the andis ceramic blade…pulling hair…not moving with the adjustment open etc etc. I’m tempted to just cut my hair with the fast feed as is and see how it does before I swap the cutting blade out.
@mike23239092 жыл бұрын
@@brianmcreynolds2431 definitely try them out without and put the ceramic blades on and see how you like those 🤙🏽
@luisvaldez60725 жыл бұрын
So I bought the ceramic blade and when I put on the guard and turn on the clippers the hit on the side of the guard. Note I have the andis single magnet guard. If I buy the the double magnetic guards will this problem go away?
@TheBarberTeezy5 жыл бұрын
I’m not sure why it would be hitting the sides. Try and make sure your blade are centered. It sounds like you have the blade to far to one side so I don’t think changing the guard will help
@richardchen27794 жыл бұрын
did you ever figure it out? I have the same problem
@richardchen27794 жыл бұрын
Nevermind, I found and fixed the problem: it is not the ceramic blade that is the problem, but rather its your steel outer blade that needs to be centered with the ceramic blade. Move the outer blade around until it does not hit the guards anymore. Hope this helps.
@jessthebarber7 жыл бұрын
what was that sound when you had it all the way open?
@TheBarberTeezy7 жыл бұрын
Jess The Barber I had the lever tweaked a little bit so the blade was a little off. It's fixed now
@jessthebarber7 жыл бұрын
The Barber Teezy oh I see, thank you
@mikecarter5235 жыл бұрын
I own pair of fast feeds, they are not the best for low tapers. If I add the ceramic blade will that help make the initial guideline closer. If not I will just go buy a pair of wahl seniors or masters
@christoforosxenofontos94303 жыл бұрын
The best blade master or fast feed? Which is the best for blend and what as the difference?
@cogsandcaffeine3 жыл бұрын
I also ran into the problem of the ceramic blade (Andis coarse) not moving when the screws of the fixed blade are tightened fully or the lever is pulled back for longer gap. The problem is that the ceramic blade has a thicker „hump“ in the middle than the stock blade and the metal slide carriage where the fixed blade is screwed in doesn‘t have the perfect alignment, meaning there‘s too much pressure on the ceramic blade and it gets blocked. I helped myself by cutting a strip of paper (100g weight from my printer), put two holes in and installed the fixed blade on the carriage with the paper strip below. Problem solved.
@thomasmorgan21684 жыл бұрын
The Amazon link for the Andis Ceramic Coarse Cutter seems to be price gouging - $52.99 vs. Atlanta Beauty and Barber Supply shows Andis brand at $10.25. I've seen others at perhaps cheaper - in addition to seeing non-Andis at less with some cautionary reviews. I have an Oster (not the 76 or Fast Feed- was a big box residential set - been using 30+ years?) that seems to have just died on me so I just ordered a fast feed. I have very fine blonde & gray "sparseish" hair - I've used a combination of 2, 3, 4 plus the angled combs, then the straight for my neckline for years. As the hair has gotten thinner it's sometimes taken more to cut it and more prone to snaging. I'll admit I didn't oil it regularly. It looks like the ceramic sharper cut notes say it doesn't snag like the stock blade can in my type hair? I also see a medium for less than 0A - with the coarse for 0A and larger. Is that just for very close cutting? I'm trying to understand the differences and what might be best for me.
@marcusowens17354 жыл бұрын
Just hit up chewy.com bro it's for pets but they sell allot of product barbers can also use..I also just got a fast feed..chewy has the andis ceramic blade for like 9 bucks with shipping it came out to like 16 bucks..🤝
@DonQuixote1094 жыл бұрын
@@marcusowens1735 Thanks! I wondered about that.
@marcusowens17354 жыл бұрын
@@DonQuixote109 yeah bronies was curious too about the medium and coarse differences too but from what I seen most barbers and professionals use the coarse one. I went with it too..best of luck g bless 🤝 *bro I was curious
@alextorres20406 жыл бұрын
Mine stop cutting hair when the lever is fully closed and they are zeroed perfect..any advice?
@TheBarberTeezy6 жыл бұрын
Alex Torres I’m not sure why they would stop cutting when closed. Does the blade stop moving or do they just pull and snag hair? Is the blade fully set in right?
@sp37506 жыл бұрын
yeah same thing happened to me, so i held it at a closed position then unscrewed the lever pulled the metal tab for the lever slightly back but enough so that the screw can go backthen rescrewed it back on making sure the lever lined up...follow the guide on youtube channel the barber stable...if that doesn't work youll have to sand a bit off...but luckily i didnt have to sand anything
@CumminsN14DBest4 жыл бұрын
Say Dawg, Can You Help me with something,.. I Have to original Oster Fast Feed and I Noticed the clipper blades are Sticking/Freezing in my hair and Not Cutting Through (unLike They did when I First Bought Them?! They Cut Was Smooooooth! 1.5 - 2.5 Length, Didn't Matter) My Hair Length is Like a 1.5 Now, Is There a Solution To This Problem? What's The Best Blade combo For ZERO gap and Anti-Rust/Anti Corrosion? I Use Andis COOL Care And The BLADES Still RUST and Corrosion Is Present?! Hmmm,.. I Thinks I HAVE THE WRONG BLADES, Please gimmie the 4-1-1 to fix this problem ASAP! Stay Safe & Healthy Brotha!!
@TheBarberTeezy4 жыл бұрын
i would recommend just purchasing a new set of blades, im not sure why they are rusting so badly though
@dermuslimkoranlove77543 жыл бұрын
Can I use any ceramic blades from andis or do I need to buy a certain one? God bless🙏🏼
@donjekdemarco49005 жыл бұрын
Y does everybody make a big deal out of the bar piece on top?? Just dont touch it, dnt take it out. Remove the blades, adjust, clean, oil up, n good to go meng... good video tho
@thomasm.batessr.69505 жыл бұрын
the bar piece puts pressure on the blade to make these cut better.Lost my bar and they wouldnt hardly cut when i realized what the bar was for i cut 2 hard yellow earplugs rolled and stuffed them where the bar used to be now they cut way better then with the bar in because i have more pressure on the blade
@karlkrass86454 жыл бұрын
I agree! Why take the gray bar out if it's underneath the new replacement blade and doesn't require removal?
@tweetymeza34816 жыл бұрын
Do they sell the little stick that makes your fast feeds quiet anywhere? I FRIKN lost mine
@TheBarberTeezy6 жыл бұрын
D Savage 2700 not that I know of but you can try and call oster
@robertrosa37796 жыл бұрын
I found the parts on Ebay. Here's a link: www.ebay.com/itm/Oster-Fast-Feed-Model-23-Replacement-Parts-Lever-Blade-screws-Tension-Spg/152936274951?hash=item239bb65c07:g:HIYAAOSwll1Wxnad
@robertrosa37796 жыл бұрын
If you just need that piece tho, they sell it without the screws for a bit cheaper. Here's a link: www.ebay.com/itm/Oster-Fast-Feed-Model-23-Guide-Spring-Plus-extra-Blade-Guide/282629607306?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D44039%26meid%3D50e65039ce5d44c2b0a268d54c039ae1%26pid%3D100623%26rk%3D2%26rkt%3D6%26sd%3D152936274951%26itm%3D282629607306&_trksid=p2047675.c100623.m-1
@jvee310_5 жыл бұрын
Shit don’t work they pull hair I put ceramic blade on my fast feed and it pulls doesn’t cut like a magic clipper
@williebgoodtoot6 жыл бұрын
Why not add Five Points of oil before turning the Clipper.
@jsamarin814 жыл бұрын
if you want to lose the vibrating noise that it makes when it's open that little bar a peace that metal piece that it sits on pull that away from the clipper clipper is just a little bit it's going to make it tighter to the bigger blade and move twice as fast,ceramic is much lighter then metal there for really bringing these clippers alive
@knot_arman80273 жыл бұрын
Wtf did you just say
@a.g.a63442 жыл бұрын
i lost the black bar and my blade has me sliding constantly no matter how much I tighten the screws
@chargerdiego11857 жыл бұрын
I did that but when I open it to the 1 It stops working
@TheBarberTeezy7 жыл бұрын
Diego Vasquez check the lever Position when you attach the fixed blade. If it's off it will cause problems when you move it to the open position
@salsedafamilyadventures77306 жыл бұрын
Use a OA ceramic Blade and some time u got to file the edges down when u take of the blade there’s 2 curves on each side file those down it will give it more room
@DiMiTri-ys7ei4 жыл бұрын
I don't understand why you took the Graybar off when you just put it right back on was that even necessary or should you have just left that thing alone
@TheBarberTeezy4 жыл бұрын
I took it off to show the importance of not losing it
@dougruemiles15546 жыл бұрын
Why no talking about once u put it on, & tighten why it stops vibrating
@bryceallen07075 жыл бұрын
needs to be oiled up
@sebastianmystic4117 жыл бұрын
hi
@illz093 жыл бұрын
Do you lube them the same
@DoritosResidue6 жыл бұрын
I just purchased the pet and human ceramic blade for my fast feeds. I kid you not they are the exact same. So I returned the one for the humans. The pet one is like 5 dollar's cheaper. Both from Amazon. This blade is king!
@TheBarberTeezy6 жыл бұрын
Mark Navarro that’s crazy! That good to know though!
@ricardocampos59706 жыл бұрын
hey bro after i installed the ceramic blade and tighten the screws is it suppose move?
@TheBarberTeezy6 жыл бұрын
Ricardo Campos is what supposed to move? It should be just like before just a different cutting blade. The cutting blade should move side to side as normal and the still blade should move forward and back when adjusting the lever
@ricardocampos59706 жыл бұрын
The Barber Teezy so the bottom blade the ceramic one is suppose to go side to side?
@TheBarberTeezy6 жыл бұрын
Ricardo Campos yes the ceramic blade should move side to side
@ricardocampos59706 жыл бұрын
thanks bro The Barber Teezy
@TheBarberTeezy6 жыл бұрын
Anytime man
@Jayde10276 жыл бұрын
When I click the link to the Andis blade, I see there are HELLA options under the "style" drop box. Is the "course" option the one we want?
@TheBarberTeezy6 жыл бұрын
Chealsea Hayes yes. Select the coarse cutter blade
@BirdWhisperer464 жыл бұрын
Do you oil this new blade?
@TheBarberTeezy4 жыл бұрын
Yes definitely
@BirdWhisperer464 жыл бұрын
@@TheBarberTeezy OK thanks, thought so, just checking.
@elvergahso45637 жыл бұрын
Hello, I just recently installed my ceramic blade but now my andis purple guards fit too big. Any advice ??
@TheBarberTeezy7 жыл бұрын
jordy cuzco your cutting blade wouldn't affect the way your guards fit. I'm not sure what you've changed
@crf450rbulletdavid95 жыл бұрын
You want to tighten the screws until it’s just teezy.
@Grisostomo062 жыл бұрын
Dude, why did you take off that gray bar at the beginning of the video when it needs to be in the clipper before the ceramic blade can be installed? It doesn't make any sense.
@jonnypollo67823 жыл бұрын
Hi I did the zero gap but the blades keep moving around even though I screwed the screws in tightly. Any recommendations?
@jonnypollo67823 жыл бұрын
I bought a ceramic blade that isn’t andis is that the problem?
@themosthigh_wil39454 жыл бұрын
That joint $35?
@corgimas7 жыл бұрын
Why upgrade to ceramic? Longer life? Longer sharp?
@TheBarberTeezy7 жыл бұрын
corgimas upgrading to ceramic has a few benefits. The blade is sharper and doesn't dull as fast, smoother cutting, the blade doesn't heat up so the blades stay cool and also adding the ceramic blade allows you to zero gap the clipper for a closer cut
@veritas20224 жыл бұрын
Is that ceramic blade used for pet groomers too?
@DwsnMurce5 жыл бұрын
👍🏾👍🏾
@scenestealer0075 жыл бұрын
Video is frustratingly blurry for most of it. I couldn't finish watching, but thanks for the video either way.
@SwiftLikesGames5 жыл бұрын
This guy didn’t adjust them properly First u gotta make sure the ceramic blade sits center and straight which is hard but get it very close to straight Put on the guard blade and screw it in make sure it is straight from left to right and make sure when u turn it on the blade isn’t moving far from the edge of the guard blade Then make sure to pull the lever down and up to see if it stays the same Now when u pull the lever all the way open it makes that funny sound, this means u adjusted it wrong and gotta straighten it out more Put the clipper on under a light or something while it’s running so u can see what side of the blade is sticking far out
@adge5054 жыл бұрын
XoP NGK hey thank you so much. Not sure you will see this but again thank you for this.
@noneknwsbrah3 жыл бұрын
Complete 🗑 of a product. I tried so many times to align it properly and it looks perfect. Its on the spot and it still makes farting loud as a mfo when I turn it on. I'm returning this shit.
@SwiftLikesGames3 жыл бұрын
Eddie it only makes a different sound for me when I open the lever all the way open but everything else is straight
@noneknwsbrah3 жыл бұрын
@@SwiftLikesGames not for me. No matter what level it's on its loud buzzing that's unbearable..
@SwiftLikesGames3 жыл бұрын
Eddie try re adjust it properly and make sure the ceramic blade lines up straight with the clippers because in the video , his one didn’t
@adge5054 жыл бұрын
Appears they don’t take off bulk
@eddieah62134 жыл бұрын
Mine keeps cutting me .. any suggestions
@keyaank14834 жыл бұрын
Eddie Ah make sure that the ceramic blade is behind the guiding blade.
@mmitch82365 жыл бұрын
Why did u take the grey piece off in the first place
@TheBarberTeezy5 жыл бұрын
To show the importance of not losing it Incase someone else took it off
@mmitch82365 жыл бұрын
Oh ok, I just now install my course cutter in the machine and it looks good. Thanks